/* bsp.h * * This include file contains all DMV152 board IO definitions. * * COPYRIGHT (c) 1989-1997. * On-Line Applications Research Corporation (OAR). * Copyright assigned to U.S. Government, 1994. * * The license and distribution terms for this file may in * the file LICENSE in this distribution or at * http://www.OARcorp.com/rtems/license.html. * * $Id$ */ #ifndef __DMV152_h #define __DMV152_h #ifdef __cplusplus extern "C" { #endif #include #include #include #include #include #include #include /* * Define the time limits for RTEMS Test Suite test durations. * Long test and short test duration limits are provided. These * values are in seconds and need to be converted to ticks for the * application. * */ #define MAX_LONG_TEST_DURATION 300 /* 5 minutes = 300 seconds */ #define MAX_SHORT_TEST_DURATION 3 /* 3 seconds */ /* * Define the interrupt mechanism for Time Test 27 */ /* use a VMEbus interrupt */ #define MUST_WAIT_FOR_INTERRUPT 1 #define Install_tm27_vector( handler ) \ { \ set_vector( (handler), 0x50, 1 ); \ (*(volatile rtems_unsigned32 *)0x0d800024) = 0x50; /* set IVECT reg */ \ (*(volatile rtems_unsigned8 *)0x0d00000c) = 0x40; /* set VIE reg */ \ } #define Cause_tm27_intr() \ (*(volatile rtems_unsigned8 *)0x0d000003) = 0x0f /* set VINT */ #define Clear_tm27_intr() /* no operation necessary */ #define Lower_tm27_intr() /* * Simple spin delay in microsecond units for device drivers. * This is very dependent on the clock speed of the target. */ #define delay( microseconds ) \ { register rtems_unsigned32 _delay=(microseconds); \ register rtems_unsigned32 _tmp=123; \ asm volatile( "0: \ nbcd %0 ; \ nbcd %0 ; \ dbf %1,0b" \ : "=d" (_tmp), "=d" (_delay) \ : "0" (_tmp), "1" (_delay) ); \ } /* macros */ #undef Z8x36_STATE0 #undef Z8x36_WRITE #undef Z8x36_READ #define Z8x36_STATE0 ( z8536 ) \ { char *garbage; \ (garbage) = *(VOL8(z8536+0x7)) \ } #define Z8x36_WRITE( z8536, reg, data ) \ *(VOL8(z8536+0x7)) = (reg); \ *(VOL8(z8536+0x7)) = (data) #define Z8x36_READ( z8536, reg, data ) \ *(VOL8(z8536+0x7)) = (reg); \ (data) = *(VOL8(z8536+0x7)) /* * ACC Register Addresses */ #define ACC_BASE 0x0D000000 #define ACC_STAT0 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x00)) #define ACC_STAT1 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x01)) #define ACC_GENCTL ((volatile rtems_unsigned8 *) (ACC_BASE + 0x02)) #define ACC_VINT ((volatile rtems_unsigned8 *) (ACC_BASE + 0x03)) #define ACC_VREQ ((volatile rtems_unsigned8 *) (ACC_BASE + 0x04)) #define ACC_VARB ((volatile rtems_unsigned8 *) (ACC_BASE + 0x05)) #define ACC_ID ((volatile rtems_unsigned8 *) (ACC_BASE + 0x06)) #define ACC_CTL2 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x07)) #define ACC_7IS ((volatile rtems_unsigned8 *) (ACC_BASE + 0x08)) #define ACC_LIS ((volatile rtems_unsigned8 *) (ACC_BASE + 0x09)) #define ACC_7IE ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0A)) #define ACC_LIE ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0B)) #define ACC_VIE ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0C)) #define ACC_IC10 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0D)) #define ACC_IC32 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0E)) #define ACC_IC54 ((volatile rtems_unsigned8 *) (ACC_BASE + 0x0F)) /* constants */ #define RAM_START 0 #define RAM_END 0x100000 #define USE_CHANNEL_A 0 /* 1 = use channel A for console */ #define USE_CHANNEL_B 1 /* 1 = use channel B for console */ #define TIMER 0x0c000000 #define TIMER_VECTOR 0x4D #if (USE_CHANNEL_A == 1) #define CONSOLE_CONTROL 0x0C800007 #define CONSOLE_DATA 0x0C800005 #elif (USE_CHANNEL_B == 1) #define CONSOLE_CONTROL 0x0C800001 #define CONSOLE_DATA 0x0C800003 #endif /* Structures */ #ifdef D152_INIT #undef EXTERN #define EXTERN #else #undef EXTERN #define EXTERN extern #endif /* miscellaneous stuff assumed to exist */ extern rtems_configuration_table BSP_Configuration; extern m68k_isr_entry M68Kvec[]; /* vector table address */ /* * Device Driver Table Entries */ /* * NOTE: Use the standard Console driver entry */ /* * NOTE: Use the standard Clock driver entry */ /* * How many libio files we want */ #define BSP_LIBIO_MAX_FDS 20 /* functions */ void bsp_cleanup( void ); m68k_isr_entry set_vector( rtems_isr_entry handler, rtems_vector_number vector, int type ); #ifdef __cplusplus } #endif #endif /* end of include file */