1 | ## Process this file with autoconf to produce a configure script. |
---|
2 | ## |
---|
3 | ## $Id$ |
---|
4 | |
---|
5 | AC_PREREQ(2.60) |
---|
6 | AC_INIT([rtems-c-src-lib-libbsp-lm32-lm32_evr],[_RTEMS_VERSION],[http://www.rtems.org/bugzilla]) |
---|
7 | AC_CONFIG_SRCDIR([bsp_specs]) |
---|
8 | RTEMS_TOP(../../../../../..) |
---|
9 | |
---|
10 | RTEMS_CANONICAL_TARGET_CPU |
---|
11 | AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.10]) |
---|
12 | RTEMS_BSP_CONFIGURE |
---|
13 | |
---|
14 | RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]) |
---|
15 | RTEMS_CANONICALIZE_TOOLS |
---|
16 | RTEMS_PROG_CCAS |
---|
17 | |
---|
18 | RTEMS_CHECK_NETWORKING |
---|
19 | |
---|
20 | AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes") |
---|
21 | |
---|
22 | RTEMS_BSPOPTS_SET([ON_SIMULATOR],[*],[]) |
---|
23 | RTEMS_BSPOPTS_HELP([ON_SIMULATOR], |
---|
24 | [If defined, this indicates the BSP is being built to run on the lm32 |
---|
25 | simulator in GDB. This enables fast idle support which speeds up the |
---|
26 | clock ticks while the idle task is running so time spent in the idle |
---|
27 | task is minimized. This significantly reduces the wall time required |
---|
28 | to execute the RTEMS test suites. It also enables a special exit and |
---|
29 | alternate printk support.]) |
---|
30 | |
---|
31 | RTEMS_BSPOPTS_SET([BSP_PRESS_KEY_FOR_RESET],[*],[0]) |
---|
32 | RTEMS_BSPOPTS_HELP([BSP_PRESS_KEY_FOR_RESET], |
---|
33 | [If defined, print a message and wait until pressed before resetting |
---|
34 | board when application exits.]) |
---|
35 | |
---|
36 | RTEMS_BSPOPTS_SET([BSP_RESET_BOARD_AT_EXIT],[*],[0]) |
---|
37 | RTEMS_BSPOPTS_HELP([BSP_RESET_BOARD_AT_EXIT], |
---|
38 | [If defined, reset the board when the application exits.]) |
---|
39 | |
---|
40 | # Explicitly list all Makefiles here |
---|
41 | AC_CONFIG_FILES([Makefile]) |
---|
42 | AC_OUTPUT |
---|