source: rtems/c/src/lib/libbsp/i386/pc386/include/wd80x3.h @ fa01e0d0

/**
 * @file
 *
 * @ingroup i386_pc386
 *
 * @brief DP8390 Ethernet controller definitions.
 */

/*
 *  Information about the DP8390 Ethernet controller.
 */

#ifndef __BSP_WD80x3_h
#define __BSP_WD80x3_h

/* Register descriptions */
/* Controller DP8390.    */

#define DATAPORT        0x10    /* Port Window. */
#define RESET           0x1f    /* Issue a read for reset */
#define W83CREG         0x00    /* I/O port definition */
#define ADDROM          0x08

/* page 0 read or read/write registers */

#define CMDR            0x00+RO
#define CLDA0           0x01+RO /* current local dma addr 0 for read */
#define CLDA1           0x02+RO /* current local dma addr 1 for read */
#define BNRY            0x03+RO /* boundary reg for rd and wr */
#define TSR             0x04+RO /* tx status reg for rd */
#define NCR             0x05+RO /* number of collision reg for rd */
#define FIFO            0x06+RO /* FIFO for rd */
#define ISR             0x07+RO /* interrupt status reg for rd and wr */
#define CRDA0           0x08+RO /* current remote dma address 0 for rd */
#define CRDA1           0x09+RO /* current remote dma address 1 for rd */
#define RSR             0x0C+RO /* rx status reg for rd */
#define CNTR0           0x0D+RO /* tally cnt 0 for frm alg err for rd */
#define CNTR1           RO+0x0E /* tally cnt 1 for crc err for rd */
#define CNTR2           0x0F+RO /* tally cnt 2 for missed pkt for rd */

/* page 0 write registers */

#define PSTART          0x01+RO /* page start register */
#define PSTOP           0x02+RO /* page stop register */
#define TPSR            0x04+RO /* tx start page start reg */
#define TBCR0           0x05+RO /* tx byte count 0 reg */
#define TBCR1           0x06+RO /* tx byte count 1 reg */
#define RSAR0           0x08+RO /* remote start address reg 0  */
#define RSAR1           0x09+RO /* remote start address reg 1 */
#define RBCR0           0x0A+RO /* remote byte count reg 0 */
#define RBCR1           0x0B+RO /* remote byte count reg 1 */
#define RCR             0x0C+RO /* rx configuration reg */
#define TCR             0x0D+RO /* tx configuration reg */
#define DCR             RO+0x0E /* data configuration reg */
#define IMR             0x0F+RO /* interrupt mask reg */

/* page 1 registers */

#define PAR             0x01+RO /* physical addr reg base for rd and wr */
#define CURR            0x07+RO /* current page reg for rd and wr */
#define MAR             0x08+RO /* multicast addr reg base fro rd and WR */
#define MARsize 8               /* size of multicast addr space */

/*-----W83CREG command bits-----*/
#define MSK_RESET  0x80         /* W83CREG masks */
#define MSK_ENASH  0x40
#define MSK_DECOD  0x3F         /* memory decode bits, corresponding */
                                /* to SA 18-13. SA 19 assumed to be 1 */

/*-----CMDR command bits-----*/
#define MSK_STP         0x01    /* stop the chip */
#define MSK_STA         0x02    /* start the chip */
#define MSK_TXP         0x04    /* initial txing of a frm */
#define MSK_RRE         0x08    /* remote read */
#define MSK_RWR         0x10    /* remote write */
#define MSK_RD2         0x20    /* no DMA used */
#define MSK_PG0         0x00    /* select register page 0 */
#define MSK_PG1         0x40    /* select register page 1 */
#define MSK_PG2         0x80    /* select register page 2 */

/*-----ISR and TSR status bits-----*/
#define MSK_PRX         0x01    /* rx with no error */
#define MSK_PTX         0x02    /* tx with no error */
#define MSK_RXE         0x04    /* rx with error */
#define MSK_TXE         0x08    /* tx with error */
#define MSK_OVW         0x10    /* overwrite warning */
#define MSK_CNT         0x20    /* MSB of one of the tally counters is set */
#define MSK_RDC         0x40    /* remote dma completed */
#define MSK_RST         0x80    /* reset state indicator */

/*-----DCR command bits-----*/
#define MSK_WTS         0x01    /* word transfer mode selection */
#define MSK_BOS         0x02    /* byte order selection */
#define MSK_LAS         0x04    /* long addr selection */
#define MSK_BMS         0x08    /* burst mode selection */
#define MSK_ARM         0x10    /* autoinitialize remote */
#define MSK_FT00        0x00    /* burst lrngth selection */
#define MSK_FT01        0x20    /* burst lrngth selection */
#define MSK_FT10        0x40    /* burst lrngth selection */
#define MSK_FT11        0x60    /* burst lrngth selection */

/*-----RCR command bits-----*/
#define MSK_SEP         0x01    /* save error pkts */
#define MSK_AR          0x02    /* accept runt pkt */
#define MSK_AB          0x04    /* 8390 RCR */
#define MSK_AM          0x08    /* accept multicast  */
#define MSK_PRO         0x10    /* accept all pkt with physical adr */
#define MSK_MON         0x20    /* monitor mode */

/*-----TCR command bits-----*/
#define MSK_CRC         0x01    /* inhibit CRC, do not append crc */
#define MSK_LOOP        0x02    /* set loopback mode */
#define MSK_BCST        0x04    /* Accept broadcasts */
#define MSK_LB01        0x06    /* encoded loopback control */
#define MSK_ATD         0x08    /* auto tx disable */
#define MSK_OFST        0x10    /* collision offset enable  */

/*-----receive status bits-----*/
#define SMK_PRX   0x01          /* rx without error */
#define SMK_CRC   0x02          /* CRC error */
#define SMK_FAE   0x04          /* frame alignment error */
#define SMK_FO    0x08          /* FIFO overrun */
#define SMK_MPA   0x10          /* missed pkt */
#define SMK_PHY   0x20          /* physical/multicase address */
#define SMK_DIS   0x40          /* receiver disable. set in monitor mode */
#define SMK_DEF   0x80          /* deferring */

/*-----transmit status bits-----*/
#define SMK_PTX   0x01          /* tx without error */
#define SMK_DFR   0x02          /* non deferred tx */
#define SMK_COL   0x04          /* tx collided */
#define SMK_ABT   0x08          /* tx abort because of excessive collisions */
#define SMK_CRS   0x10          /* carrier sense lost */
#define SMK_FU    0x20          /* FIFO underrun */
#define SMK_CDH   0x40          /* collision detect heartbeat */
#define SMK_OWC   0x80          /* out of window collision */

#endif
/* end of include */