source: rtems/c/src/lib/libbsp/i386/pc386/include/bsp.h @ 6ff7e2c

/*-------------------------------------------------------------------------+
| bsp.h v1.1 - PC386 BSP - 1997/08/07
+--------------------------------------------------------------------------+
| This include file contains definitions related to the PC386 BSP.
+--------------------------------------------------------------------------+
| (C) Copyright 1997 -
| - NavIST Group - Real-Time Distributed Systems and Industrial Automation
|
| http://pandora.ist.utl.pt
|
| Instituto Superior Tecnico * Lisboa * PORTUGAL
+--------------------------------------------------------------------------+
| Modified by Eric Valette the 20/05/98 in order to add definitions used
| to enhance video putchar capabilities.
|
| Copyright (C) 1998  valette@crf.canon.fr
|
| Canon Centre Recherche France.
|
+--------------------------------------------------------------------------+
| Disclaimer:
|
| This file is provided "AS IS" without warranty of any kind, either
| expressed or implied.
+--------------------------------------------------------------------------+
| This code is based on:
|   bsp.h,v 1.5 1995/12/19 20:07:30 joel Exp - go32 BSP
| With the following copyright notice:
| **************************************************************************
| *  COPYRIGHT (c) 1989-1999.
| *  On-Line Applications Research Corporation (OAR).
| *
| *  The license and distribution terms for this file may be
| *  found in found in the file LICENSE in this distribution or at
| *  http://www.OARcorp.com/rtems/license.html.
| **************************************************************************
|
|  $Id$
+--------------------------------------------------------------------------*/


#ifndef __BSP_H_
#define __BSP_H_

#ifdef __cplusplus
extern "C" {
#endif

#include <bspopts.h>

#include <rtems.h>
#include <iosupp.h>
#include <console.h>
#include <clockdrv.h>
#include <libcpu/cpu.h>
#include <rtems/bspIo.h>
  
/*
 *  confdefs.h overrides for this BSP:
 *   - number of termios serial ports
 *   - Interrupt stack space is not minimum if defined.
 */

#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 1

#if STACK_MINIMUM_SIZE < (4 * 1024)
#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
#else
#define CONFIGURE_INTERRUPT_STACK_MEMORY STACK_MINIMUM_SIZE
#endif

/*
 * Network driver configuration
 */

struct rtems_bsdnet_ifconfig;

extern int rtems_ne_driver_attach(struct rtems_bsdnet_ifconfig *, int);
#define BSP_NE2000_NETWORK_DRIVER_NAME      "ne1"
#define BSP_NE2000_NETWORK_DRIVER_ATTACH    rtems_ne_driver_attach

extern int rtems_wd_driver_attach(struct rtems_bsdnet_ifconfig *, int);
#define BSP_WD8003_NETWORK_DRIVER_NAME      "wd1"
#define BSP_WD8003_NETWORK_DRIVER_ATTACH    rtems_wd_driver_attach

extern int rtems_dec21140_driver_attach(struct rtems_bsdnet_ifconfig *, int);
#define BSP_DEC21140_NETWORK_DRIVER_NAME    "dc1"
#define BSP_DEC21140_NETWORK_DRIVER_ATTACH  rtems_dec21140_driver_attach

#ifndef RTEMS_BSP_NETWORK_DRIVER_NAME
#define RTEMS_BSP_NETWORK_DRIVER_NAME   BSP_DEC21140_NETWORK_DRIVER_NAME
#endif

#ifndef RTEMS_BSP_NETWORK_DRIVER_ATTACH
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH BSP_DEC21140_NETWORK_DRIVER_ATTACH
#endif

/*-------------------------------------------------------------------------+
| Constants
+--------------------------------------------------------------------------*/
#define BSP_LIBIO_MAX_FDS 20             /* Number of libio files we want.    */

/*-------------------------------------------------------------------------+
| Video (console) related constants.
+--------------------------------------------------------------------------*/

#include <crt.h>  
  
/*-------------------------------------------------------------------------+
| Constants relating to the 8254 (or 8253) programmable interval timers.
+--------------------------------------------------------------------------*/
#define IO_TIMER1      0x40
                  /* Port address of the control port and timer channels */
#define TIMER_CNTR0    (IO_TIMER1 + 0) /* timer 0 counter port           */
#define TIMER_CNTR1    (IO_TIMER1 + 1) /* timer 1 counter port           */
#define TIMER_CNTR2    (IO_TIMER1 + 2) /* timer 2 counter port           */
#define TIMER_MODE     (IO_TIMER1 + 3) /* timer mode port                */
#define TIMER_SEL0     0x00            /* select counter 0               */
#define TIMER_SEL1     0x40            /* select counter 1               */
#define TIMER_SEL2     0x80            /* select counter 2               */
#define TIMER_INTTC    0x00            /* mode 0, intr on terminal cnt   */
#define TIMER_ONESHOT  0x02            /* mode 1, one shot               */
#define TIMER_RATEGEN  0x04            /* mode 2, rate generator         */
#define TIMER_SQWAVE   0x06            /* mode 3, square wave            */
#define TIMER_SWSTROBE 0x08            /* mode 4, s/w triggered strobe   */
#define TIMER_HWSTROBE 0x0a            /* mode 5, h/w triggered strobe   */
#define TIMER_LATCH    0x00            /* latch counter for reading      */
#define TIMER_LSB      0x10            /* r/w counter LSB                */
#define TIMER_MSB      0x20            /* r/w counter MSB                */
#define TIMER_16BIT    0x30            /* r/w counter 16 bits, LSB first */
#define TIMER_BCD      0x01            /* count in BCD                   */
#define TIMER_RD_BACK  0xc0            /* Read Back Command              */
                /* READ BACK command layout in the Command Register      */
#define RB_NOT_COUNT    0x40           /* Don't select counter latch     */
#define RB_NOT_STATUS   0x20           /* Don't select status latch      */
#define RB_COUNT_0      0x02           /* Counter 0 latch                */
#define RB_COUNT_1      0x04           /* Counter 1 latch                */
#define RB_COUNT_2      0x08           /* Counter 2 latch                */
#define RB_OUTPUT       0x80           /* Output of the counter is 1     */

#define TIMER_TICK     1193182  /* The internal tick rate in ticks per second */

/*-------------------------------------------------------------------------+
| Define the time limits for RTEMS Test Suite test durations. Long test and
| short test duration limits are provided. These values are in seconds and
| need to be converted to ticks for the application.
+--------------------------------------------------------------------------*/
#define MAX_LONG_TEST_DURATION       300  /* 5 minutes = 300 seconds */
#define MAX_SHORT_TEST_DURATION      3    /* 3 seconds */

/*-------------------------------------------------------------------------+
| Macros
+--------------------------------------------------------------------------*/
/*-------------------------------------------------------------------------+
| Define the interrupt mechanism for Time Test 27.
| NOTE: Use a software interrupt for the i386 family.
+--------------------------------------------------------------------------*/
#define MUST_WAIT_FOR_INTERRUPT 0
#define Install_tm27_vector(handler) \
{ \
  rtems_isr_entry dummy; \
  rtems_interrupt_catch(handler, 0x90, &dummy); \
}
#define Cause_tm27_intr() asm volatile("int $0x90" : :);
#define Clear_tm27_intr()
#define Lower_tm27_intr()

/* does anyone need this? if so, report it so we can rename this macro */
#if 0
/*-------------------------------------------------------------------------+
| Simple spin delay in microsecond units for device drivers.
| This is very dependent on the clock speed of the target.
+--------------------------------------------------------------------------*/
#define rtems_bsp_delay(_microseconds) \
{ \
  rtems_unsigned32 _cnt = _microseconds; \
  asm volatile ("0: nop; mov %0,%0; loop 0b" : "=c"(_cnt) : "0"(_cnt)); \
}
#endif

/*-------------------------------------------------------------------------+
| Convert microseconds to ticks and ticks to microseconds.
+--------------------------------------------------------------------------*/
#define US_TO_TICK(us) (((us)*105+44)/88)
#define TICK_TO_US(tk) (((tk)*88+52)/105)

/*-------------------------------------------------------------------------+
| External Variables.
+--------------------------------------------------------------------------*/
#define IDT_SIZE 256
#define GDT_SIZE 3

extern interrupt_gate_descriptor Interrupt_descriptor_table[IDT_SIZE];
extern segment_descriptors Global_descriptor_table   [GDT_SIZE];
 
extern rtems_configuration_table BSP_Configuration;
                                    /* User provided BSP configuration table. */
extern rtems_unsigned32          rtemsFreeMemStart;
  /* Address of start of free memory - should be used when creating new
     partitions or regions and updated afterwards. */

/*-------------------------------------------------------------------------+
| Function Prototypes.
+--------------------------------------------------------------------------*/
void          _IBMPC_initVideo(void);    /* from 'outch.c'  */
void          _IBMPC_outch    (char);    /* from 'outch.c'  */
char          _IBMPC_inch     (void);    /* from 'inch.c'   */ 
char          _IBMPC_inch_sleep (void);  /* from 'inch.c'   */ 

void rtemsReboot(void);                  /* from 'exit.c'   */

void Wait_X_ms(unsigned int timeToWait); /* from 'timer.c'  */


/* Definitions for BSPConsolePort */
#define BSP_CONSOLE_PORT_CONSOLE (-1)
#define BSP_CONSOLE_PORT_COM1    (BSP_UART_COM1)
#define BSP_CONSOLE_PORT_COM2    (BSP_UART_COM2)

/*
 * indicate, that BSP has IDE driver
 */
#define RTEMS_BSP_HAS_IDE_DRIVER

/* GDB stub stuff */
void i386_stub_glue_init(int uart);
void i386_stub_glue_init_breakin(void);
void set_debug_traps(void);
void breakpoint(void);

#ifdef __cplusplus
}
#endif

#endif /* __BSP_H_ */
/* end of include file */