source: rtems/c/src/lib/libbsp/i386/pc386/ChangeLog @ b58c049

4.104.11
Last change on this file since b58c049 was b58c049, checked in by Joel Sherrill <joel.sherrill@…>, on Jul 21, 2009 at 3:48:34 PM

2009-07-21 Roxana Leontie <roxana.leontie@…>

  • console/fb_vga.c: replaced the ioctl structures with linux framebuffer equivalents
  • Property mode set to 100644
File size: 40.6 KB
Line 
12009-07-21      Roxana Leontie <roxana.leontie@gmail.com>
2
3        * console/fb_vga.c: replaced the ioctl structures with linux
4        framebuffer equivalents
5
62009-07-16      Joel Sherrill <joel.sherrill@oarcorp.com>
7
8        * configure.ac: Rename BSP_BOOTCARD_OPTIONS to
9        RTEMS_BSP_BOOTCARD_OPTIONS. Add RTEMS_BSP_CLEANUP_OPTIONS so all BSPs
10        have the same options.
11
122009-07-01      Sebastian Huber <sebastian.huber@embedded-brains.de>
13
14        * Makefile.am, preinstall.am: Update for generic interrupt support.
15
162009-06-17      Joel Sherrill <joel.sherrill@oarcorp.com>
17
18        * console/ps2_mouse.c: Fix inconsistent spacing.
19
202009-06-12      Chris Johns <chrisj@rtems.org> 
21
22        * ide/ide.c: Format the data output in DEBUG mode.
23
242009-05-30      Chris Johns <chrisj@rtems.org>
25
26        * ide/ide.c: Add initialisation code to reset the IDE devices and
27        to probe them and display their model numbers. Also add code to
28        display the probing to aid bring up new hardware.
29
30        * ide/idecfg.c: Add the --ide-show command to show probing type
31        accessing when finding devices on the configured IDE buses.
32
332009-05-29      Roxana Leontie <roxana.leontie@gmail.com>
34
35        * Makefile.am, preinstall.am: Install tty_drv.h
36
372009-05-08      Joel Sherrill <joel.sherrill@oarcorp.com>
38
39        * startup/bspgetworkarea.c: Switch from ssize_t to uintptr_t for
40        bsp_get_work_area() since the work area is larger than a single
41        allocatable object.
42
432009-05-06      Joel Sherrill <joel.sherrill@oarcorp.com>
44
45        * console/console.c, console/inch.c, ide/ide.c: Fixed warnings.
46
472009-04-28      Chris Johns <chrisj@rtems.org>
48
49        * Makefile.am: Add bspcmdline.c.
50        * include/bsp.h: Add boot command line interfaces.
51        * start/start.c: Save the multiboot command line. Pass the command
52        line to boot_card.
53        * start/start.S: Update for boot_card command line change.
54        * startup/bspstart.c: Initialise the command line.
55        * startup/bspcmdline.c: New.
56        * console/console.c, ide/idecfg.c: Add boot command line support.
57        * ide/ide.cfg: Add prints for errors to help resolve problems.
58
592009-02-11      Joel Sherrill <joel.sherrill@oarcorp.com>
60
61        * configure.ac, start/start16.S: Remove duplicate configure option and
62        add support for the configure time variable BSP_VIDEO_80x50.
63
642008-12-04      Joel Sherrill <joel.sherrill@oarcorp.com>
65
66        * bsp_specs: Move -e start from *link to *startfile to avoid warning
67        for undefined entry symbol when linking relocatables with binutils
68        2.19.
69
702008-12-04      Joel Sherrill <joel.sherrill@OARcorp.com>
71
72        PR 1344/bsps
73        * clock/ckinit.c: Committed code was not final. Corrections.
74
752008-12-03      Joel Sherrill <joel.sherrill@OARcorp.com>
76                Michael South <msouth@msouth.org>
77
78        PR 1344/bsps
79        * configure.ac, clock/ckinit.c, timer/timer.c: Add use of TSC for
80        nanoseconds granularity. i8254 is very slow on some systems. TSC use
81        is auto-detected by default.
82
832008-12-02      Joel Sherrill <joel.sherrill@oarcorp.com>
84
85        * startup/bspgetworkarea.c: Remove debug prints.
86
872008-10-02      Joel Sherrill <joel.sherrill@OARcorp.com>
88
89        * startup/bspgetworkarea.c: Fix botched edit.
90
912008-10-02      Joel Sherrill <joel.sherrill@oarcorp.com>
92
93        * startup/bspgetworkarea.c: Change size_t to ssize_t on
94        bsp_get_work_area(). On 16-bit architectures, size_t can be 16-bits
95        which would limit the work area to 64K.
96
972008-10-02      Joel Sherrill <joel.sherrill@OARcorp.com>
98
99        * Makefile.am: Turn = into +=.
100
1012008-10-01      Ralf Corsépius <ralf.corsepius@rtems.org>
102
103        * Makefile.am: Eliminate bsp.am. Build startup files as side-effect
104        of building libbspstart.a, using automake-rules.
105
1062008-09-30      Ralf Corsépius <ralf.corsepius@rtems.org>
107
108        * clock/ckinit.c: include "../../../shared/clockdrv_shell.h".
109        * Makefile.am: Reflect changes above.
110
1112008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
112
113        * Makefile.am: Eliminate *_SOURCES.
114
1152008-09-29      Ralf Corsépius <ralf.corsepius@rtems.org>
116
117        * Makefile.am: Move noinst_LIBRARIES = libbsp.a before its
118        components.
119
1202008-09-26      Ralf Corsépius <ralf.corsepius@rtems.org>
121
122        * Makefile.am: Cleanup ../../shared/include/bootcard.h handling.
123
1242008-09-24      Ralf Corsépius <ralf.corsepius@rtems.org>
125
126        * Makefile.am: Cosmetics.
127
1282008-09-23      Joel Sherrill <joel.sherrill@oarcorp.com>
129
130        * configure.ac: Make letting boot_card() handle work area allocation
131        mandatory. Rename RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to
132        BSP_BOOTCARD_OPTIONS.
133
1342008-09-23      Joel Sherrill <joel.sherrill@oarcorp.com>
135
136        * startup/bspclean.c: Removed.
137
1382008-09-22      Joel Sherrill <joel.sherrill@oarcorp.com>
139
140        * startup/bspreset.c: New file.
141
1422008-09-22      Joel Sherrill <joel.sherrill@oarcorp.com>
143
144        * Makefile.am, configure.ac, console/inch.c, console/keyboard.c,
145        include/bsp.h: Use standardized bsp_cleanup() which can optionally
146        print a message, poll for user to press key, and call bsp_reset().
147        Using this eliminates the various bsp_cleanup() implementations which
148        had their own implementation and variety of string constants.
149
1502008-09-18      Joel Sherrill <joel.sherrill@oarcorp.com>
151
152        * Makefile.am, configure.ac, startup/bspstart.c, startup/linkcmds: Add
153        bsp_get_work_area() implementation and use more of the BSP
154        Initialization Framework.
155        * startup/bspgetworkarea.c: New file.
156
1572008-09-18      Joel Sherrill <joel.sherrill@oarcorp.com>
158
159        * include/bsp.h: Eliminate definitions of BSP_LIBIO_MAX_FDS since this
160        is NOT used anywhere.
161
1622008-09-16      Joel Sherrill <joel.sherrill@oarcorp.com>
163
164        * startup/bspstart.c: Remove unnecessary includes of
165        rtems/libcsupport.h and rtems/libio.h.
166
1672008-09-06      Ralf Corsépius <ralf.corsepius@rtems.org>
168
169        * ide/ide.c: Convert to "bool".
170
1712008-09-05      Ralf Corsépius <ralf.corsepius@rtems.org>
172
173        * console/console.c: Remove bogus decl.
174        * timer/timer.c: Convert to "bool".
175
1762008-09-02      Ralf Corsépius <ralf.corsepius@rtems.org>
177
178        * clock/rtc.c, console/inch.c, ne2000/ne2000.c, timer/timer.c:
179        Eliminate rtems_boolean.
180
1812008-08-31      Joel Sherrill <joel.sherrill@oarcorp.com>
182
183        * timer/timer.c: Eliminate empty function from every benchmark timer
184        driver. Fix spelling.
185
1862008-08-31      Joel Sherrill <joel.sherrill@oarcorp.com>
187
188        * timer/timer.c: Rename timer driver methods to follow RTEMS
189        programming conventions.
190
1912008-08-22      Joel Sherrill <joel.sherrill@oarcorp.com>
192
193        * Makefile.am: Now named bspclean.c
194
1952008-08-21      Joel Sherrill <joel.sherrill@oarcorp.com>
196
197        * startup/bspclean.c: New file.
198        * startup/exit.c: Removed.
199
2002008-08-19      Joel Sherrill <joel.sherrill@OARcorp.com>
201
202        * console/ps2_mouse.c: Fix ps2 mouse interrupt.
203
2042008-08-19      Joel Sherrill <joel.sherrill@OARcorp.com>
205
206        * clock/ckinit.c, console/serial_mouse.c, ne2000/ne2000.c,
207        startup/bspstart.c: Fix warnings for prototypes, types, etc.
208
2092008-08-18      Ralf Corsépius <ralf.corsepius@rtems.org>
210
211        * console/mouse_parser.c, console/mouse_parser.h, console/outch.c:
212        Add missing prototypes.
213        * console/ps2_mouse.c, timer/timer.c: Add missing prototypes.
214
2152008-07-29      Chris Johns <chrisj@rtems.org>
216
217        * ide/ide.c: Updated to the rtems_* libblock changed.
218
2192008-05-23      Joel Sherrill <joel.sherrill@OARcorp.com>
220
221        * console/console.c, console/serial_mouse.c: Eliminate copies of
222        switches to convert termios Bxxx constants to xxx as an integer. Use
223        the shared termios_baud_to_number() routine to do the same
224        conversion.
225
2262008-05-15      Joel Sherrill <joel.sherrill@OARcorp.com>
227
228        * startup/bspstart.c: Add capability for bootcard.c BSP Initialization
229        Framework to ask the BSP where it has memory for the RTEMS Workspace
230        and C Program Heap. These collectively are referred to as work area.
231        If the BSP supports this, then it does not have to include code to
232        split the available memory between the two areas. This reduces the
233        amount of code in the BSP specific bspstart.c file. Additionally, the
234        shared framework can initialize the C Library, call
235        rtems_debug_enable(), and dirty the work area memory. Until most/all
236        BSPs support this new capability, if the BSP supports this, it should
237        call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
238        When the transition is complete, this autoconf macro can be removed.
239
2402008-05-12      Joel Sherrill <joel.sherrill@OARcorp.com>
241
242        * startup/bspstart.c: Refactored and renamed initialization routines to
243        rtems_initialize_data_structures, rtems_initialize_before_drivers,
244        rtems_initialize_device_drivers, and
245        rtems_initialize_start_multitasking. This opened the sequence up so
246        that bootcard() could provide a more robust and flexible framework
247        which is easier to explain and understand. This also lays the
248        groundwork for sharing the division of available memory between the
249        RTEMS workspace and heap and the C library initialization across all
250        BSPs.
251
2522008-05-06      Joel Sherrill <joel.sherrill@OARcorp.com>
253
254        * configure.ac: Remove spurious line.
255
2562008-04-23      Joel Sherrill <joel.sherrill@OARcorp.com>
257
258        * console/ps2_mouse.c, console/serial_mouse.c: Remove all references to
259        console_reserve_resources and termios_reserve_resources.
260
2612008-04-17      Joel Sherrill <joel.sherrill@oarcorp.com>
262
263        * Makefile.am: Do not use intermediate .rel files unless from libcpu or
264        a network driver. This simplifies the Makefile.am and avoids pulling
265        in unneeded code.
266
2672008-03-22      Joel Sherrill <joel.sherrill@oarcorp.com>
268
269        * configure.ac, startup/exit.c: Add BSP_PRESS_KEY_FOR_RESET
270        configuration option. When this is set to one, a clean exit of an
271        application will result in the BSP resetting the hardware without
272        waiting for a human to press a key.
273        * start/start.S, startup/linkcmds: Replace the linkcmds with a
274        version very closely based upon the default in binutils 2.18 for
275        this target.  This eliminated weird failures with C++ dtors even
276        in C applications.  We had an extra _ on a symbol used in start.S.
277
2782008-03-12      Joel Sherrill <joel.sherrill@oarcorp.com>
279
280        * configure.ac: Fix typo.
281
2822008-03-03      Joel Sherrill <joel.sherrill@OARcorp.com>
283
284        * startup/linkcmds: Add wildcard to gcc_except_table section so
285        programs compiled with gcc 4.3.x can link.
286
2872008-02-07      Joel Sherrill <joel.sherrill@oarcorp.com>
288
289        * clock/ckinit.c: Rework clock driver to use template and to provide
290        nanoseconds since last tick capability.
291
2922007-12-11      Joel Sherrill <joel.sherrill@OARcorp.com>
293
294        * clock/ckinit.c, include/bsp.h, startup/bspstart.c: Eliminate copies
295        of the Configuration Table. Use the RTEMS provided accessor macros to
296        obtain configuration fields.
297
2982007-12-04      Joel Sherrill <joel.sherrill@OARcorp.com>
299
300        * include/bsp.h, startup/bspstart.c: Move interrupt_stack_size field
301        from CPU Table to Configuration Table. Eliminate CPU Table from all
302        ports. Delete references to CPU Table in all forms.
303
3042007-12-03      Joel Sherrill <joel.sherrill@OARcorp.com>
305
306        * Makefile.am, startup/bspstart.c: Moved most of the remaining CPU
307        Table fields to the Configuration Table. This included
308        pretasking_hook, predriver_hook, postdriver_hook, idle_task,
309        do_zero_of_workspace, extra_mpci_receive_server_stack,
310        stack_allocate_hook, and stack_free_hook. As a side-effect of this
311        effort some multiprocessing code was made conditional and some style
312        clean up occurred.
313
3142007-11-26      Joel Sherrill <joel.sherrill@oarcorp.com>
315
316        * startup/bspstart.c: Eliminate the interrupt_table_segment and
317        interrupt_table_offset fields in the i386 CPU Table since they are
318        never read.
319
3202007-09-12      Joel Sherrill <joel.sherrill@OARcorp.com>
321
322        PR 1257/bsps
323        * console/inch.c, console/keyboard.c, console/pc_keyb.c, console/vt.c:
324        Code outside of cpukit should use the public API for
325        rtems_interrupt_disable/rtems_interrupt_enable. By bypassing the
326        public API and directly accessing _CPU_ISR_Disable and
327        _CPU_ISR_Enable, they were bypassing the compiler memory barrier
328        directive which could lead to problems. This patch also changes the
329        type of the variable passed into these routines and addresses minor
330        style issues.
331
3322007-09-10      Joel Sherrill <joel.sherrill@OARcorp.com>
333
334        * console/vt.c: Changed tabs to spaces.
335
3362007-09-10      Joel Sherrill <joel.sherrill@OARcorp.com>
337
338        * console/keyboard.c: Replaced tabs with spaces.
339
3402007-09-07      Joel Sherrill <joel.sherrill@oarcorp.com>
341
342        * startup/bspstart.c: If we cannot find enough memory to run the
343        program, generate a fatal error and print a message.
344
3452007-06-20      Joel Sherrill <joel.sherrill@OARcorp.com>
346
347        * ne2000/ne2000.c: Fix spelling error.
348
3492007-05-28      Joel Sherrill <joel.sherrill@OARcorp.com>
350
351        * startup/bspstart.c: Eliminate maximum_drivers configuration parameter
352        since it was used to configure a no longer used feature. Device names
353        are now part of the filesystem not in a table.
354
3552007-05-28      Joel Sherrill <joel.sherrill@OARcorp.com>
356
357        PR 1244/bsps
358        * console/console.c: Remove definition of __assert.
359
3602007-04-12      Ralf Corsépius <ralf.corsepius@rtems.org>
361
362        * bsp_specs: Remove qrtems_debug.
363
3642007-04-02      Joel Sherrill <joel@OARcorp.com>
365
366        * clock/ckinit.c: Eliminate TOD_Ticks_per_second variable.
367
3682007-03-31      Ralf Corsépius <ralf.corsepius@rtems.org>
369
370        * ne2000/ne2000.c (ne_interrupt_handler): Avoid warning.
371
3722007-03-30      Ralf Corsépius <ralf.corsepius@rtems.org>
373
374        * ne2000/ne2000.c: Remove typecast.
375
3762007-03-11      Joel Sherrill <joel@OARcorp.com>
377
378        * startup/bspstart.c: Remove assignments of
379        Cpu_table.do_zero_of_workspace to TRUE since TRUE is the default
380        value in boot_card.c
381
3822007-01-29      Ralf Corsépius <ralf.corsepius@rtems.org>
383
384        * console/fb_vga.c: Eliminate __u16, __u32.
385
3862006-12-15      Ralf Corsépius <ralf.corsepius@rtems.org>
387
388        * 3c509/3c509.c, ne2000/ne2000.c, wd8003/wd8003.c: Use
389        ioctl_command_t as arg in ioctl-functions.
390
3912006-12-13      Alexey Shamrin <shamrin@gmail.com>
392
393        PR 1189/bsps
394        * console/outch.c: If you print a character with the code larger than
395        127 (extended ASCII) to the VGA console, then it blinks. The reason:
396        char == signed char, so such characters get represented by negative
397        numbers. The sign bit then goes to attribute byte, resulting in the
398        blinking.
399
4002006-12-02      Ralf Corsépius <ralf.corsepius@rtems.org>
401
402        * configure.ac: New BUG-REPORT address.
403
4042006-11-15      Joel Sherrill <joel@OARcorp.com>
405
406        * Makefile.am: Merge c_rtems_main() into boot_card(). This eliminated a
407        file and simplified initialization.
408
4092006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
410
411        * Makefile.am: Remove superfluous -DASM.
412
4132006-10-17      Ralf Corsépius <ralf.corsepius@rtems.org>
414
415        * configure.ac: Require autoconf-2.60. Require automake-1.10.
416
4172006-09-11      Joel Sherrill <joel@OARcorp.com>
418
419        * console/fb_vga.c, console/kd.h: Convert C++ style comments to C
420        style.
421
4222006-09-04      Till Straumann <strauman@slac.stanford.edu>
423
424        * startup/bspstart.c, start/start.S: Since the crude
425        memory autodetection code can easily fail (boards with
426        'reserved' regions - I experienced a hard lockup on a
427        dell precision 490 when writing past the bios-reported
428        memory size) I added code that a) tries to save
429        and use multiboot info, if present b) allows applications
430        to override/set memory size via a weak alias.
431
4322006-09-04      Till Straumann <strauman@slac.stanford.edu>
433
434        * startup/linkcmds: added *(.text.*) *(.data.*) *(.bss.*)
435
4362006-02-01      Joel Sherrill <joel@OARcorp.com>
437
438        * configure.ac, console/console.c: Add USE_COM1_AS_CONSOLE BSP option.
439        This makes it easy to build the pc386 BSP in a configuration that
440        corresponds to qemu with COM1 redirected to stdio.
441
4422006-01-11      Ralf Corsepius <ralf.corsepius@rtems.org>
443
444        * configure.ac: Remove explicit ampolish3 support (now in
445        RTEMS_BSP_CONFIGURE).
446
4472006-01-10      Ralf Corsepius <ralf.corsepius@rtems.org>
448
449        * configure.ac: Add ampolish3 support.
450        * Makefile.am: Add preinstall.am.
451
4522005-11-06      Ralf Corsepius <ralf.corsepius@rtems.org>
453
454        * timer/timer.c: Remove C++-style comments.
455
4562005-11-02      Till Straumann <strauman@slac.stanford.edu>
457
458        PR 832/bsps
459        * startup/ldsegs.S: put IDT and GDT into data segment.
460        The CPU modifies the 'accessed' bit and GDB's (rtems-gdb-stub)
461        text segment checksum comparison failed...
462
4632005-10-17      Ralf Corsepius <ralf.corsepius@rtems.org>
464
465        * console/fb_vga.h, console/kd.h, console/ps2_drv.h,
466        console/serial_mouse.c, console/serial_mouse.h: Remove CVS Log.
467
4682005-10-17      Ralf Corsepius <ralf.corsepius@rtems.org>
469
470        * Makefile.am: Install/preinstall headers from ../../i386/shared.
471
4722005-09-29      Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
473
474        PR 649/filesystem
475        * ide/idecfg.c: added configuration items for primary/secondary
476        IDE interface
477        * configure.ac: added configuration items for primary/secondary
478        IDE interface
479       
4802005-09-19      Ralf Corsepius <ralf.corsepius@rtems.org>
481
482        * 3c509/3c509.c: Remove [$]Log.
483        Include <errno.h> instead of <sys/errno.h>.
484
4852005-08-23  Karel Gardas  <kgardas@objectsecurity.com>>
486
487        * timer/timer.c: Enhance to use either interupt-based timer
488        functions on older CPUs or to use TSC-based timer functions on
489        more recent (Pentium and above) CPUs. The decision is made in
490        Timer_initialize function when it is called for the first time
491        based on a result obtained from cpuid instruction during the BSP
492        initialization phase. During the first call, there are also late
493        bindings to the implementation functions initialized to
494        appropriate values.
495
4962005-08-18  Karel Gardas  <kgardas@objectsecurity.com>
497
498        * startup/bspstart.c: Initialize PCI bus in bsp_start function.
499
5002005-07-18      Lars Munch <lars@segv.dk>
501
502        PR 813/networking
503        * ne2000/ne2000.c: The ne2000 driver on pc386 has been broken since a
504        parameter was added to irq handlers (2005-04-18). Before these
505        changes the argument to the interrupt handler was the interrupt
506        number, now the argument is handle, but the ne2000 driver needs the
507        interrupt number. The fix is to set the handle to the interrupt
508        number.
509
5102005-07-06      Ralf Corsepius <ralf.corsepius@rtems.org>
511
512        * console/keyboard.c: Apply CHAR_BIT to compute BITS_PER_LONG.
513
5142005-05-26      Ralf Corsepius <ralf.corsepius@rtems.org>
515
516        * include/bsp.h: New header guard.
517
5182005-05-06      Jennifer Averett <jennifer.averett@oarcorp.com>
519
520        * 3c509/3c509.c, clock/ckinit.c, console/console.c, console/fb_vga.c,
521        console/inch.c, console/ps2_mouse.c, console/serial_mouse.c,
522        ne2000/ne2000.c, timer/timer.c, wd8003/wd8003.c: Moved irq.h to bsp
523        subdirectory.
524
5252005-05-03      Jennifer Averett <jennifer.averett@oarcorp.com>
526
527        * 3c509/3c509.c, ne2000/ne2000.c: Modified parameters to
528        remove warnings.
529        * console/console.c, wd8003/wd8003.c: Added support for
530        addition of parameter in ISRs.
531       
5322005-04-26      Joel Sherrill <joel@OARcorp.com>
533
534        * 3c509/3c509.c, wd8003/wd8003.c: Eliminate warnings.
535
5362005-04-18      Eric Valette <eric.valette@free.fr>
537
538        * clock/ckinit.c, console/console.c, console/ps2_mouse.c,
539        console/serial_mouse.c, timer/timer.c: Added parameter to irq handler
540
5412005-02-18      Joel Sherrill <joel@OARcorp.com>
542
543        * console/keyboard.h: Add include file and cleanup file header.
544
5452005-01-22      Ralf Corsepius <ralf.corsepius@rtems.org>
546
547        * clock/todcfg.c: size_t RTC_Count.
548
5492005-01-18      Ralf Corsepius <ralf.corsepius@rtems.org>
550
551        * console/vgainit.c: static graphic_on|off.
552
5532005-01-07      Ralf Corsepius <ralf.corsepius@rtems.org>
554
555        * Makefile.am: Eliminate CFLAGS_OPTIMIZE_V.
556
5572005-01-04      Joel Sherrill <joel@OARcorp.com>
558
559        * console/keyboard.c, console/ps2_mouse.c, console/vt.c: Remove
560        warnings.
561
5622005-01-02      Ralf Corsepius <ralf.corsepius@rtems.org>
563
564        * Makefile.am: Remove build-variant support.
565
5662004-11-20      Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
567
568        PR 703/filesystem
569        * ide/ide.c: Extend the "modes_available" and "mode_active" parameters
570        to uint16_t for UDMA support.
571
5722004-10-13      Eric Norum <norume@aps.anl.gov>
573
574        PR 688/bsps
575        * Makefile.am clock/todcfg.c: Add support for MC146818A TOD chip.
576
5772004-09-24      Ralf Corsepius <ralf.corsepius@rtems.org>
578
579        * configure.ac: Require automake > 1.9.
580
5812004-07-25      Joel Sherrill <joel@OARcorp.com>
582
583        * 3c509/3c509.c: Add <sys/errno.h>.
584        * startup/linkcmds: Add .jcr section.
585
5862004-05-21  Till Strauman <strauman@slac.stanford.edu>
587
588        * PR 624/bsps
589        startup/bspstart.c: When probing the memory, make sure not to
590        corrupt the application. Only probe addresses beyond rtemsFreeMemStart.
591        * Let IBMPC_outch() convert LF -> CRLF to avoid printk scrambling
592        the screen.
593
5942004-05-21      Joel Sherrill <joel@OARcorp.com>
595
596        * ne2000/ne2000.c, wd8003/wd8003.c: Include errno.h as a consequence of
597        recent updates to BSD header files.
598
5992004-04-23      Ralf Corsepius <ralf.corsepius@rtems.org>
600
601        PR 610/bsps
602        * Makefile.am: Add include/tm27.h, Cosmetics.
603        * include/tm27.h: Final cosmetics.
604
6052004-04-22      Ralf Corsepius <ralf.corsepius@rtems.org>
606
607        * include/bsp.h: Split out tmtest27 support.
608        * include/tm27.h: New.
609
6102004-04-21      Ralf Corsepius <ralf.corsepius@rtems.org>
611
612        PR 613/bsps
613        * include/bsp.h: Remove MAX_LONG_TEST_DURATION.
614
6152004-04-21      Ralf Corsepius <ralf.corsepius@rtems.org>
616
617        PR 614/bsps
618        * include/bsp.h: Remove MAX_SHORT_TEST_DURATION (Unused).
619
6202004-04-14      Ralf Corsepius <ralf.corsepius@rtems.org>
621
622        * configure.ac: Add RTEMS_ROOT (HACK: This is the last file c/src
623        which still uses RTEMS_ROOT).
624
6252004-04-02      Ralf Corsepius <ralf.corsepius@rtems.org>
626
627        * start/start.S: Include <rtems/asm.h> instead of <asm.h>.
628        * timer/timerisr.S: Include <rtems/asm.h> instead of <asm.h>.
629
6302004-04-01      Ralf Corsepius <ralf.corsepius@rtems.org>
631
632        * startup/ldsegs.S: Include <rtems/asm.h> instead of <asm.h>.
633        * include/bsp.h: Include <rtems/clockdrv.h> instead of <clockdrv.h>.
634        * include/bsp.h: Include <rtems/console.h> instead of <console.h>.
635        * include/bsp.h: Include <rtems/iosupp.h> instead of <iosupp.h>.
636
6372004-03-31      Ralf Corsepius <ralf.corsepius@rtems.org>
638
639        * clock/ckinit.c, clock/rtc.c, console/inch.c, ide/ide.c,
640        include/bsp.h, startup/bspstart.c, timer/timer.c: Convert to using
641        c99 fixed size types.
642
6432004-02-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
644
645        * Makefile.am: Don't install *.rels. Reflect changes to bsp.am.
646        Preinstall dist_project_lib*.
647
6482004-02-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
649
650        * configure.ac: Explicitly check for OBJCOPY.
651
6522004-02-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
653
654        * Makefile.am: Reflect changes to bsp.am.
655
6562004-02-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
657
658        * Makefile.am: Reflect changes to bsp.am.
659
6602004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
661
662        * Makefile.am: Use CPPASCOMPILE instead of CCASCOMPILE.
663
6642004-02-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
665
666        * Makefile.am: Add start*.bin to CLEANFILES.
667
6682004-02-06      Joel Sherrill <joel@OARcorp.com>
669
670        * Makefile.am: Split startup into multiple .rels without reorganizing
671        the source.
672
6732004-02-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
674
675        * Makefile.am: Add missing $ in reference to 3c509.rel.
676
6772004-02-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
678
679        * Makefile.am: Merge-in 3c509/Makefile.am, clock/Makefile.am,
680        console/Makefile.am, ide/Makefile.am, ne2000/Makefile.am,
681        startup/Makefile.am, timer/Makefile.am, wd8003/Makefile.am,
682        wrapup/Makefile.am. Use automake compilation rules.
683        * 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
684        ide/Makefile.am, ne2000/Makefile.am, startup/Makefile.am,
685        timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Remove.
686        * configure.ac: Reflect changes above.
687        * start/start.S: Change comment to make it gcc -ansi compliant.
688
6892004-01-28      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
690
691        * configure.ac: Add nostdinc to AUTOMAKE_OPTIONS.
692        Add RTEMS_PROG_CCAS.
693
6942004-01-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
695
696        * Makefile.am: Add PREINSTALL_DIRS.
697        * console/Makefile.am: Add PREINSTALL_DIRS.
698        * wrapup/Makefile.am: Reflect changes to libcpu.
699
7002004-01-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
701
702        * Makefile.am: Re-add dirstamps to PRE/TMPINSTALL_FILES.
703        Add PRE/TMPINSTALL_FILES to CLEANFILES.
704        * console/Makefile.am: Ditto.
705        * startup/Makefile.am: Ditto.
706
7072004-01-07      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
708
709        * start/Makefile.am: Remove.
710        * Makefile.am: Merge-in start/Makefile.am.
711        * configure.ac: Reflect changes above.
712
7132004-01-05      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
714
715        * wrapup/Makefile.am: Eliminate $(LIB).
716        Use noinst_DATA to trigger building libbsp.a.
717
7182003-12-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
719
720        * start/Makefile.am: Build $(ARCH)/start16$(LIB_VARIANT).bin.
721
7222003-12-13      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
723
724        * start/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
725        * startup/Makefile.am: s,${PROJECT_RELEASE}/lib,$(PROJECT_LIB),g.
726
7272003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
728
729        * console/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
730        * start/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
731        * startup/Makefile.am: Use mkdir_p. Remove dirs from PRE/TMPINSTALL_FILES.
732
7332003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
734
735        * configure.ac: Require automake >= 1.8, autoconf >= 2.59.
736
7372003-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
738
739        * wrapup/Makefile.am: Cosmetics.
740
7412003-12-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
742
743        * Makefile.am: Misc cleanups and fixes.
744        * start/Makefile.am: Misc cleanups and fixes.
745        * startup/Makefile.am: Misc cleanups and fixes.
746        * wrapup/Makefile.am: Misc cleanups and fixes.
747
7482003-12-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
749
750        * ide/Makefile.am: PGM = ide.rel.
751
7522003-12-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
753
754        * Makefile.am: Add preinstallation dirstamp support.
755        * 3c509/Makefile.am: Cosmetics.
756        * clock/Makefile.am: Cosmetics.
757        * console/Makefile.am: Add preinstallation dirstamp support.
758        * ide/Makefile.am: Cosmetics.
759        * ne2000/Makefile.am: Cosmetics.
760        * start/Makefile.am: Add compilation dirstamp support.
761        * startup/Makefile.am: Cosmetics.
762        * timer/Makefile.am: Cosmetics.
763        * wd8003/Makefile.am: Cosmetics.
764        * wrapup/Makefile.am: Cosmetics.
765
7662003-12-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
767
768        * 3c509/Makefile.am: Remove all-local: $(ARCH).
769        * clock/Makefile.am: Remove all-local: $(ARCH).
770        * console/Makefile.am: Remove all-local: $(ARCH).
771        * ide/Makefile.am: Remove all-local: $(ARCH).
772        * ne2000/Makefile.am: Remove all-local: $(ARCH).
773        * start/Makefile.am: Remove all-local: $(ARCH).
774        * startup/Makefile.am: Remove all-local: $(ARCH).
775        * timer/Makefile.am: Remove all-local: $(ARCH).
776        * wd8003/Makefile.am: Remove all-local: $(ARCH).
777        * wrapup/Makefile.am: Remove all-local: $(ARCH).
778
7792003-10-02      Till Strauman <strauman@slac.stanford.edu>
780
781        PR 502/bsps
782        * console/outch.c: Add support for a few ANSI escape sequences to make
783        libetcl happy.
784
7852003-09-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
786
787        * Makefile.am: Merge-in include/Makefile.am.
788        Reflect changes to bsp.am.
789        * include/Makefile.am: Remove.
790        * configure.ac: Reflect changes above.
791
7922003-09-08      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
793
794        * bsp_specs: Remove *lib:.
795
7962003-09-04      Joel Sherrill <joel@OARcorp.com>
797
798        * clock/ckinit.c, clock/rtc.c, console/console.c, console/inch.c,
799        console/outch.c, ide/ide.c, include/bsp.h, include/crt.h,
800        ne2000/ne2000.c, start/start.S, startup/bspstart.c, startup/exit.c,
801        startup/ldsegs.S, startup/linkcmds, timer/timer.c, timer/timerisr.S:
802        URL for license changed.
803
8042003-08-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
805
806        PR 461/bsps
807        * start/Makefile.am: Correct generation of startup16.bin.
808
8092003-08-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
810
811        * ide/Makefile.am: Don't include @RTEMS_BPS@.cfg.
812
8132003-08-18      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
814
815        * Makefile.am: Reflect having moved aclocal/.
816
8172003-08-16      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
818
819        * Makefile.am: Reflect having moved automake/.
820        * 3c509/Makefile.am: Reflect having moved automake/.
821        * clock/Makefile.am: Reflect having moved automake/.
822        * console/Makefile.am: Reflect having moved automake/.
823        * ide/Makefile.am: Reflect having moved automake/.
824        * include/Makefile.am: Reflect having moved automake/.
825        * ne2000/Makefile.am: Reflect having moved automake/.
826        * start/Makefile.am: Reflect having moved automake/.
827        * startup/Makefile.am: Reflect having moved automake/.
828        * timer/Makefile.am: Reflect having moved automake/.
829        * wd8003/Makefile.am: Reflect having moved automake/.
830        * wrapup/Makefile.am: Reflect having moved automake/.
831
8322003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
833
834        PR 452/bsps
835        * startup/Makefile.am: Remove USE_INIT_FINI.
836
8372003-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
838
839        * configure.ac: Use rtems-bugs@rtems.com as bug report email address.
840
8412003-08-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
842
843        PR 445/bsps
844        * bsp_specs: Remove -D__embedded__ -Asystem(embedded) from cpp.
845        Remove cpp, old_cpp (now unused).
846
8472003-07-08      Joel Sherrill <joel@OARcorp.com>
848
849        * console/console.c: Correct typo.
850
8512003-05-08      Chris Johns  <cjohns@cybertec.com.au>
852
853        * HOWTO:
854        Updated the GRUB version info and how to build GRUB from source.
855        Added how to boot over the network with a PXE Netboot BIOS.
856
8572003-04-14      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
858
859        * ide/.cvsignore: New.
860
8612003-03-25      Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
862
863        PR 368/filesystems
864        * startup/ldsegs.S: Increase alignment.
865        * Makefile.am, configure.ac, include/bsp.h, wrapup/Makefile.am:
866        Added IDE supporting infrastructure.
867        * ide/Makefile.am, ide/ide.c, ide/idecfg.c: New files.  Added
868        BSP support for libchip standard ide driver.
869
8702003-03-06      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
871
872        * configure.ac: Remove AC_CONFIG_AUX_DIR.
873
8742003-02-20      Till Straumann <strauman@slac.stanford.edu>
875
876        PR 353/bsps
877        * include/bsp.h: Let the application override the network driver
878        and attach routine.
879
8802003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
881
882        * configure.ac: AM_INIT_AUTOMAKE([1.7.2]).
883
8842003-02-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
885
886        * configure.ac: AC_PREREQ(2.57).
887
8882003-01-20      Joel Sherrill <joel@OARcorp.com>
889
890        * startup/linkcmds: Add FreeBSD SYSCTL() sections for networking.
891
8922003-01-15      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
893
894        * 3c509/Makefile.am: Don't include @RTEMS_BSP@.cfg.
895        * clock/Makefile.am: Don't include @RTEMS_BSP@.cfg.
896        * console/Makefile.am: Don't include @RTEMS_BSP@.cfg.
897        * ne2000/Makefile.am: Don't include @RTEMS_BSP@.cfg.
898        * startup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
899        * timer/Makefile.am: Don't include @RTEMS_BSP@.cfg.
900        * wd8003/Makefile.am: Don't include @RTEMS_BSP@.cfg.
901
9022002-12-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
903
904        * start/Makefile.am: Use install-data-local to install startfile.
905
9062002-12-10      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
907
908        * wrapup/Makefile.am: Don't include @RTEMS_BSP@.cfg.
909
9102002-11-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
911
912        * configure.ac: Remove RTEMS_OUTPUT_BUILD_SUBDIRS.
913
9142002-10-21      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
915
916        * .cvsignore: Reformat.
917        Add autom4te*cache.
918        Remove autom4te.cache.
919
9202002-09-13     Eric Norum <eric.norum@usask.ca>
921
922        * start/start16.S: Remove unwanted + at beginning of relative
923        numeric label.
924
9252002-09-08      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
926
927        * configure.ac: Remove duplicate timer/Makefile in AC_CONFIG_FILES.
928
9292002-08-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
930
931        * console/Makefile.am: Add $(PROJECT_INCLUDE)/rtems to
932        PREINSTALL_FILES.
933        * console/mouse_parser.c: Include <string.h> (for strcmp).
934        * console/vt.c: Include <string.h> (for memcpy).
935        * wd8003/wd8003.c: Include <string.h> (for memcpy, memset).
936
9372002-08-21      Joel Sherrill <joel@OARcorp.com>
938
939        * bsp_specs: Added support for -nostdlibs.
940
9412002-08-14      Joel Sherrill <joel@OARcorp.com>
942
943        * start/start16.S: Per PR259, added code to test for video present
944        before touching the adapter.  Eric Norum <eric.norum@usask.ca>
945        tested this patch.
946
9472002-08-12      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
948
949        * console/ps2_mouse.c: Include <string.h> (for abort/exit).
950
9512002-08-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
952
953        * 3c509/Makefile.am: Use .$(OBJEXT) instead of .o.
954        * clock/Makefile.am: Use .$(OBJEXT) instead of .o.
955        * console/Makefile.am: Use .$(OBJEXT) instead of .o.
956        * ne2000/Makefile.am: Use .$(OBJEXT) instead of .o.
957        * start/Makefile.am: Use .$(OBJEXT) instead of .o.
958        * startup/Makefile.am: Use .$(OBJEXT) instead of .o.
959        * timer/Makefile.am: Use .$(OBJEXT) instead of .o.
960        * wd8003/Makefile.am: Use .$(OBJEXT) instead of .o.
961        * wrapup/Makefile.am: Use .$(OBJEXT) instead of .o.
962
9632002-07-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
964
965        * startup/ldsegs.S: #include <asm.h>.
966        * include/bsp.h: Remove _IBMPC_chrdy (is not a public function).
967        Remove printk (Now in bspIo.h).
968
9692002-07-20      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
970
971        * start/Makefile.am: Eliminate PGM.
972        Add bsplib_DATA = $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o.
973        Add bsplib_DATA += $(PROJECT_RELEASE)/lib/start16$(LIB_VARIANT).bin.
974
9752002-07-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
976
977        * startup/Makefile.am: Add bsplib_DATA = linkcmds.
978
9792002-07-16      Eric Norum <eric.norum@usask.ca>
980
981        * console/console.c: Others on the rtems-users list have expressed
982        concern about this run-time selection, so I've enclosed the changes
983        in a #ifdef RTEMS_RUNTIME_CONSOLE_SELECT conditional.
984
9852002-07-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
986
987        * wrapup/Makefile.am: Eliminate TMPINSTALL_FILES.
988        Remove $(OBJS) from all-local.
989
9902002-06-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
991
992        * wrapup/Makefile.am: Remove preinstallation of libbsp.a,
993
9942001-05-09      Joel Sherrill <joel@OARcorp.com>
995
996        * startup/linkcmds: In support of gcc 3.1, added one of more
997        of the sections .jcr, .rodata*, .data.*, .gnu.linkonce.s2.*,
998        .gnu.linkonce.sb2.*, and .gnu.linkonce.s.*.  Spacing corrections
999        and direction of segments to memory regions may also have been
1000        addressed.  This was a sweep across all BSPs.
1001 
10022002-03-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1003
1004        * configure.ac:
1005        AC_INIT(package,_RTEMS_VERSION,_RTEMS_BUGS).
1006        AM_INIT_AUTOMAKE([no-define foreign 1.6]).
1007        * 3c509/Makefile.am: Remove AUTOMAKE_OPTIONS.
1008        * Makefile.am: Remove AUTOMAKE_OPTIONS.
1009        * clock/Makefile.am: Remove AUTOMAKE_OPTIONS.
1010        * console/Makefile.am: Remove AUTOMAKE_OPTIONS.
1011        * include/Makefile.am: Remove AUTOMAKE_OPTIONS.
1012        * ne2000/Makefile.am: Remove AUTOMAKE_OPTIONS.
1013        * start/Makefile.am: Remove AUTOMAKE_OPTIONS.
1014        * startup/Makefile.am: Remove AUTOMAKE_OPTIONS.
1015        * timer/Makefile.am: Remove AUTOMAKE_OPTIONS.
1016        * wd8003/Makefile.am: Remove AUTOMAKE_OPTIONS.
1017        * wrapup/Makefile.am: Remove AUTOMAKE_OPTIONS.
1018
10192002-03-16      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1020
1021        * PR139
1022        * configure.ac: Remove stray ';', breaks building with automake-1.6.
1023
10242002-01-03      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1025
1026        * include/bsp.h: Include rtems/bspIo.h instead of bspIo.h.
1027
10282001-12-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1029
1030        * bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
1031        replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
1032
10332001-11-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1034
1035        * configure.ac: Introduce RTEMS_BSP_CONFIGURE.
1036
10372001-10-12      Joel Sherrill <joel@OARcorp.com>
1038
1039        * console/inch.c: Fixed typo.
1040
10412001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1042
1043        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
1044        * configure.in: Remove.
1045        * configure.ac: New file, generated from configure.in by autoupdate.
1046
10472001-09-27      Joel Sherrill <joel@OARcorp.com>
1048
1049        * include/bsp.h: Renamed delay() to rtems_bsp_delay().
1050
10512001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1052
1053        * include/Makefile.am: Use 'CLEANFILES ='.
1054        * include/Makefile.am: Use 'PREINSTALL_FILES ='.
1055        * console/Makefile.am: Use 'PREINSTALL_FILES ='.
1056        * Makefile.am: Use 'TMPINSTALL_FILES ='.
1057
10582001-06-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1059
1060        * console/Makefile.am: Remove RTEMS_H_FILES.
1061        * start/start16.S: include <bspopts.h> to get NEW_GAS.
1062
10632001-06-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1064
1065        * configure.in: Add bspopts.h.
1066        * include/.cvsignore: Add bspopts.h*, stamp-h*.
1067        * include/Makefile.am: Use *_HEADERS instead of *H_FILES.
1068        * 3c509/Makefile.am: Dito.
1069        * console/Makefile.am: Dito.
1070        * include/bsp.h: Include bspopts.h.
1071
10722001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
1073
1074        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
1075
10762001-04-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1077
1078        * ne2000/ne2000.c: Remove #define __INSIDE_RTEMS_BSD_TCPIP_STACK__.
1079
10802001-01-05      Joel Sherrill <joel@OARcorp.com>
1081
1082        * console/vt.c: Added include of <rtems.h> so _CPU_ISR_disable
1083        would be visible.
1084
10852000-12-05       Eric Valette <valette@crf.canon.fr>
1086
1087        * console/inch.c, console/keyboard.c, console/pc_keyb.c,
1088        console/vt.c, include/bsp.h: Correct incorrect interrupt level
1089        handling in new keyboard management code.  Correct
1090        BSP_poll_char initialization routine.
1091        * start/start.S, startup/bspstart.c: Correct when the video is
1092        initialized.
1093        * timer/timer.c (Calibrate_1ms_loop): Address problem where this
1094        did not work correctly on all PC speeds. The new calibrate routine
1095        has been tested on Pentium 166, pentium II 200, pentium III
1096        300 Mhz and does work as expected.
1097
10982000-12-05      Joel Sherrill <joel@OARcorp.com>
1099
1100        * pc386/console/console.c, pc386/console/serial_mouse.c,
1101        pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.
1102
11032000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1104
1105        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
1106
11072000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1108
1109        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
1110
11112000-11-01      Joel Sherrill <joel@OARcorp.com>
1112
1113        * startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
1114        and libcsupport.h moved from libc to lib/include/rtems and
1115        now must be referenced as <rtems/XXX.h>.   Header file order
1116        was cleaned up while doing this.
1117
11182000-10-29      Joel Sherrill <joel@OARcorp.com>
1119
1120        * startup/sbrk.c: Removed.  Redundant with shared version.
1121
11222000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1123
1124        * configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
1125        Switch to GNU canonicalization.
1126
11272000-10-23      Joel Sherrill <joel@OARcorp.com>
1128
1129        * console/serial_mouse.c: Fixed typos introduced by removal of CR/LF.
1130
11312000-10-20      Rosimildo da Silva <rdasilva@connecttel.com>
1132
1133        * console/serial_mouse.c: Added support for changing serial parameters.
1134
11352000-10-20      Joel Sherrill <joel@OARcorp.com>
1136
1137        * include/wd80x3.h: Added file header and logic to prevent multiple
1138        inclusions of this file.
1139        * wd8003/wd8003.c: Corrected attach to include "int attach" parameter.
1140
11412000-10-20      Joel Sherrill <joel@OARcorp.com>
1142
1143        * include/bsp.h: Cleaned up network driver name and attach defines.
1144
11452000-10-20      Dmitry Kargapolov <dk@gentex.ru>
1146
1147        * ne2000/ne2000.c: Fix some errors in the driver. 
1148        1. There was no sufficient check of data in ethernet header.
1149        The code in ne_rx_daemon() was:
1150            inport_word (dport, len);
1151            ...
1152            len -= 4;
1153              ...
1154            if (len > 0)
1155              ne_read_data (sc, startaddr, len, p);
1156        Unfortunately, sometimes my NIC gave me too big len value,
1157        the result was memory override.  To fix this, I added ethernet
1158        header data checking.
1159
1160        2. The way overrides were serviced was not good.  It was complex
1161        but sometimes did not provide reliable continuing of NIC working.
1162        I had the situation of an endless loop in ne_check_status()
1163        after override processing.
1164
1165        3. There was conceptual error of porting.  The old method of
1166        overrides curing was ported from the OS-s, where override-processing
1167        did start immediately.  But RTEMS-version uses events, and cleaning
1168        of the overrides can start later.
1169
1170        I selected the way of ne2000 programming that is used
1171        in freebsd kernel (v4.0).
1172
1173        Because of both problems, incorrect data in header of raw packet
1174        and receiver override, it went through ne_reset() and fully
1175        reset the ne2000.
1176
1177        So, in summary
1178        - added detecting of the incorrect data in ethernet header;
1179        - replaced handling of receiver overrides with new scheme,
1180        via resetting of NIC, this method is used also in case of
1181        invalid header detecting.
1182
11832000-10-18       Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
1184
1185        * console/console.c, console/serial_mouse.c, include/bsp.h:
1186        Add the ability to set parity, number of data bits and
1187        number of stop bits to the existing i386 serial drivers.
1188
11892000-10-17      Joel Sherrill <joel@OARcorp.com>
1190
1191        * startup/Makefile.am: Added idt.c since it has been moved libcpu/i386
1192        to libbsp/i386/shared/irq.
1193
11942000-09-29      Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
1195
1196        * startup/linkcmds: Added lines so DWARF debug information
1197        would be available.  Otherwise gdb complains that the offsets
1198        for the debug info are incorrect and doesn't load the files.
1199
12002000-09-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1201
1202        * start/Makefile.am: Remove AM_CPPFLAGS and GAS_CODE16 conditional.
1203
12042000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
1205
1206        * 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
1207        ne2000/Makefile.am, start/Makefile.am, startup/Makefile.am,
1208        timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Include
1209        compile.am
1210
12112000-08-30      Joel Sherrill <joel@OARcorp.com>
1212
1213        * console/keyboard.h: Changed numerous routines from extern inline
1214        to static inline.
1215
12162000-08-26  Rosimildo da Silva  <rdasilva@connecttel.com>
1217
1218        * Major rework of the "/dev/console" driver.
1219        * Added termios support for stdin ( keyboard ).
1220        * Added ioctls() to support modes similar to Linux( XLATE,
1221        RAW, MEDIUMRAW ).
1222        * Added Keyboard mapping and handling of the keyboard's leds.
1223        * Added Micro FrameBuffer driver ( "/dev/fb0" ) for bare VGA
1224        controller ( 16 colors ).
1225        * Added PS/2 and Serial mouse support for PC386 BSP.
1226        * console/defkeymap.c: New file.
1227        * console/fb_vga.c: New file.
1228        * console/fb_vga.h: New file.
1229        * console/i386kbd.h: New file.
1230        * console/kd.h: New file.
1231        * console/keyboard.c: New file.
1232        * console/keyboard.h: New file.
1233        * console/mouse_parser.c: New file.
1234        * console/mouse_parser.h: New file.
1235        * console/pc_keyb.c: New file.
1236        * console/ps2_drv.h: New file.
1237        * console/ps2_mouse.c: New file.
1238        * console/ps2_mouse.h: New file.
1239        * console/serial_mouse.c: New file.
1240        * console/serial_mouse.h: New file.
1241        * console/vgainit.c: New file.
1242        * console/vt.c: New file.
1243        * console/Makefile.am: Reflect new files.
1244        * console/console.c, console/inch.c, console/outch.c: Console
1245        functionality modifications.
1246        * startup/Makefile.am: Pick up tty_drv.c and gdb_glue.c
1247
12482000-08-10      Joel Sherrill <joel@OARcorp.com>
1249
1250        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.