source: rtems/c/src/lib/libbsp/i386/pc386/ChangeLog @ 8fec915

4.104.114.84.95
Last change on this file since 8fec915 was 8fec915, checked in by Joel Sherrill <joel.sherrill@…>, on 01/04/02 at 17:32:07

2001-12-22 Ralf Corsepius <corsepiu@…>

  • bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu, replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
  • Property mode set to 100644
File size: 7.4 KB
Line 
12001-12-22      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
2
3        * bsp_specs: Replace -lrtemsall with -lrtemsbsp -lrtemscpu,
4        replace -lrtemsall_g with -lrtemsbsp_g -lrtemscpu_g.
5
62001-11-30      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
7
8        * configure.ac: Introduce RTEMS_BSP_CONFIGURE.
9
102001-10-12      Joel Sherrill <joel@OARcorp.com>
11
12        * console/inch.c: Fixed typo.
13
142001-10-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
15
16        * .cvsignore: Add autom4te.cache for autoconf > 2.52.
17        * configure.in: Remove.
18        * configure.ac: New file, generated from configure.in by autoupdate.
19
202001-09-27      Joel Sherrill <joel@OARcorp.com>
21
22        * include/bsp.h: Renamed delay() to rtems_bsp_delay().
23
242001-09-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
25
26        * include/Makefile.am: Use 'CLEANFILES ='.
27        * include/Makefile.am: Use 'PREINSTALL_FILES ='.
28        * console/Makefile.am: Use 'PREINSTALL_FILES ='.
29        * Makefile.am: Use 'TMPINSTALL_FILES ='.
30
312001-06-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
32
33        * console/Makefile.am: Remove RTEMS_H_FILES.
34        * start/start16.S: include <bspopts.h> to get NEW_GAS.
35
362001-06-19      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
37
38        * configure.in: Add bspopts.h.
39        * include/.cvsignore: Add bspopts.h*, stamp-h*.
40        * include/Makefile.am: Use *_HEADERS instead of *H_FILES.
41        * 3c509/Makefile.am: Dito.
42        * console/Makefile.am: Dito.
43        * include/bsp.h: Include bspopts.h.
44
452001-05-10      Ralf Corsepius  <corsepiu@faw.uni-ulm.de>
46
47        * configure.in: Use RTEMS_PROG_CC_FOR_TARGET([-ansi -fasm]).
48
492001-04-29      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
50
51        * ne2000/ne2000.c: Remove #define __INSIDE_RTEMS_BSD_TCPIP_STACK__.
52
532001-01-05      Joel Sherrill <joel@OARcorp.com>
54
55        * console/vt.c: Added include of <rtems.h> so _CPU_ISR_disable
56        would be visible.
57
582000-12-05       Eric Valette <valette@crf.canon.fr>
59
60        * console/inch.c, console/keyboard.c, console/pc_keyb.c,
61        console/vt.c, include/bsp.h: Correct incorrect interrupt level
62        handling in new keyboard management code.  Correct
63        BSP_poll_char initialization routine.
64        * start/start.S, startup/bspstart.c: Correct when the video is
65        initialized.
66        * timer/timer.c (Calibrate_1ms_loop): Address problem where this
67        did not work correctly on all PC speeds. The new calibrate routine
68        has been tested on Pentium 166, pentium II 200, pentium III
69        300 Mhz and does work as expected.
70
712000-12-05      Joel Sherrill <joel@OARcorp.com>
72
73        * pc386/console/console.c, pc386/console/serial_mouse.c,
74        pc386/console/vgainit.c, shared/comm/tty_drv.c: Remove warnings.
75
762000-11-09      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
77
78        * Makefile.am: Use ... instead of RTEMS_TOPdir in ACLOCAL_AMFLAGS.
79
802000-11-02      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
81
82        * Makefile.am: Switch to ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal.
83
842000-11-01      Joel Sherrill <joel@OARcorp.com>
85
86        * startup/bspstart.c: assoc.h, error.h, libio_.h, libio.h,
87        and libcsupport.h moved from libc to lib/include/rtems and
88        now must be referenced as <rtems/XXX.h>.   Header file order
89        was cleaned up while doing this.
90
912000-10-29      Joel Sherrill <joel@OARcorp.com>
92
93        * startup/sbrk.c: Removed.  Redundant with shared version.
94
952000-10-27      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
96
97        * configure.in, Makefile.am: ACLOCAL_AMFLAGS= -I $(RTEMS_TOPdir)/macros.
98        Switch to GNU canonicalization.
99
1002000-10-23      Joel Sherrill <joel@OARcorp.com>
101
102        * console/serial_mouse.c: Fixed typos introduced by removal of CR/LF.
103
1042000-10-20      Rosimildo da Silva <rdasilva@connecttel.com>
105
106        * console/serial_mouse.c: Added support for changing serial parameters.
107
1082000-10-20      Joel Sherrill <joel@OARcorp.com>
109
110        * include/wd80x3.h: Added file header and logic to prevent multiple
111        inclusions of this file.
112        * wd8003/wd8003.c: Corrected attach to include "int attach" parameter.
113
1142000-10-20      Joel Sherrill <joel@OARcorp.com>
115
116        * include/bsp.h: Cleaned up network driver name and attach defines.
117
1182000-10-20      Dmitry Kargapolov <dk@gentex.ru>
119
120        * ne2000/ne2000.c: Fix some errors in the driver. 
121        1. There was no sufficient check of data in ethernet header.
122        The code in ne_rx_daemon() was:
123            inport_word (dport, len);
124            ...
125            len -= 4;
126              ...
127            if (len > 0)
128              ne_read_data (sc, startaddr, len, p);
129        Unfortunately, sometimes my NIC gave me too big len value,
130        the result was memory override.  To fix this, I added ethernet
131        header data checking.
132
133        2. The way overrides were serviced was not good.  It was complex
134        but sometimes did not provide reliable continuing of NIC working.
135        I had the situation of an endless loop in ne_check_status()
136        after override processing.
137
138        3. There was conceptual error of porting.  The old method of
139        overrides curing was ported from the OS-s, where override-processing
140        did start immediately.  But RTEMS-version uses events, and cleaning
141        of the overrides can start later.
142
143        I selected the way of ne2000 programming that is used
144        in freebsd kernel (v4.0).
145
146        Because of both problems, incorrect data in header of raw packet
147        and receiver override, it went through ne_reset() and fully
148        reset the ne2000.
149
150        So, in summary
151        - added detecting of the incorrect data in ethernet header;
152        - replaced handling of receiver overrides with new scheme,
153        via resetting of NIC, this method is used also in case of
154        invalid header detecting.
155
1562000-10-18       Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
157
158        * console/console.c, console/serial_mouse.c, include/bsp.h:
159        Add the ability to set parity, number of data bits and
160        number of stop bits to the existing i386 serial drivers.
161
1622000-10-17      Joel Sherrill <joel@OARcorp.com>
163
164        * startup/Makefile.am: Added idt.c since it has been moved libcpu/i386
165        to libbsp/i386/shared/irq.
166
1672000-09-29      Charles-Antoine Gauthier <charles.gauthier@nrc.ca>
168
169        * startup/linkcmds: Added lines so DWARF debug information
170        would be available.  Otherwise gdb complains that the offsets
171        for the debug info are incorrect and doesn't load the files.
172
1732000-09-11      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
174
175        * start/Makefile.am: Remove AM_CPPFLAGS and GAS_CODE16 conditional.
176
1772000-09-04      Ralf Corsepius <corsepiu@faw.uni-ulm.de>
178
179        * 3c509/Makefile.am, clock/Makefile.am, console/Makefile.am,
180        ne2000/Makefile.am, start/Makefile.am, startup/Makefile.am,
181        timer/Makefile.am, wd8003/Makefile.am, wrapup/Makefile.am: Include
182        compile.am
183
1842000-08-30      Joel Sherrill <joel@OARcorp.com>
185
186        * console/keyboard.h: Changed numerous routines from extern inline
187        to static inline.
188
1892000-08-26  Rosimildo da Silva  <rdasilva@connecttel.com>
190
191        * Major rework of the "/dev/console" driver.
192        * Added termios support for stdin ( keyboard ).
193        * Added ioctls() to support modes similar to Linux( XLATE,
194        RAW, MEDIUMRAW ).
195        * Added Keyboard mapping and handling of the keyboard's leds.
196        * Added Micro FrameBuffer driver ( "/dev/fb0" ) for bare VGA
197        controller ( 16 colors ).
198        * Added PS/2 and Serial mouse support for PC386 BSP.
199        * console/defkeymap.c: New file.
200        * console/fb_vga.c: New file.
201        * console/fb_vga.h: New file.
202        * console/i386kbd.h: New file.
203        * console/kd.h: New file.
204        * console/keyboard.c: New file.
205        * console/keyboard.h: New file.
206        * console/mouse_parser.c: New file.
207        * console/mouse_parser.h: New file.
208        * console/pc_keyb.c: New file.
209        * console/ps2_drv.h: New file.
210        * console/ps2_mouse.c: New file.
211        * console/ps2_mouse.h: New file.
212        * console/serial_mouse.c: New file.
213        * console/serial_mouse.h: New file.
214        * console/vgainit.c: New file.
215        * console/vt.c: New file.
216        * console/Makefile.am: Reflect new files.
217        * console/console.c, console/inch.c, console/outch.c: Console
218        functionality modifications.
219        * startup/Makefile.am: Pick up tty_drv.c and gdb_glue.c
220
2212000-08-10      Joel Sherrill <joel@OARcorp.com>
222
223        * ChangeLog: New file.
Note: See TracBrowser for help on using the repository browser.