/*-------------------------------------------------------------------------+ | console.c v1.1 - i386ex BSP - 1997/08/07 +--------------------------------------------------------------------------+ | This file contains the i386ex console I/O package. It is just a termios | wrapper. +--------------------------------------------------------------------------+ | (C) Copyright 1997 - | - NavIST Group - Real-Time Distributed Systems and Industrial Automation | | http://pandora.ist.utl.pt | | Instituto Superior Tecnico * Lisboa * PORTUGAL +--------------------------------------------------------------------------+ | Disclaimer: | | This file is provided "AS IS" without warranty of any kind, either | expressed or implied. +--------------------------------------------------------------------------+ | This code is based on: | console.c,v 1.4 1995/12/19 20:07:23 joel Exp - go32 BSP | console.c,v 1.15 pc386 BSP | With the following copyright notice: | ************************************************************************** | * COPYRIGHT (c) 1989-1998. | * On-Line Applications Research Corporation (OAR). | * Copyright assigned to U.S. Government, 1994. | * | * The license and distribution terms for this file may be | * found in found in the file LICENSE in this distribution or at | * http://www.OARcorp.com/rtems/license.html. | ************************************************************************** | | $Id$ +--------------------------------------------------------------------------*/ #include #include #include /* workaround for gcc development tools */ #undef __assert void __assert (const char *file, int line, const char *msg); #include #include #include #include #include #include /* * Possible value for console input/output : * BSP_UART_COM1 * BSP_UART_COM2 * BSP_CONSOLE_PORT_CONSOLE is not valid in this BSP. * All references to either keyboard or video handling have been removed. */ int BSPConsolePort = BSP_UART_COM2; int BSPBaseBaud = 781250; int BSP_poll_read(int); extern BSP_polling_getchar_function_type BSP_poll_char; static int conSetAttr(int minor, const struct termios *); static void isr_on(const rtems_irq_connect_data *); static void isr_off(const rtems_irq_connect_data *); static int isr_is_on(const rtems_irq_connect_data *); /* * Change references to com2 if required. */ static rtems_irq_connect_data console_isr_data = { BSP_UART_COM2_IRQ, BSP_uart_termios_isr_com2, isr_on, isr_off, isr_is_on}; static void isr_on(const rtems_irq_connect_data *unused) { return; } static void isr_off(const rtems_irq_connect_data *unused) { return; } static int isr_is_on(const rtems_irq_connect_data *irq) { return BSP_irq_enabled_at_i8259s(irq->name); } void console_reserve_resources(rtems_configuration_table *conf) { rtems_termios_reserve_resources(conf, 1); return; } void __assert (const char *file, int line, const char *msg) { static char exit_msg[] = "EXECUTIVE SHUTDOWN! Any key to reboot..."; unsigned char ch; /* * Note we cannot call exit or printf from here, * assert can fail inside ISR too */ /* * Close console */ close(2); close(1); close(0); printk("\nassert failed: %s: ", file); printk("%d: ", line); printk("%s\n\n", msg); printk(exit_msg); ch = BSP_poll_char(); printk("\nShould jump to reset now!\n"); } /*-------------------------------------------------------------------------+ | Console device driver INITIALIZE entry point. +--------------------------------------------------------------------------+ | Initilizes the I/O console (keyboard + VGA display) driver. +--------------------------------------------------------------------------*/ rtems_device_driver console_initialize(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_status_code status; /* * Set up TERMIOS */ rtems_termios_initialize (); /* * Do device-specific initialization */ /* 9600-8-N-1, no hardware flow control */ BSP_uart_init(BSPConsolePort, 9600, 0); /* Set interrupt handler */ if(BSPConsolePort == BSP_UART_COM1) { console_isr_data.name = BSP_UART_COM1_IRQ; console_isr_data.hdl = BSP_uart_termios_isr_com1; } else { assert(BSPConsolePort == BSP_UART_COM2); console_isr_data.name = BSP_UART_COM2_IRQ; console_isr_data.hdl = BSP_uart_termios_isr_com2; } status = BSP_install_rtems_irq_handler(&console_isr_data); if (!status){ printk("Error installing serial console interrupt handler!\n"); rtems_fatal_error_occurred(status); } /* * Register the device */ status = rtems_io_register_name ("/dev/console", major, 0); if (status != RTEMS_SUCCESSFUL) { printk("Error registering console device!\n"); rtems_fatal_error_occurred (status); } if(BSPConsolePort == BSP_UART_COM1) { printk("Initialized console on port COM1 9600-8-N-1\n\n"); } else { printk("Initialized console on port COM2 9600-8-N-1\n\n"); } return RTEMS_SUCCESSFUL; } /* console_initialize */ static int console_open_count = 0; static int console_last_close(int major, int minor, void *arg) { BSP_remove_rtems_irq_handler (&console_isr_data); return 0; } /*-------------------------------------------------------------------------+ | Console device driver OPEN entry point +--------------------------------------------------------------------------*/ rtems_device_driver console_open(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_status_code status; static rtems_termios_callbacks cb = { NULL, /* firstOpen */ console_last_close, /* lastClose */ NULL, /* poll read */ BSP_uart_termios_write_com2, /* write */ conSetAttr, /* setAttributes */ NULL, /* stopRemoteTx */ NULL, /* startRemoteTx */ 1 /* outputUsesInterrupts */ }; if(BSPConsolePort == BSP_UART_COM2) { cb.write = BSP_uart_termios_write_com2; } status = rtems_termios_open (major, minor, arg, &cb); if(status != RTEMS_SUCCESSFUL) { printk("Error openning console device\n"); return status; } /* * Pass data area info down to driver */ BSP_uart_termios_set(BSPConsolePort, ((rtems_libio_open_close_args_t *)arg)->iop->data1); /* Enable interrupts on channel */ BSP_uart_intr_ctrl(BSPConsolePort, BSP_UART_INTR_CTRL_TERMIOS); return RTEMS_SUCCESSFUL; } /*-------------------------------------------------------------------------+ | Console device driver CLOSE entry point +--------------------------------------------------------------------------*/ rtems_device_driver console_close(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { return (rtems_termios_close (arg)); } /* console_close */ /*-------------------------------------------------------------------------+ | Console device driver READ entry point. +--------------------------------------------------------------------------+ | Read characters from the I/O console. We only have stdin. +--------------------------------------------------------------------------*/ rtems_device_driver console_read(rtems_device_major_number major, rtems_device_minor_number minor, void *arg) { rtems_status_code sc; printf("read the console\n"); sc = rtems_termios_read (arg); if ( sc != RTEMS_SUCCESSFUL ) printf("console_read: fails %s\n",rtems_status_text(sc)); return sc; } /* console_read */ /*-------------------------------------------------------------------------+ | Console device driver WRITE entry point. +--------------------------------------------------------------------------+ | Write characters to the I/O console. Stderr and stdout are the same. +--------------------------------------------------------------------------*/ rtems_device_driver console_write(rtems_device_major_number major, rtems_device_minor_number minor, void * arg) { return rtems_termios_write (arg); } /* console_write */ /* * Handle ioctl request. */ rtems_device_driver console_control(rtems_device_major_number major, rtems_device_minor_number minor, void * arg ) { return rtems_termios_ioctl (arg); } static int conSetAttr(int minor, const struct termios *t) { int baud; switch (t->c_cflag & CBAUD) { case B50: baud = 50; break; case B75: baud = 75; break; case B110: baud = 110; break; case B134: baud = 134; break; case B150: baud = 150; break; case B200: baud = 200; break; case B300: baud = 300; break; case B600: baud = 600; break; case B1200: baud = 1200; break; case B1800: baud = 1800; break; case B2400: baud = 2400; break; case B4800: baud = 4800; break; case B9600: baud = 9600; break; case B19200: baud = 19200; break; case B38400: baud = 38400; break; case B57600: baud = 57600; break; case B115200: baud = 115200; break; default: baud = 0; rtems_fatal_error_occurred (RTEMS_INTERNAL_ERROR); return 0; } BSP_uart_set_baud(BSPConsolePort, baud); return 0; } /* * BSP initialization */ BSP_output_char_function_type BSP_output_char = (BSP_output_char_function_type) BSP_output_char_via_serial; BSP_polling_getchar_function_type BSP_poll_char = (BSP_polling_getchar_function_type) BSP_poll_char_via_serial; int BSP_poll_read(int ttyMinor){ return BSP_poll_char_via_serial(); }