source: rtems/c/src/lib/libbsp/i386/force386/startup/bspstart.c @ 7150f00f

4.104.114.84.95
Last change on this file since 7150f00f was 98e4ebf, checked in by Joel Sherrill <joel.sherrill@…>, on Oct 8, 1997 at 3:45:54 PM

Fixed typo in the pointer to the license terms.

  • Property mode set to 100644
File size: 5.1 KB
Line 
1/*  bsp_start()
2 *
3 *  This routine starts the application.  It includes application,
4 *  board, and monitor specific initialization and configuration.
5 *  The generic CPU dependent initialization has been performed
6 *  before this routine is invoked.
7 *
8 *  INPUT:  NONE
9 *
10 *  OUTPUT: NONE
11 *
12 *  COPYRIGHT (c) 1989-1997.
13 *  On-Line Applications Research Corporation (OAR).
14 *  Copyright assigned to U.S. Government, 1994.
15 *
16 *  The license and distribution terms for this file may be
17 *  found in the file LICENSE in this distribution or at
18 *  http://www.OARcorp.com/rtems/license.html.
19 *
20 *  $Id$
21 */
22
23#include <bsp.h>
24#include <rtems/libio.h>
25
26#include <libcsupport.h>
27
28#include <fcntl.h>
29
30#ifdef STACK_CHECKER_ON
31#include <stackchk.h>
32#endif
33
34/*
35 *  The original table from the application and our copy of it with
36 *  some changes.
37 */
38
39extern rtems_configuration_table  Configuration;
40rtems_configuration_table  BSP_Configuration;
41
42rtems_cpu_table Cpu_table;
43
44char *rtems_progname;
45
46/*      Initialize whatever libc we are using
47 *      called from postdriver hook
48 */
49
50void bsp_libc_init()
51{
52    extern int end;
53    rtems_unsigned32        heap_start;
54
55    heap_start = (rtems_unsigned32) &end;
56    if (heap_start & (CPU_ALIGNMENT-1))
57        heap_start = (heap_start + CPU_ALIGNMENT) & ~(CPU_ALIGNMENT-1);
58
59    RTEMS_Malloc_Initialize((void *) heap_start, 64 * 1024, 0);
60
61    /*
62     *  Init the RTEMS libio facility to provide UNIX-like system
63     *  calls for use by newlib (ie: provide __rtems_open, __rtems_close, etc)
64     *  Uses malloc() to get area for the iops, so must be after malloc init
65     */
66
67    rtems_libio_init();
68
69    /*
70     * Set up for the libc handling.
71     */
72
73    if (BSP_Configuration.ticks_per_timeslice > 0)
74        libc_init(1);                /* reentrant if possible */
75    else
76        libc_init(0);                /* non-reentrant */
77}
78
79/*
80 *  Function:   bsp_pretasking_hook
81 *  Created:    95/03/10
82 *
83 *  Description:
84 *      BSP pretasking hook.  Called just before drivers are initialized.
85 *      Used to setup libc and install any BSP extensions.
86 *
87 *  NOTES:
88 *      Must not use libc (to do io) from here, since drivers are
89 *      not yet initialized.
90 *
91 */
92 
93void
94bsp_pretasking_hook(void)
95{
96    bsp_libc_init();
97 
98#ifdef STACK_CHECKER_ON
99    /*
100     *  Initialize the stack bounds checker
101     *  We can either turn it on here or from the app.
102     */
103 
104    Stack_check_Initialize();
105#endif
106 
107#ifdef RTEMS_DEBUG
108    rtems_debug_enable( RTEMS_DEBUG_ALL_MASK );
109#endif
110}
111 
112
113/*
114 * After drivers are setup, register some "filenames"
115 * and open stdin, stdout, stderr files
116 *
117 * Newlib will automatically associate the files with these
118 * (it hardcodes the numbers)
119 */
120 
121void
122bsp_postdriver_hook(void)
123{
124  int stdin_fd, stdout_fd, stderr_fd;
125  int error_code;
126 
127  error_code = 'S' << 24 | 'T' << 16;
128 
129  if ((stdin_fd = __rtems_open("/dev/console", O_RDONLY, 0)) == -1)
130    rtems_fatal_error_occurred( error_code | 'D' << 8 | '0' );
131 
132  if ((stdout_fd = __rtems_open("/dev/console", O_WRONLY, 0)) == -1)
133    rtems_fatal_error_occurred( error_code | 'D' << 8 | '1' );
134 
135  if ((stderr_fd = __rtems_open("/dev/console", O_WRONLY, 0)) == -1)
136    rtems_fatal_error_occurred( error_code | 'D' << 8 | '2' );
137 
138  if ((stdin_fd != 0) || (stdout_fd != 1) || (stderr_fd != 2))
139    rtems_fatal_error_occurred( error_code | 'I' << 8 | 'O' );
140}
141
142int main(
143  int argc,
144  char **argv,
145  char **environp
146)
147{
148 
149  if ((argc > 0) && argv && argv[0])
150    rtems_progname = argv[0];
151  else
152    rtems_progname = "RTEMS";
153 
154  /*
155   *  FORCE documentation incorrectly states that the bus request
156   *  level is initialized to 3.  It is actually initialized by
157   *  FORCEbug to 0.
158   */
159
160  outport_byte( 0x00, 0x3f );      /* resets VMEbus request level */
161
162  /*
163   *  we do not use the pretasking_hook.
164   */
165
166  Cpu_table.pretasking_hook = bsp_pretasking_hook;  /* init libc, etc. */
167
168  Cpu_table.predriver_hook = NULL;
169
170  Cpu_table.postdriver_hook = bsp_postdriver_hook;
171
172  Cpu_table.idle_task = NULL;  /* do not override system IDLE task */
173
174  Cpu_table.do_zero_of_workspace = TRUE;
175
176  Cpu_table.interrupt_table_segment = get_ds();
177
178  Cpu_table.interrupt_table_offset = (void *)Interrupt_descriptor_table;
179
180  Cpu_table.interrupt_stack_size = 4096;
181
182  Cpu_table.extra_mpci_receive_server_stack = 0;
183
184  /*
185   *  Copy the table
186   */
187
188  BSP_Configuration = Configuration;
189
190  BSP_Configuration.work_space_start = (void *)
191     RAM_END - BSP_Configuration.work_space_size;
192
193  /*
194   * Add 1 region for Malloc in libc_low
195   */
196
197  BSP_Configuration.RTEMS_api_configuration->maximum_regions++;
198
199  /*
200   * Add 1 extension for newlib libc
201   */
202
203#ifdef RTEMS_NEWLIB
204    BSP_Configuration.maximum_extensions++;
205#endif
206
207  /*
208   * Add another extension if using the stack checker
209   */
210
211#ifdef STACK_CHECKER_ON
212    BSP_Configuration.maximum_extensions++;
213#endif
214
215  /*
216   * Tell libio how many fd's we want and allow it to tweak config
217   */
218
219  rtems_libio_config(&BSP_Configuration, BSP_LIBIO_MAX_FDS);
220
221  rtems_initialize_executive( &BSP_Configuration, &Cpu_table );
222  /* does not return */
223  /* no cleanup necessary for Force CPU-386 */
224  return 0;
225}
Note: See TracBrowser for help on using the repository browser.