source: rtems/c/src/lib/libbsp/i386/force386/console/console.c @ d637822

4.104.114.84.95
Last change on this file since d637822 was 98e4ebf5, checked in by Joel Sherrill <joel.sherrill@…>, on 10/08/97 at 15:45:54

Fixed typo in the pointer to the license terms.

  • Property mode set to 100644
File size: 5.2 KB
Line 
1/*
2 *  This file contains the Force CPU386 console IO package.
3 *
4 *  COPYRIGHT (c) 1989-1997.
5 *  On-Line Applications Research Corporation (OAR).
6 *  Copyright assigned to U.S. Government, 1994.
7 *
8 *  The license and distribution terms for this file may be
9 *  found in the file LICENSE in this distribution or at
10 *  http://www.OARcorp.com/rtems/license.html.
11 *
12 *  $Id$
13 */
14
15#define F386_INIT
16
17#include <bsp.h>
18#include <rtems/libio.h>
19
20#include <stdlib.h>
21
22/*  console_cleanup
23 *
24 *  This routine is called at exit to clean up the console hardware.
25 *
26 *  Input parameters: NONE
27 *
28 *  Output parameters:  NONE
29 *
30 *  Return values:
31 */
32
33void console_cleanup( void )
34{
35  register rtems_unsigned8 ignored;
36  /*
37   *  FORCE technical support mentioned that it may be necessary to
38   *  read the DUSCC RX_BUFFER port four times to remove all junk.
39   *  This code is a little more paranoid.
40   */
41
42   inport_byte( RX_BUFFER, ignored );
43   inport_byte( RX_BUFFER, ignored );
44   inport_byte( RX_BUFFER, ignored );
45   inport_byte( RX_BUFFER, ignored );
46   inport_byte( RX_BUFFER, ignored );
47}
48
49/*  console_initialize
50 *
51 *  This routine initializes the console IO driver.
52 *
53 *  Input parameters: NONE
54 *
55 *  Output parameters:  NONE
56 *
57 *  Return values:
58 */
59
60rtems_device_driver console_initialize(
61  rtems_device_major_number  major,
62  rtems_device_minor_number  minor,
63  void                      *arg
64)
65{
66  rtems_status_code status;
67
68  /*
69   *  flush the console now and at exit.  Just in case.
70   */
71
72  console_cleanup();
73
74  status = rtems_io_register_name(
75    "/dev/console",
76    major,
77    (rtems_device_minor_number) 0
78  );
79 
80  if (status != RTEMS_SUCCESSFUL)
81    rtems_fatal_error_occurred(status);
82
83  atexit( console_cleanup );
84
85  return RTEMS_SUCCESSFUL;
86}
87
88
89/*  is_character_ready
90 *
91 *  This routine returns TRUE if a character is available.
92 *
93 *  Input parameters: NONE
94 *
95 *  Output parameters:  NONE
96 *
97 *  Return values:
98 */
99
100rtems_boolean is_character_ready(
101  char *ch
102)
103{
104  register rtems_unsigned8 status;
105
106  inport_byte( RX_STATUS, status );
107
108  if ( Is_rx_ready( status ) ) {
109     inport_byte( RX_BUFFER,  status );
110     *ch = status;
111     return TRUE;
112  }
113  return FALSE;
114}
115
116/*  inbyte
117 *
118 *  This routine reads a character from the UART.
119 *
120 *  Input parameters: NONE
121 *
122 *  Output parameters:  NONE
123 *
124 *  Return values:
125 *    character read from UART
126 */
127
128char inbyte( void )
129{
130  register rtems_unsigned8 status;
131  char                     ch;
132
133  do {
134    inport_byte( RX_STATUS, status );
135  } while ( !Is_rx_ready( status ) );
136
137#if ( PORTB == 1 )
138  /*
139   *  Force example code resets the Channel B Receiver here.
140   *  It appears to cause XON's to be lost.
141   */
142
143   /* outport_byte( RX_STATUS, 0x10 );  */
144#endif
145
146  inport_byte( RX_BUFFER, ch );
147
148  return ch;
149}
150
151/*  outbyte
152 *
153 *  This routine transmits a character out the port.  It supports
154 *  XON/XOFF flow control.
155 *
156 *  Input parameters:
157 *    ch  - character to be transmitted
158 *
159 *  Output parameters:  NONE
160 */
161
162void outbyte(
163  char ch
164)
165{
166  rtems_unsigned8 status;
167
168  do {
169    inport_byte( TX_STATUS, status );
170  } while ( !Is_tx_ready( status ) );
171
172#if 0
173  while ( is_character_ready( &status ) == TRUE ) {      /* must be an XOFF */
174    if ( status == XOFF )
175      do {
176        while ( is_character_ready( &status ) == FALSE ) ;
177      } while ( status != XON );
178  }
179#endif
180
181  outport_byte( TX_BUFFER, ch );
182}
183
184/*
185 *  Open entry point
186 */
187 
188rtems_device_driver console_open(
189  rtems_device_major_number major,
190  rtems_device_minor_number minor,
191  void                    * arg
192)
193{
194  return RTEMS_SUCCESSFUL;
195}
196 
197/*
198 *  Close entry point
199 */
200 
201rtems_device_driver console_close(
202  rtems_device_major_number major,
203  rtems_device_minor_number minor,
204  void                    * arg
205)
206{
207  return RTEMS_SUCCESSFUL;
208}
209
210/*
211 * read bytes from the serial port. We only have stdin.
212 */
213 
214rtems_device_driver console_read(
215  rtems_device_major_number major,
216  rtems_device_minor_number minor,
217  void                    * arg
218)
219{
220  rtems_libio_rw_args_t *rw_args;
221  char *buffer;
222  int maximum;
223  int count = 0;
224 
225  rw_args = (rtems_libio_rw_args_t *) arg;
226 
227  buffer = rw_args->buffer;
228  maximum = rw_args->count;
229 
230  for (count = 0; count < maximum; count++) {
231    buffer[ count ] = inbyte();
232    if (buffer[ count ] == '\n' || buffer[ count ] == '\r') {
233      buffer[ count++ ]  = '\n';
234      break;
235    }
236  }
237 
238  rw_args->bytes_moved = count;
239  return (count >= 0) ? RTEMS_SUCCESSFUL : RTEMS_UNSATISFIED;
240}
241 
242/*
243 * write bytes to the serial port. Stdout and stderr are the same.
244 */
245 
246rtems_device_driver console_write(
247  rtems_device_major_number major,
248  rtems_device_minor_number minor,
249  void                    * arg
250)
251{
252  int count;
253  int maximum;
254  rtems_libio_rw_args_t *rw_args;
255  char *buffer;
256 
257  rw_args = (rtems_libio_rw_args_t *) arg;
258 
259  buffer = rw_args->buffer;
260  maximum = rw_args->count;
261 
262  for (count = 0; count < maximum; count++) {
263    if ( buffer[ count ] == '\n') {
264      outbyte('\r');
265    }
266    outbyte( buffer[ count ] );
267  }
268
269  rw_args->bytes_moved = maximum;
270  return 0;
271}
272 
273/*
274 *  IO Control entry point
275 */
276 
277rtems_device_driver console_control(
278  rtems_device_major_number major,
279  rtems_device_minor_number minor,
280  void                    * arg
281)
282{
283  return RTEMS_SUCCESSFUL;
284}
285
Note: See TracBrowser for help on using the repository browser.