source: rtems/c/src/lib/libbsp/bare/include/bsp.h @ 4de102cc

4.104.114.84.95
Last change on this file since 4de102cc was cf282090, checked in by Joel Sherrill <joel.sherrill@…>, on 09/28/01 at 13:28:11

2001-09-27 Joel Sherrill <joel@…>

  • include/bsp.h: Renamed delay() to rtems_bsp_delay().
  • Property mode set to 100644
File size: 1.9 KB
Line 
1/*  bsp.h
2 *
3 *  This include file contains all board IO definitions.
4 *
5 *  BARE : Allows you to build RTEMS with-out any BSP specific stuff
6 *
7 *  COPYRIGHT (c) 1989-1999.
8 *  On-Line Applications Research Corporation (OAR).
9 *
10 *  The license and distribution terms for this file may be
11 *  found in the file LICENSE in this distribution or at
12 *  http://www.OARcorp.com/rtems/license.html.
13 *
14 *  $Id$
15*/
16
17#ifndef __BARE_BSP_h
18#define __BARE_BSP_h
19
20#ifdef __cplusplus
21extern "C" {
22#endif
23
24#include <bspopts.h>
25
26#include <rtems.h>
27#include <console.h>
28#include <clockdrv.h>
29
30/*
31 *  confdefs.h overrides for this BSP:
32 *   - number of termios serial ports (defaults to 1)
33 *   - Interrupt stack space is not minimum if defined.
34 */
35
36/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
37#define CONFIGURE_INTERRUPT_STACK_MEMORY  (12 * 1024)
38
39/*
40 *  Define the time limits for RTEMS Test Suite test durations.
41 *  Long test and short test duration limits are provided.  These
42 *  values are in seconds and need to be converted to ticks for the
43 *  application.
44 *
45 */
46
47#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
48#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
49
50/*
51 *  Stuff for Time Test 27
52 */
53
54#define MUST_WAIT_FOR_INTERRUPT 0
55
56#define Install_tm27_vector( handler )
57
58#define Cause_tm27_intr()
59
60#define Clear_tm27_intr()
61
62#define Lower_tm27_intr()
63
64/*
65 *  Simple spin delay in microsecond units for device drivers.
66 *  This is very dependent on the clock speed of the target.
67 */
68
69#define rtems_bsp_delay( microseconds ) \
70  { \
71  }
72
73/* miscellaneous stuff assumed to exist */
74
75extern rtems_configuration_table BSP_Configuration;
76
77/*
78 *  Device Driver Table Entries
79 */
80
81/*
82 * NOTE: Use the standard Console driver entry
83 */
84 
85/*
86 * NOTE: Use the standard Clock driver entry
87 */
88
89/*
90 * How many libio files we want
91 */
92
93#define BSP_LIBIO_MAX_FDS       20
94
95/* functions */
96
97#ifdef __cplusplus
98}
99#endif
100
101#endif
102/* end of include file */
Note: See TracBrowser for help on using the repository browser.