| 1 | ## |
|---|
| 2 | # |
|---|
| 3 | # @file |
|---|
| 4 | # |
|---|
| 5 | # @brief Configure script of LibBSP for the LPC32XX boards. |
|---|
| 6 | # |
|---|
| 7 | |
|---|
| 8 | AC_PREREQ([2.69]) |
|---|
| 9 | AC_INIT([rtems-c-src-lib-libbsp-arm-lpc32xx],[_RTEMS_VERSION],[https://devel.rtems.org/newticket]) |
|---|
| 10 | AC_CONFIG_SRCDIR([make/custom/lpc32xx_mzx.cfg]) |
|---|
| 11 | RTEMS_TOP(../../../../../..) |
|---|
| 12 | RTEMS_SOURCE_TOP |
|---|
| 13 | RTEMS_BUILD_TOP |
|---|
| 14 | RTEMS_BSP_LINKCMDS |
|---|
| 15 | |
|---|
| 16 | RTEMS_CANONICAL_TARGET_CPU |
|---|
| 17 | AM_INIT_AUTOMAKE([no-define nostdinc foreign subdir-objects 1.12.2]) |
|---|
| 18 | RTEMS_BSP_CONFIGURE |
|---|
| 19 | |
|---|
| 20 | |
|---|
| 21 | |
|---|
| 22 | RTEMS_BSPOPTS_SET([LPC32XX_OSCILLATOR_MAIN],[*],[13000000U]) |
|---|
| 23 | RTEMS_BSPOPTS_HELP([LPC32XX_OSCILLATOR_MAIN],[main oscillator frequency in Hz]) |
|---|
| 24 | |
|---|
| 25 | RTEMS_BSPOPTS_SET([LPC32XX_OSCILLATOR_RTC],[*],[32768U]) |
|---|
| 26 | RTEMS_BSPOPTS_HELP([LPC32XX_OSCILLATOR_RTC],[RTC oscillator frequency in Hz]) |
|---|
| 27 | |
|---|
| 28 | RTEMS_BSPOPTS_SET([LPC32XX_PERIPH_CLK],[*],[13000000U]) |
|---|
| 29 | RTEMS_BSPOPTS_HELP([LPC32XX_PERIPH_CLK],[peripheral clock in Hz]) |
|---|
| 30 | |
|---|
| 31 | RTEMS_BSPOPTS_SET([LPC32XX_ETHERNET_RMII],[*],[1]) |
|---|
| 32 | RTEMS_BSPOPTS_HELP([LPC32XX_ETHERNET_RMII],[enable RMII for Ethernet]) |
|---|
| 33 | |
|---|
| 34 | RTEMS_BSPOPTS_SET([LPC32XX_UART_1_BAUD],[*],[]) |
|---|
| 35 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_1_BAUD],[baud for UART 1]) |
|---|
| 36 | |
|---|
| 37 | RTEMS_BSPOPTS_SET([LPC32XX_UART_2_BAUD],[*],[]) |
|---|
| 38 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_2_BAUD],[baud for UART 2]) |
|---|
| 39 | |
|---|
| 40 | RTEMS_BSPOPTS_SET([LPC32XX_UART_3_BAUD],[*],[115200]) |
|---|
| 41 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_3_BAUD],[baud for UART 3]) |
|---|
| 42 | |
|---|
| 43 | RTEMS_BSPOPTS_SET([LPC32XX_UART_4_BAUD],[*],[115200]) |
|---|
| 44 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_4_BAUD],[baud for UART 4]) |
|---|
| 45 | |
|---|
| 46 | RTEMS_BSPOPTS_SET([LPC32XX_UART_5_BAUD],[*],[115200]) |
|---|
| 47 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_5_BAUD],[baud for UART 5]) |
|---|
| 48 | |
|---|
| 49 | RTEMS_BSPOPTS_SET([LPC32XX_UART_6_BAUD],[*],[115200]) |
|---|
| 50 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_6_BAUD],[baud for UART 6]) |
|---|
| 51 | |
|---|
| 52 | RTEMS_BSPOPTS_SET([LPC32XX_UART_7_BAUD],[*],[]) |
|---|
| 53 | RTEMS_BSPOPTS_HELP([LPC32XX_UART_7_BAUD],[baud for UART 7]) |
|---|
| 54 | |
|---|
| 55 | RTEMS_BSPOPTS_SET([LPC32XX_CONFIG_U3CLK],[*],[0x00001386]) |
|---|
| 56 | RTEMS_BSPOPTS_HELP([LPC32XX_CONFIG_U3CLK],[clock configuration for UART 3]) |
|---|
| 57 | |
|---|
| 58 | RTEMS_BSPOPTS_SET([LPC32XX_CONFIG_U4CLK],[*],[0x00001386]) |
|---|
| 59 | RTEMS_BSPOPTS_HELP([LPC32XX_CONFIG_U4CLK],[clock configuration for UART 4]) |
|---|
| 60 | |
|---|
| 61 | RTEMS_BSPOPTS_SET([LPC32XX_CONFIG_U5CLK],[*],[0x00001386]) |
|---|
| 62 | RTEMS_BSPOPTS_HELP([LPC32XX_CONFIG_U5CLK],[clock configuration for UART 5]) |
|---|
| 63 | |
|---|
| 64 | RTEMS_BSPOPTS_SET([LPC32XX_CONFIG_U6CLK],[*],[0x00001386]) |
|---|
| 65 | RTEMS_BSPOPTS_HELP([LPC32XX_CONFIG_U6CLK],[clock configuration for UART 6]) |
|---|
| 66 | |
|---|
| 67 | RTEMS_BSPOPTS_SET([LPC32XX_DISABLE_MMU],[*],[]) |
|---|
| 68 | RTEMS_BSPOPTS_HELP([LPC32XX_DISABLE_MMU],[disable MMU]) |
|---|
| 69 | |
|---|
| 70 | RTEMS_BSPOPTS_SET([LPC32XX_DISABLE_READ_WRITE_DATA_CACHE],[*],[]) |
|---|
| 71 | RTEMS_BSPOPTS_HELP([LPC32XX_DISABLE_READ_WRITE_DATA_CACHE],[disable cache for read-write data sections]) |
|---|
| 72 | |
|---|
| 73 | RTEMS_BSPOPTS_SET([LPC32XX_DISABLE_READ_ONLY_PROTECTION],[*],[]) |
|---|
| 74 | RTEMS_BSPOPTS_HELP([LPC32XX_DISABLE_READ_ONLY_PROTECTION],[disable MMU protection of read-only sections]) |
|---|
| 75 | |
|---|
| 76 | RTEMS_BSPOPTS_SET([LPC32XX_SCRATCH_AREA_SIZE],[lpc32xx_mzx*],[4096]) |
|---|
| 77 | RTEMS_BSPOPTS_HELP([LPC32XX_SCRATCH_AREA_SIZE],[size of scratch area]) |
|---|
| 78 | |
|---|
| 79 | RTEMS_BSPOPTS_SET([LPC32XX_STOP_GPDMA],[*],[1]) |
|---|
| 80 | RTEMS_BSPOPTS_HELP([LPC32XX_STOP_GPDMA],[stop general purpose DMA at start-up to avoid DMA interference]) |
|---|
| 81 | |
|---|
| 82 | RTEMS_BSPOPTS_SET([LPC32XX_STOP_ETHERNET],[*],[1]) |
|---|
| 83 | RTEMS_BSPOPTS_HELP([LPC32XX_STOP_ETHERNET],[stop Ethernet controller at start-up to avoid DMA interference]) |
|---|
| 84 | |
|---|
| 85 | RTEMS_BSPOPTS_SET([LPC32XX_STOP_USB],[*],[1]) |
|---|
| 86 | RTEMS_BSPOPTS_HELP([LPC32XX_STOP_USB],[stop USB controller at start-up to avoid DMA interference]) |
|---|
| 87 | |
|---|
| 88 | RTEMS_BSPOPTS_SET([LPC32XX_ENABLE_WATCHDOG_RESET],[*],[1]) |
|---|
| 89 | RTEMS_BSPOPTS_HELP([LPC32XX_ENABLE_WATCHDOG_RESET],[bsp_reset() will use the watchdog to reset the chip]) |
|---|
| 90 | |
|---|
| 91 | RTEMS_BSPOPTS_SET([LPC_DMA_CHANNEL_COUNT],[*],[8]) |
|---|
| 92 | RTEMS_BSPOPTS_HELP([LPC_DMA_CHANNEL_COUNT],[DMA channel count]) |
|---|
| 93 | |
|---|
| 94 | RTEMS_BSPOPTS_SET([BSP_START_RESET_VECTOR],[*],[]) |
|---|
| 95 | RTEMS_BSPOPTS_HELP([BSP_START_RESET_VECTOR],[reset vector address for BSP start]) |
|---|
| 96 | |
|---|
| 97 | RTEMS_BSPOPTS_SET([BSP_USB_OTG_TRANSCEIVER_I2C_ADDR],[lpc32xx_mzx*],[(0x2c << 1)]) |
|---|
| 98 | RTEMS_BSPOPTS_HELP([BSP_USB_OTG_TRANSCEIVER_I2C_ADDR],[USB OTG transceiver I2C address used by USB stack]) |
|---|
| 99 | |
|---|
| 100 | RTEMS_BSPOPTS_SET([BSP_USB_OTG_TRANSCEIVER_VBUS],[lpc32xx_mzx*],[USB_OTG_VBUS_POWER_WITH_CHARGE_PUMP]) |
|---|
| 101 | RTEMS_BSPOPTS_HELP([BSP_USB_OTG_TRANSCEIVER_VBUS],[USB OTG transceiver VBUS policy]) |
|---|
| 102 | |
|---|
| 103 | RTEMS_BSPOPTS_SET([TESTS_USE_PRINTK],[*],[1]) |
|---|
| 104 | RTEMS_BSPOPTS_HELP([TESTS_USE_PRINTK],[tests use printk() for output]) |
|---|
| 105 | |
|---|
| 106 | RTEMS_BSP_CLEANUP_OPTIONS |
|---|
| 107 | |
|---|
| 108 | AC_CONFIG_FILES([Makefile]) |
|---|
| 109 | AC_OUTPUT |
|---|
![[RTEMS Logo]](/images/logo.png){kind=logo}
