4.115
Rev | Line | |
---|
[59bdd966] | 1 | # |
---|
| 2 | # $Id$ |
---|
| 3 | # |
---|
| 4 | |
---|
[5aeed17] | 5 | Development Board: QVGA Base Board from Embedded Artists |
---|
| 6 | |
---|
[59bdd966] | 7 | http://www.embeddedartists.com/products/uclinux/oem_lpc2478.php |
---|
| 8 | |
---|
[5aeed17] | 9 | Drivers: |
---|
[9647f7fe] | 10 | |
---|
[5aeed17] | 11 | o Console |
---|
| 12 | o Clock |
---|
| 13 | o RTC |
---|
[2c4d9874] | 14 | o SSP (SPI mode) |
---|
[9647f7fe] | 15 | o Network |
---|
[7ae2775] | 16 | o I2C |
---|
[9647f7fe] | 17 | |
---|
| 18 | Howto setup QVGA Base Board? |
---|
| 19 | |
---|
| 20 | o Unpack board. |
---|
| 21 | o Connect board via USB to your PC. |
---|
| 22 | o Verify that demo application runs. |
---|
| 23 | o Disconnect board. |
---|
| 24 | o Change jumpers to enable ISP. |
---|
| 25 | o Connect board. |
---|
| 26 | o Load U-Boot image 'u-boot_v1.1.6_lpc2468oem_v1_8_16bit.hex' |
---|
| 27 | (available from the EA support page) into the flash (flash tool |
---|
| 28 | FlashMagic is availabe from NXP). |
---|
| 29 | o Change jumbers back to disable ISP. |
---|
| 30 | o Use a terminal program to change the U-Boot settings via the console. |
---|
| 31 | o U-Boot settings: |
---|
| 32 | set ethaddr '00:1a:f1:X:X:X' |
---|
| 33 | set serverip 'X.X.X.X' |
---|
| 34 | set ipaddr 'X.X.X.X' |
---|
| 35 | set rtems 'tftp a1000000 lpc2478.img;bootm' |
---|
| 36 | set bootcmd 'echo Booting RTEMS ...;run rtems' |
---|
| 37 | saveenv |
---|
| 38 | |
---|
| 39 | Application Board: NCS (Nurse Control Station) |
---|
| 40 | |
---|
| 41 | Board: NextGenNCS |
---|
[2c4d9874] | 42 | Processor: NXP LPC2478 or LPC2470 |
---|
[9647f7fe] | 43 | SDRAM: 8MByte, 16 bit wide |
---|
| 44 | Ext. Flash: 1MByte, 16 bit wide |
---|
| 45 | Console: UART, 115200 Baud |
---|
| 46 | Network: 100Base-T |
---|
[b18fd86] | 47 | |
---|
| 48 | Application Board: TLI800 |
---|
| 49 | TLI800 is a network node using four serial ports produced by Thorn |
---|
[0ed275ec] | 50 | Security Limited. It is used by Tyco Fire & Integrated Solutions for a |
---|
| 51 | fire control network. |
---|
Note: See
TracBrowser
for help on using the repository browser.