source: rtems/c/src/lib/libbsp/a29k/portsw/shmsupp/mpisr.c @ 0836603

4.104.114.84.95
Last change on this file since 0836603 was 0836603, checked in by Joel Sherrill <joel.sherrill@…>, on Sep 18, 1996 at 9:13:10 PM

new files submitted by Craig Lebakken (lebakken@…) and Derrick Ostertag
(ostertag@…)

  • Property mode set to 100644
File size: 1.3 KB
Line 
1/*  Shm_isr_nobsp()
2 *
3 *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
4 *  On-Line Applications Research Corporation (OAR).
5 *  All rights assigned to U.S. Government, 1994.
6 *
7 *  This material may be reproduced by or for the U.S. Government pursuant
8 *  to the copyright license under the clause at DFARS 252.227-7013.  This
9 *  notice must appear in all copies of this file and its derivatives.
10 *
11 *  $Id$
12 */
13
14#include <rtems.h>
15#include <bsp.h>
16#include <shm.h>
17
18#ifndef lint
19static char _sccsid[] = "@(#)mpisr.c 04/08/96     1.1\n";
20#endif
21
22rtems_isr Shm_isr_nobsp( void )
23{
24  /*
25   *  If this routine has to do anything other than the mpisr.c
26   *  found in the generic driver, then copy the contents of the generic
27   *  mpisr.c and augment it to satisfy this particular board.  Typically,
28   *  you need to have a board specific mpisr.c when the interrupt
29   *  must be cleared.
30   *
31   *  If the generic mpisr.c satisifies your requirements, then
32   *  remove this routine from your target's shmsupp/mpisb.c file.
33   *  Then simply install the generic Shm_isr in the Shm_setvec
34   *  routine below.
35   */
36}
37
38/*  Shm_setvec
39 *
40 *  This driver routine sets the SHM interrupt vector to point to the
41 *  driver's SHM interrupt service routine.
42 *
43 *  Input parameters:  NONE
44 *
45 *  Output parameters: NONE
46 */
47
48void Shm_setvec( void )
49{
50  /* XXX: FIX ME!!! */
51}
Note: See TracBrowser for help on using the repository browser.