source: rtems/c/src/exec/score/cpu/powerpc/rtems/score/asm.h @ 7713808

/*  asm.h
 *
 *  This include file attempts to address the problems
 *  caused by incompatible flavors of assemblers and
 *  toolsets.  It primarily addresses variations in the
 *  use of leading underscores on symbols and the requirement
 *  that register names be preceded by a %.
 *
 *
 *  NOTE: The spacing in the use of these macros
 *        is critical to them working as advertised.
 *
 *  COPYRIGHT:
 *
 *  This file is based on similar code found in newlib available
 *  from ftp.cygnus.com.  The file which was used had no copyright
 *  notice.  This file is freely distributable as long as the source
 *  of the file is noted.  This file is:
 *
 *  COPYRIGHT (c) 1995.
 *  i-cubed ltd.
 *
 *  COPYRIGHT (c) 1994.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  $Id$
 */

#ifndef __PPC_ASM_h
#define __PPC_ASM_h

/*
 *  Indicate we are in an assembly file and get the basic CPU definitions.
 */

#ifndef ASM
#define ASM
#endif
#include <rtems/score/targopts.h>
#include <rtems/score/ppc.h>

/*
 *  Recent versions of GNU cpp define variables which indicate the
 *  need for underscores and percents.  If not using GNU cpp or
 *  the version does not support this, then you will obviously
 *  have to define these as appropriate.
 */

#ifndef __USER_LABEL_PREFIX__
#define __USER_LABEL_PREFIX__ 
#endif

#ifndef __REGISTER_PREFIX__
#define __REGISTER_PREFIX__
#endif

#ifndef __FLOAT_REGISTER_PREFIX__
#define __FLOAT_REGISTER_PREFIX__  __REGISTER_PREFIX__
#endif

#if (PPC_ABI == PPC_ABI_POWEROPEN)
#ifndef __PROC_LABEL_PREFIX__
#define __PROC_LABEL_PREFIX__ .
#endif
#endif

#ifndef __PROC_LABEL_PREFIX__
#define __PROC_LABEL_PREFIX__  __USER_LABEL_PREFIX__
#endif

/* ANSI concatenation macros.  */

#define CONCAT1(a, b) CONCAT2(a, b)
#define CONCAT2(a, b) a ## b

/* Use the right prefix for global labels.  */

#define SYM(x) CONCAT1 (__USER_LABEL_PREFIX__, x)

/* Use the right prefix for procedure labels.  */

#define PROC(x) CONCAT1 (__PROC_LABEL_PREFIX__, x)

/* Use the right prefix for registers.  */

#define REG(x) CONCAT1 (__REGISTER_PREFIX__, x)

/* Use the right prefix for floating point registers.  */

#define FREG(x) CONCAT1 (__FLOAT_REGISTER_PREFIX__, x)

/*
 *  define macros for all of the registers on this CPU
 *
 *  EXAMPLE:     #define d0 REG (d0)
 */
#define r0 REG(0)
#define r1 REG(1)
#define r2 REG(2)
#define r3 REG(3)
#define r4 REG(4)
#define r5 REG(5)
#define r6 REG(6)
#define r7 REG(7)
#define r8 REG(8)
#define r9 REG(9)
#define r10 REG(10)
#define r11 REG(11)
#define r12 REG(12)
#define r13 REG(13)
#define r14 REG(14)
#define r15 REG(15)
#define r16 REG(16)
#define r17 REG(17)
#define r18 REG(18)
#define r19 REG(19)
#define r20 REG(20)
#define r21 REG(21)
#define r22 REG(22)
#define r23 REG(23)
#define r24 REG(24)
#define r25 REG(25)
#define r26 REG(26)
#define r27 REG(27)
#define r28 REG(28)
#define r29 REG(29)
#define r30 REG(30)
#define r31 REG(31)
#define f0 FREG(0)
#define f1 FREG(1)
#define f2 FREG(2)
#define f3 FREG(3)
#define f4 FREG(4)
#define f5 FREG(5)
#define f6 FREG(6)
#define f7 FREG(7)
#define f8 FREG(8)
#define f9 FREG(9)
#define f10 FREG(10)
#define f11 FREG(11)
#define f12 FREG(12)
#define f13 FREG(13)
#define f14 FREG(14)
#define f15 FREG(15)
#define f16 FREG(16)
#define f17 FREG(17)
#define f18 FREG(18)
#define f19 FREG(19)
#define f20 FREG(20)
#define f21 FREG(21)
#define f22 FREG(22)
#define f23 FREG(23)
#define f24 FREG(24)
#define f25 FREG(25)
#define f26 FREG(26)
#define f27 FREG(27)
#define f28 FREG(28)
#define f29 FREG(29)
#define f30 FREG(30)
#define f31 FREG(31)

/*
 * Some special purpose registers (SPRs).
 */
#define srr0    0x01a
#define srr1    0x01b
#define srr2    0x3de   /* IBM 400 series only */
#define srr3    0x3df   /* IBM 400 series only */
#define sprg0   0x110
#define sprg1   0x111
#define sprg2   0x112
#define sprg3   0x113


/* the following SPR/DCR registers exist only in IBM 400 series */
#define dear    0x3d5   
#define evpr    0x3d6   /* SPR: exception vector prefix register   */
#define iccr    0x3fb   /* SPR: instruction cache control reg.     */
#define dccr    0x3fa   /* SPR: data cache control reg.            */

#define exisr   0x040   /* DCR: external interrupt status register */
#define exier   0x042   /* DCR: external interrupt enable register */
#define br0     0x080   /* DCR: memory bank register 0             */
#define br1     0x081   /* DCR: memory bank register 1             */
#define br2     0x082   /* DCR: memory bank register 2             */
#define br3     0x083   /* DCR: memory bank register 3             */
#define br4     0x084   /* DCR: memory bank register 4             */
#define br5     0x085   /* DCR: memory bank register 5             */
#define br6     0x086   /* DCR: memory bank register 6             */
#define br7     0x087   /* DCR: memory bank register 7             */
/* end of IBM400 series register definitions */

/* The following registers are for the MPC8x0 */
#define der     0x095   /* Debug Enable Register */
/* end of MPC8x0 registers */

/*
 *  Following must be tailor for a particular flavor of the C compiler.
 *  They may need to put underscores in front of the symbols.
 */

#define PUBLIC_VAR(sym) .globl SYM (sym)
#define EXTERN_VAR(sym) .extern SYM (sym)
#define PUBLIC_PROC(sym) .globl PROC (sym)
#define EXTERN_PROC(sym) .extern PROC (sym)

/* Other potentially assembler specific operations */
#if PPC_ASM == PPC_ASM_ELF
#define ALIGN(n,p)      .align  p
#define DESCRIPTOR(x)   \
        .section .descriptors,"aw";     \
        PUBLIC_VAR (x);                 \
SYM (x):;                               \
        .long   PROC (x);               \
        .long   s.got;                  \
        .long   0

#define EXT_SYM_REF(x)  .long x
#define EXT_PROC_REF(x) .long x

/*
 *  Define macros to handle section beginning and ends.
 */

#define BEGIN_CODE_DCL .text
#define END_CODE_DCL
#define BEGIN_DATA_DCL .data
#define END_DATA_DCL
#define BEGIN_CODE .text
#define END_CODE
#define BEGIN_DATA .data
#define END_DATA
#define BEGIN_BSS  .bss
#define END_BSS
#define END

#elif PPC_ASM == PPC_ASM_XCOFF
#define ALIGN(n,p)      .align  p
#define DESCRIPTOR(x)   \
        .csect  x[DS];          \
        .globl  x[DS];          \
        .long   PROC (x)[PR];   \
        .long   TOC[tc0]

#define EXT_SYM_REF(x)  .long x[RW]
#define EXT_PROC_REF(x) .long x[DS]

/*
 *  Define macros to handle section beginning and ends.
 */

#define BEGIN_CODE_DCL .csect .text[PR]
#define END_CODE_DCL
#define BEGIN_DATA_DCL .csect .data[RW]
#define END_DATA_DCL
#define BEGIN_CODE .csect .text[PR]
#define END_CODE
#define BEGIN_DATA .csect .data[RW]
#define END_DATA
#define BEGIN_BSS  .bss
#define END_BSS
#define END

#else
#error "PPC_ASM_TYPE is not properly defined"
#endif
#ifndef PPC_ASM
#error "PPC_ASM_TYPE is not properly defined"
#endif


#endif
/* end of include file */