[6b45e470] | 1 | /* cpu.h |
---|
| 2 | * |
---|
| 3 | * This include file contains information pertaining to the PowerPC |
---|
| 4 | * processor. |
---|
| 5 | * |
---|
[5c491aef] | 6 | * Author: Andrew Bray <andy@i-cubed.co.uk> |
---|
[6b45e470] | 7 | * |
---|
| 8 | * COPYRIGHT (c) 1995 by i-cubed ltd. |
---|
| 9 | * |
---|
| 10 | * To anyone who acknowledges that this file is provided "AS IS" |
---|
| 11 | * without any express or implied warranty: |
---|
| 12 | * permission to use, copy, modify, and distribute this file |
---|
| 13 | * for any purpose is hereby granted without fee, provided that |
---|
| 14 | * the above copyright notice and this notice appears in all |
---|
| 15 | * copies, and that the name of i-cubed limited not be used in |
---|
| 16 | * advertising or publicity pertaining to distribution of the |
---|
| 17 | * software without specific, written prior permission. |
---|
| 18 | * i-cubed limited makes no representations about the suitability |
---|
| 19 | * of this software for any purpose. |
---|
| 20 | * |
---|
| 21 | * Derived from c/src/exec/cpu/no_cpu/cpu.h: |
---|
| 22 | * |
---|
[60b791ad] | 23 | * COPYRIGHT (c) 1989-1998. |
---|
[6b45e470] | 24 | * On-Line Applications Research Corporation (OAR). |
---|
[03f2154e] | 25 | * Copyright assigned to U.S. Government, 1994. |
---|
[6b45e470] | 26 | * |
---|
[98e4ebf5] | 27 | * The license and distribution terms for this file may be |
---|
| 28 | * found in the file LICENSE in this distribution or at |
---|
[03f2154e] | 29 | * http://www.OARcorp.com/rtems/license.html. |
---|
[6b45e470] | 30 | * |
---|
[eb5a7e07] | 31 | * $Id$ |
---|
[6b45e470] | 32 | */ |
---|
| 33 | |
---|
| 34 | #ifndef __CPU_h |
---|
| 35 | #define __CPU_h |
---|
| 36 | |
---|
| 37 | #ifdef __cplusplus |
---|
| 38 | extern "C" { |
---|
| 39 | #endif |
---|
| 40 | |
---|
[5e9b32b] | 41 | #include <rtems/score/ppc.h> /* pick up machine definitions */ |
---|
[6b45e470] | 42 | #ifndef ASM |
---|
| 43 | struct CPU_Interrupt_frame; |
---|
| 44 | |
---|
[5e9b32b] | 45 | #include <rtems/score/ppctypes.h> |
---|
[6b45e470] | 46 | #endif |
---|
| 47 | |
---|
| 48 | /* conditional compilation parameters */ |
---|
| 49 | |
---|
| 50 | /* |
---|
| 51 | * Should the calls to _Thread_Enable_dispatch be inlined? |
---|
| 52 | * |
---|
| 53 | * If TRUE, then they are inlined. |
---|
| 54 | * If FALSE, then a subroutine call is made. |
---|
| 55 | * |
---|
| 56 | * Basically this is an example of the classic trade-off of size |
---|
| 57 | * versus speed. Inlining the call (TRUE) typically increases the |
---|
| 58 | * size of RTEMS while speeding up the enabling of dispatching. |
---|
| 59 | * [NOTE: In general, the _Thread_Dispatch_disable_level will |
---|
| 60 | * only be 0 or 1 unless you are in an interrupt handler and that |
---|
| 61 | * interrupt handler invokes the executive.] When not inlined |
---|
| 62 | * something calls _Thread_Enable_dispatch which in turns calls |
---|
| 63 | * _Thread_Dispatch. If the enable dispatch is inlined, then |
---|
| 64 | * one subroutine call is avoided entirely.] |
---|
| 65 | */ |
---|
| 66 | |
---|
| 67 | #define CPU_INLINE_ENABLE_DISPATCH FALSE |
---|
| 68 | |
---|
| 69 | /* |
---|
| 70 | * Should the body of the search loops in _Thread_queue_Enqueue_priority |
---|
| 71 | * be unrolled one time? In unrolled each iteration of the loop examines |
---|
| 72 | * two "nodes" on the chain being searched. Otherwise, only one node |
---|
| 73 | * is examined per iteration. |
---|
| 74 | * |
---|
| 75 | * If TRUE, then the loops are unrolled. |
---|
| 76 | * If FALSE, then the loops are not unrolled. |
---|
| 77 | * |
---|
| 78 | * The primary factor in making this decision is the cost of disabling |
---|
| 79 | * and enabling interrupts (_ISR_Flash) versus the cost of rest of the |
---|
| 80 | * body of the loop. On some CPUs, the flash is more expensive than |
---|
| 81 | * one iteration of the loop body. In this case, it might be desirable |
---|
| 82 | * to unroll the loop. It is important to note that on some CPUs, this |
---|
| 83 | * code is the longest interrupt disable period in RTEMS. So it is |
---|
| 84 | * necessary to strike a balance when setting this parameter. |
---|
| 85 | */ |
---|
| 86 | |
---|
| 87 | #define CPU_UNROLL_ENQUEUE_PRIORITY FALSE |
---|
| 88 | |
---|
| 89 | /* |
---|
| 90 | * Does RTEMS manage a dedicated interrupt stack in software? |
---|
| 91 | * |
---|
| 92 | * If TRUE, then a stack is allocated in _Interrupt_Manager_initialization. |
---|
| 93 | * If FALSE, nothing is done. |
---|
| 94 | * |
---|
| 95 | * If the CPU supports a dedicated interrupt stack in hardware, |
---|
| 96 | * then it is generally the responsibility of the BSP to allocate it |
---|
| 97 | * and set it up. |
---|
| 98 | * |
---|
| 99 | * If the CPU does not support a dedicated interrupt stack, then |
---|
| 100 | * the porter has two options: (1) execute interrupts on the |
---|
| 101 | * stack of the interrupted task, and (2) have RTEMS manage a dedicated |
---|
| 102 | * interrupt stack. |
---|
| 103 | * |
---|
| 104 | * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. |
---|
| 105 | * |
---|
| 106 | * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and |
---|
| 107 | * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is |
---|
| 108 | * possible that both are FALSE for a particular CPU. Although it |
---|
| 109 | * is unclear what that would imply about the interrupt processing |
---|
| 110 | * procedure on that CPU. |
---|
| 111 | */ |
---|
| 112 | |
---|
| 113 | #define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE |
---|
| 114 | |
---|
| 115 | /* |
---|
| 116 | * Does this CPU have hardware support for a dedicated interrupt stack? |
---|
| 117 | * |
---|
| 118 | * If TRUE, then it must be installed during initialization. |
---|
| 119 | * If FALSE, then no installation is performed. |
---|
| 120 | * |
---|
| 121 | * If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE. |
---|
| 122 | * |
---|
| 123 | * Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and |
---|
| 124 | * CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is |
---|
| 125 | * possible that both are FALSE for a particular CPU. Although it |
---|
| 126 | * is unclear what that would imply about the interrupt processing |
---|
| 127 | * procedure on that CPU. |
---|
| 128 | */ |
---|
| 129 | |
---|
| 130 | /* |
---|
| 131 | * ACB: This is a lie, but it gets us a handle on a call to set up |
---|
| 132 | * a variable derived from the top of the interrupt stack. |
---|
| 133 | */ |
---|
| 134 | |
---|
| 135 | #define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE |
---|
| 136 | |
---|
| 137 | /* |
---|
| 138 | * Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager? |
---|
| 139 | * |
---|
| 140 | * If TRUE, then the memory is allocated during initialization. |
---|
| 141 | * If FALSE, then the memory is allocated during initialization. |
---|
| 142 | * |
---|
| 143 | * This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE |
---|
| 144 | * or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE. |
---|
| 145 | */ |
---|
| 146 | |
---|
| 147 | #define CPU_ALLOCATE_INTERRUPT_STACK TRUE |
---|
| 148 | |
---|
| 149 | /* |
---|
| 150 | * Does the CPU have hardware floating point? |
---|
| 151 | * |
---|
| 152 | * If TRUE, then the RTEMS_FLOATING_POINT task attribute is supported. |
---|
| 153 | * If FALSE, then the RTEMS_FLOATING_POINT task attribute is ignored. |
---|
| 154 | * |
---|
| 155 | * If there is a FP coprocessor such as the i387 or mc68881, then |
---|
| 156 | * the answer is TRUE. |
---|
| 157 | * |
---|
| 158 | * The macro name "PPC_HAS_FPU" should be made CPU specific. |
---|
| 159 | * It indicates whether or not this CPU model has FP support. For |
---|
| 160 | * example, it would be possible to have an i386_nofp CPU model |
---|
| 161 | * which set this to false to indicate that you have an i386 without |
---|
| 162 | * an i387 and wish to leave floating point support out of RTEMS. |
---|
| 163 | */ |
---|
| 164 | |
---|
| 165 | #if ( PPC_HAS_FPU == 1 ) |
---|
| 166 | #define CPU_HARDWARE_FP TRUE |
---|
| 167 | #else |
---|
| 168 | #define CPU_HARDWARE_FP FALSE |
---|
| 169 | #endif |
---|
| 170 | |
---|
| 171 | /* |
---|
| 172 | * Are all tasks RTEMS_FLOATING_POINT tasks implicitly? |
---|
| 173 | * |
---|
| 174 | * If TRUE, then the RTEMS_FLOATING_POINT task attribute is assumed. |
---|
| 175 | * If FALSE, then the RTEMS_FLOATING_POINT task attribute is followed. |
---|
| 176 | * |
---|
| 177 | * So far, the only CPU in which this option has been used is the |
---|
| 178 | * HP PA-RISC. The HP C compiler and gcc both implicitly use the |
---|
| 179 | * floating point registers to perform integer multiplies. If |
---|
| 180 | * a function which you would not think utilize the FP unit DOES, |
---|
| 181 | * then one can not easily predict which tasks will use the FP hardware. |
---|
| 182 | * In this case, this option should be TRUE. |
---|
| 183 | * |
---|
| 184 | * If CPU_HARDWARE_FP is FALSE, then this should be FALSE as well. |
---|
| 185 | */ |
---|
| 186 | |
---|
| 187 | #define CPU_ALL_TASKS_ARE_FP FALSE |
---|
| 188 | |
---|
| 189 | /* |
---|
| 190 | * Should the IDLE task have a floating point context? |
---|
| 191 | * |
---|
| 192 | * If TRUE, then the IDLE task is created as a RTEMS_FLOATING_POINT task |
---|
| 193 | * and it has a floating point context which is switched in and out. |
---|
| 194 | * If FALSE, then the IDLE task does not have a floating point context. |
---|
| 195 | * |
---|
| 196 | * Setting this to TRUE negatively impacts the time required to preempt |
---|
| 197 | * the IDLE task from an interrupt because the floating point context |
---|
| 198 | * must be saved as part of the preemption. |
---|
| 199 | */ |
---|
| 200 | |
---|
| 201 | #define CPU_IDLE_TASK_IS_FP FALSE |
---|
| 202 | |
---|
| 203 | /* |
---|
| 204 | * Should the saving of the floating point registers be deferred |
---|
| 205 | * until a context switch is made to another different floating point |
---|
| 206 | * task? |
---|
| 207 | * |
---|
| 208 | * If TRUE, then the floating point context will not be stored until |
---|
| 209 | * necessary. It will remain in the floating point registers and not |
---|
| 210 | * disturned until another floating point task is switched to. |
---|
| 211 | * |
---|
| 212 | * If FALSE, then the floating point context is saved when a floating |
---|
| 213 | * point task is switched out and restored when the next floating point |
---|
| 214 | * task is restored. The state of the floating point registers between |
---|
| 215 | * those two operations is not specified. |
---|
| 216 | * |
---|
| 217 | * If the floating point context does NOT have to be saved as part of |
---|
| 218 | * interrupt dispatching, then it should be safe to set this to TRUE. |
---|
| 219 | * |
---|
| 220 | * Setting this flag to TRUE results in using a different algorithm |
---|
| 221 | * for deciding when to save and restore the floating point context. |
---|
| 222 | * The deferred FP switch algorithm minimizes the number of times |
---|
| 223 | * the FP context is saved and restored. The FP context is not saved |
---|
| 224 | * until a context switch is made to another, different FP task. |
---|
| 225 | * Thus in a system with only one FP task, the FP context will never |
---|
| 226 | * be saved or restored. |
---|
| 227 | */ |
---|
| 228 | /* |
---|
| 229 | * ACB Note: This could make debugging tricky.. |
---|
| 230 | */ |
---|
| 231 | |
---|
| 232 | #define CPU_USE_DEFERRED_FP_SWITCH TRUE |
---|
| 233 | |
---|
| 234 | /* |
---|
| 235 | * Does this port provide a CPU dependent IDLE task implementation? |
---|
| 236 | * |
---|
[75f09e5] | 237 | * If TRUE, then the routine _CPU_Thread_Idle_body |
---|
[6b45e470] | 238 | * must be provided and is the default IDLE thread body instead of |
---|
[75f09e5] | 239 | * _CPU_Thread_Idle_body. |
---|
[6b45e470] | 240 | * |
---|
| 241 | * If FALSE, then use the generic IDLE thread body if the BSP does |
---|
| 242 | * not provide one. |
---|
| 243 | * |
---|
| 244 | * This is intended to allow for supporting processors which have |
---|
| 245 | * a low power or idle mode. When the IDLE thread is executed, then |
---|
| 246 | * the CPU can be powered down. |
---|
| 247 | * |
---|
| 248 | * The order of precedence for selecting the IDLE thread body is: |
---|
| 249 | * |
---|
| 250 | * 1. BSP provided |
---|
| 251 | * 2. CPU dependent (if provided) |
---|
| 252 | * 3. generic (if no BSP and no CPU dependent) |
---|
| 253 | */ |
---|
| 254 | |
---|
| 255 | #define CPU_PROVIDES_IDLE_THREAD_BODY FALSE |
---|
| 256 | |
---|
| 257 | /* |
---|
| 258 | * Does the stack grow up (toward higher addresses) or down |
---|
| 259 | * (toward lower addresses)? |
---|
| 260 | * |
---|
| 261 | * If TRUE, then the grows upward. |
---|
| 262 | * If FALSE, then the grows toward smaller addresses. |
---|
| 263 | */ |
---|
| 264 | |
---|
| 265 | #define CPU_STACK_GROWS_UP FALSE |
---|
| 266 | |
---|
| 267 | /* |
---|
| 268 | * The following is the variable attribute used to force alignment |
---|
| 269 | * of critical RTEMS structures. On some processors it may make |
---|
| 270 | * sense to have these aligned on tighter boundaries than |
---|
| 271 | * the minimum requirements of the compiler in order to have as |
---|
| 272 | * much of the critical data area as possible in a cache line. |
---|
| 273 | * |
---|
| 274 | * The placement of this macro in the declaration of the variables |
---|
| 275 | * is based on the syntactically requirements of the GNU C |
---|
| 276 | * "__attribute__" extension. For example with GNU C, use |
---|
| 277 | * the following to force a structures to a 32 byte boundary. |
---|
| 278 | * |
---|
| 279 | * __attribute__ ((aligned (32))) |
---|
| 280 | * |
---|
| 281 | * NOTE: Currently only the Priority Bit Map table uses this feature. |
---|
| 282 | * To benefit from using this, the data must be heavily |
---|
| 283 | * used so it will stay in the cache and used frequently enough |
---|
| 284 | * in the executive to justify turning this on. |
---|
| 285 | */ |
---|
| 286 | |
---|
[e2d79559] | 287 | #define CPU_STRUCTURE_ALIGNMENT \ |
---|
| 288 | __attribute__ ((aligned (PPC_CACHE_ALIGNMENT))) |
---|
| 289 | |
---|
| 290 | /* |
---|
| 291 | * Define what is required to specify how the network to host conversion |
---|
| 292 | * routines are handled. |
---|
| 293 | */ |
---|
| 294 | |
---|
| 295 | #define CPU_CPU_HAS_OWN_HOST_TO_NETWORK_ROUTINES FALSE |
---|
| 296 | #define CPU_BIG_ENDIAN TRUE |
---|
| 297 | #define CPU_LITTLE_ENDIAN FALSE |
---|
[6b45e470] | 298 | |
---|
| 299 | /* |
---|
| 300 | * The following defines the number of bits actually used in the |
---|
| 301 | * interrupt field of the task mode. How those bits map to the |
---|
| 302 | * CPU interrupt levels is defined by the routine _CPU_ISR_Set_level(). |
---|
| 303 | */ |
---|
| 304 | /* |
---|
| 305 | * ACB Note: Levels are: |
---|
| 306 | * 0: All maskable interrupts enabled |
---|
| 307 | * 1: Other critical exceptions enabled |
---|
| 308 | * 2: Machine check enabled |
---|
| 309 | * 3: All maskable IRQs disabled |
---|
| 310 | */ |
---|
| 311 | |
---|
| 312 | #define CPU_MODES_INTERRUPT_MASK 0x00000003 |
---|
| 313 | |
---|
| 314 | /* |
---|
| 315 | * Processor defined structures |
---|
| 316 | * |
---|
| 317 | * Examples structures include the descriptor tables from the i386 |
---|
| 318 | * and the processor control structure on the i960ca. |
---|
| 319 | */ |
---|
| 320 | |
---|
| 321 | /* may need to put some structures here. */ |
---|
| 322 | |
---|
| 323 | /* |
---|
| 324 | * Contexts |
---|
| 325 | * |
---|
| 326 | * Generally there are 2 types of context to save. |
---|
| 327 | * 1. Interrupt registers to save |
---|
| 328 | * 2. Task level registers to save |
---|
| 329 | * |
---|
| 330 | * This means we have the following 3 context items: |
---|
| 331 | * 1. task level context stuff:: Context_Control |
---|
| 332 | * 2. floating point task stuff:: Context_Control_fp |
---|
| 333 | * 3. special interrupt level context :: Context_Control_interrupt |
---|
| 334 | * |
---|
| 335 | * On some processors, it is cost-effective to save only the callee |
---|
| 336 | * preserved registers during a task context switch. This means |
---|
| 337 | * that the ISR code needs to save those registers which do not |
---|
| 338 | * persist across function calls. It is not mandatory to make this |
---|
| 339 | * distinctions between the caller/callee saves registers for the |
---|
| 340 | * purpose of minimizing context saved during task switch and on interrupts. |
---|
| 341 | * If the cost of saving extra registers is minimal, simplicity is the |
---|
| 342 | * choice. Save the same context on interrupt entry as for tasks in |
---|
| 343 | * this case. |
---|
| 344 | * |
---|
| 345 | * Additionally, if gdb is to be made aware of RTEMS tasks for this CPU, then |
---|
| 346 | * care should be used in designing the context area. |
---|
| 347 | * |
---|
| 348 | * On some CPUs with hardware floating point support, the Context_Control_fp |
---|
| 349 | * structure will not be used or it simply consist of an array of a |
---|
| 350 | * fixed number of bytes. This is done when the floating point context |
---|
| 351 | * is dumped by a "FP save context" type instruction and the format |
---|
| 352 | * is not really defined by the CPU. In this case, there is no need |
---|
| 353 | * to figure out the exact format -- only the size. Of course, although |
---|
| 354 | * this is enough information for RTEMS, it is probably not enough for |
---|
| 355 | * a debugger such as gdb. But that is another problem. |
---|
| 356 | */ |
---|
| 357 | |
---|
| 358 | typedef struct { |
---|
| 359 | unsigned32 gpr1; /* Stack pointer for all */ |
---|
| 360 | unsigned32 gpr2; /* TOC in PowerOpen, reserved SVR4, section ptr EABI + */ |
---|
| 361 | unsigned32 gpr13; /* First non volatile PowerOpen, section ptr SVR4/EABI */ |
---|
| 362 | unsigned32 gpr14; /* Non volatile for all */ |
---|
| 363 | unsigned32 gpr15; /* Non volatile for all */ |
---|
| 364 | unsigned32 gpr16; /* Non volatile for all */ |
---|
| 365 | unsigned32 gpr17; /* Non volatile for all */ |
---|
| 366 | unsigned32 gpr18; /* Non volatile for all */ |
---|
| 367 | unsigned32 gpr19; /* Non volatile for all */ |
---|
| 368 | unsigned32 gpr20; /* Non volatile for all */ |
---|
| 369 | unsigned32 gpr21; /* Non volatile for all */ |
---|
| 370 | unsigned32 gpr22; /* Non volatile for all */ |
---|
| 371 | unsigned32 gpr23; /* Non volatile for all */ |
---|
| 372 | unsigned32 gpr24; /* Non volatile for all */ |
---|
| 373 | unsigned32 gpr25; /* Non volatile for all */ |
---|
| 374 | unsigned32 gpr26; /* Non volatile for all */ |
---|
| 375 | unsigned32 gpr27; /* Non volatile for all */ |
---|
| 376 | unsigned32 gpr28; /* Non volatile for all */ |
---|
| 377 | unsigned32 gpr29; /* Non volatile for all */ |
---|
| 378 | unsigned32 gpr30; /* Non volatile for all */ |
---|
| 379 | unsigned32 gpr31; /* Non volatile for all */ |
---|
| 380 | unsigned32 cr; /* PART of the CR is non volatile for all */ |
---|
| 381 | unsigned32 pc; /* Program counter/Link register */ |
---|
| 382 | unsigned32 msr; /* Initial interrupt level */ |
---|
| 383 | } Context_Control; |
---|
| 384 | |
---|
| 385 | typedef struct { |
---|
| 386 | /* The ABIs (PowerOpen/SVR4/EABI) only require saving f14-f31 over |
---|
| 387 | * procedure calls. However, this would mean that the interrupt |
---|
| 388 | * frame had to hold f0-f13, and the fpscr. And as the majority |
---|
| 389 | * of tasks will not have an FP context, we will save the whole |
---|
| 390 | * context here. |
---|
| 391 | */ |
---|
| 392 | #if (PPC_HAS_DOUBLE == 1) |
---|
| 393 | double f[32]; |
---|
| 394 | double fpscr; |
---|
| 395 | #else |
---|
| 396 | float f[32]; |
---|
| 397 | float fpscr; |
---|
| 398 | #endif |
---|
| 399 | } Context_Control_fp; |
---|
| 400 | |
---|
| 401 | typedef struct CPU_Interrupt_frame { |
---|
| 402 | unsigned32 stacklink; /* Ensure this is a real frame (also reg1 save) */ |
---|
| 403 | #if (PPC_ABI == PPC_ABI_POWEROPEN || PPC_ABI == PPC_ABI_GCC27) |
---|
| 404 | unsigned32 dummy[13]; /* Used by callees: PowerOpen ABI */ |
---|
| 405 | #else |
---|
| 406 | unsigned32 dummy[1]; /* Used by callees: SVR4/EABI */ |
---|
| 407 | #endif |
---|
| 408 | /* This is what is left out of the primary contexts */ |
---|
| 409 | unsigned32 gpr0; |
---|
| 410 | unsigned32 gpr2; /* play safe */ |
---|
| 411 | unsigned32 gpr3; |
---|
| 412 | unsigned32 gpr4; |
---|
| 413 | unsigned32 gpr5; |
---|
| 414 | unsigned32 gpr6; |
---|
| 415 | unsigned32 gpr7; |
---|
| 416 | unsigned32 gpr8; |
---|
| 417 | unsigned32 gpr9; |
---|
| 418 | unsigned32 gpr10; |
---|
| 419 | unsigned32 gpr11; |
---|
| 420 | unsigned32 gpr12; |
---|
| 421 | unsigned32 gpr13; /* Play safe */ |
---|
| 422 | unsigned32 gpr28; /* For internal use by the IRQ handler */ |
---|
| 423 | unsigned32 gpr29; /* For internal use by the IRQ handler */ |
---|
| 424 | unsigned32 gpr30; /* For internal use by the IRQ handler */ |
---|
| 425 | unsigned32 gpr31; /* For internal use by the IRQ handler */ |
---|
| 426 | unsigned32 cr; /* Bits of this are volatile, so no-one may save */ |
---|
| 427 | unsigned32 ctr; |
---|
| 428 | unsigned32 xer; |
---|
| 429 | unsigned32 lr; |
---|
| 430 | unsigned32 pc; |
---|
| 431 | unsigned32 msr; |
---|
| 432 | unsigned32 pad[3]; |
---|
| 433 | } CPU_Interrupt_frame; |
---|
| 434 | |
---|
| 435 | |
---|
| 436 | /* |
---|
| 437 | * The following table contains the information required to configure |
---|
| 438 | * the PowerPC processor specific parameters. |
---|
| 439 | */ |
---|
| 440 | |
---|
| 441 | typedef struct { |
---|
| 442 | void (*pretasking_hook)( void ); |
---|
| 443 | void (*predriver_hook)( void ); |
---|
| 444 | void (*postdriver_hook)( void ); |
---|
| 445 | void (*idle_task)( void ); |
---|
| 446 | boolean do_zero_of_workspace; |
---|
| 447 | unsigned32 interrupt_stack_size; |
---|
[75f09e5] | 448 | unsigned32 extra_mpci_receive_server_stack; |
---|
[96981e3a] | 449 | void * (*stack_allocate_hook)( unsigned32 ); |
---|
| 450 | void (*stack_free_hook)( void* ); |
---|
| 451 | /* end of fields required on all CPUs */ |
---|
| 452 | |
---|
[6b45e470] | 453 | unsigned32 clicks_per_usec; /* Timer clicks per microsecond */ |
---|
| 454 | unsigned32 serial_per_sec; /* Serial clocks per second */ |
---|
| 455 | boolean serial_external_clock; |
---|
| 456 | boolean serial_xon_xoff; |
---|
| 457 | boolean serial_cts_rts; |
---|
| 458 | unsigned32 serial_rate; |
---|
| 459 | unsigned32 timer_average_overhead; /* Average overhead of timer in ticks */ |
---|
| 460 | unsigned32 timer_least_valid; /* Least valid number from timer */ |
---|
| 461 | void (*spurious_handler)(unsigned32 vector, CPU_Interrupt_frame *); |
---|
| 462 | } rtems_cpu_table; |
---|
| 463 | |
---|
| 464 | /* |
---|
| 465 | * This variable is optional. It is used on CPUs on which it is difficult |
---|
| 466 | * to generate an "uninitialized" FP context. It is filled in by |
---|
| 467 | * _CPU_Initialize and copied into the task's FP context area during |
---|
| 468 | * _CPU_Context_Initialize. |
---|
| 469 | */ |
---|
| 470 | |
---|
| 471 | /* EXTERN Context_Control_fp _CPU_Null_fp_context; */ |
---|
| 472 | |
---|
| 473 | /* |
---|
| 474 | * On some CPUs, RTEMS supports a software managed interrupt stack. |
---|
| 475 | * This stack is allocated by the Interrupt Manager and the switch |
---|
| 476 | * is performed in _ISR_Handler. These variables contain pointers |
---|
| 477 | * to the lowest and highest addresses in the chunk of memory allocated |
---|
| 478 | * for the interrupt stack. Since it is unknown whether the stack |
---|
| 479 | * grows up or down (in general), this give the CPU dependent |
---|
| 480 | * code the option of picking the version it wants to use. |
---|
| 481 | * |
---|
| 482 | * NOTE: These two variables are required if the macro |
---|
| 483 | * CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE. |
---|
| 484 | */ |
---|
| 485 | |
---|
[c627b2a3] | 486 | SCORE_EXTERN void *_CPU_Interrupt_stack_low; |
---|
| 487 | SCORE_EXTERN void *_CPU_Interrupt_stack_high; |
---|
[6b45e470] | 488 | |
---|
| 489 | /* |
---|
| 490 | * With some compilation systems, it is difficult if not impossible to |
---|
| 491 | * call a high-level language routine from assembly language. This |
---|
| 492 | * is especially true of commercial Ada compilers and name mangling |
---|
| 493 | * C++ ones. This variable can be optionally defined by the CPU porter |
---|
| 494 | * and contains the address of the routine _Thread_Dispatch. This |
---|
| 495 | * can make it easier to invoke that routine at the end of the interrupt |
---|
| 496 | * sequence (if a dispatch is necessary). |
---|
| 497 | */ |
---|
| 498 | |
---|
| 499 | /* EXTERN void (*_CPU_Thread_dispatch_pointer)(); */ |
---|
| 500 | |
---|
| 501 | /* |
---|
| 502 | * Nothing prevents the porter from declaring more CPU specific variables. |
---|
| 503 | */ |
---|
| 504 | |
---|
[c627b2a3] | 505 | SCORE_EXTERN struct { |
---|
[5c491aef] | 506 | unsigned32 *Nest_level; |
---|
| 507 | unsigned32 *Disable_level; |
---|
| 508 | void *Vector_table; |
---|
| 509 | void *Stack; |
---|
[6b45e470] | 510 | #if (PPC_ABI == PPC_ABI_POWEROPEN) |
---|
| 511 | unsigned32 Dispatch_r2; |
---|
| 512 | #else |
---|
| 513 | unsigned32 Default_r2; |
---|
| 514 | #if (PPC_ABI != PPC_ABI_GCC27) |
---|
| 515 | unsigned32 Default_r13; |
---|
| 516 | #endif |
---|
| 517 | #endif |
---|
[424ab48] | 518 | volatile boolean *Switch_necessary; |
---|
[6b45e470] | 519 | boolean *Signal; |
---|
| 520 | } _CPU_IRQ_info CPU_STRUCTURE_ALIGNMENT; |
---|
| 521 | |
---|
| 522 | /* |
---|
| 523 | * The size of the floating point context area. On some CPUs this |
---|
| 524 | * will not be a "sizeof" because the format of the floating point |
---|
| 525 | * area is not defined -- only the size is. This is usually on |
---|
| 526 | * CPUs with a "floating point save context" instruction. |
---|
| 527 | */ |
---|
| 528 | |
---|
| 529 | #define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp ) |
---|
| 530 | |
---|
| 531 | /* |
---|
| 532 | * (Optional) # of bytes for libmisc/stackchk to check |
---|
| 533 | * If not specifed, then it defaults to something reasonable |
---|
| 534 | * for most architectures. |
---|
| 535 | */ |
---|
| 536 | |
---|
| 537 | #define CPU_STACK_CHECK_SIZE (128) |
---|
| 538 | |
---|
| 539 | /* |
---|
| 540 | * Amount of extra stack (above minimum stack size) required by |
---|
[75f09e5] | 541 | * MPCI receive server thread. Remember that in a multiprocessor |
---|
| 542 | * system this thread must exist and be able to process all directives. |
---|
[6b45e470] | 543 | */ |
---|
| 544 | |
---|
[75f09e5] | 545 | #define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0 |
---|
[6b45e470] | 546 | |
---|
| 547 | /* |
---|
| 548 | * This defines the number of entries in the ISR_Vector_table managed |
---|
| 549 | * by RTEMS. |
---|
| 550 | */ |
---|
| 551 | |
---|
[5c491aef] | 552 | #define CPU_INTERRUPT_NUMBER_OF_VECTORS (PPC_INTERRUPT_MAX) |
---|
[9700578] | 553 | #define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (CPU_INTERRUPT_NUMBER_OF_VECTORS - 1) |
---|
[6b45e470] | 554 | |
---|
| 555 | /* |
---|
| 556 | * Should be large enough to run all RTEMS tests. This insures |
---|
| 557 | * that a "reasonable" small application should not have any problems. |
---|
| 558 | */ |
---|
| 559 | |
---|
| 560 | #define CPU_STACK_MINIMUM_SIZE (1024*3) |
---|
| 561 | |
---|
| 562 | /* |
---|
| 563 | * CPU's worst alignment requirement for data types on a byte boundary. This |
---|
| 564 | * alignment does not take into account the requirements for the stack. |
---|
| 565 | */ |
---|
| 566 | |
---|
| 567 | #define CPU_ALIGNMENT (PPC_ALIGNMENT) |
---|
| 568 | |
---|
| 569 | /* |
---|
| 570 | * This number corresponds to the byte alignment requirement for the |
---|
| 571 | * heap handler. This alignment requirement may be stricter than that |
---|
| 572 | * for the data types alignment specified by CPU_ALIGNMENT. It is |
---|
| 573 | * common for the heap to follow the same alignment requirement as |
---|
| 574 | * CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict enough for the heap, |
---|
| 575 | * then this should be set to CPU_ALIGNMENT. |
---|
| 576 | * |
---|
| 577 | * NOTE: This does not have to be a power of 2. It does have to |
---|
| 578 | * be greater or equal to than CPU_ALIGNMENT. |
---|
| 579 | */ |
---|
| 580 | |
---|
[5c491aef] | 581 | #define CPU_HEAP_ALIGNMENT (PPC_ALIGNMENT) |
---|
[6b45e470] | 582 | |
---|
| 583 | /* |
---|
| 584 | * This number corresponds to the byte alignment requirement for memory |
---|
| 585 | * buffers allocated by the partition manager. This alignment requirement |
---|
| 586 | * may be stricter than that for the data types alignment specified by |
---|
| 587 | * CPU_ALIGNMENT. It is common for the partition to follow the same |
---|
| 588 | * alignment requirement as CPU_ALIGNMENT. If the CPU_ALIGNMENT is strict |
---|
| 589 | * enough for the partition, then this should be set to CPU_ALIGNMENT. |
---|
| 590 | * |
---|
| 591 | * NOTE: This does not have to be a power of 2. It does have to |
---|
| 592 | * be greater or equal to than CPU_ALIGNMENT. |
---|
| 593 | */ |
---|
| 594 | |
---|
[5c491aef] | 595 | #define CPU_PARTITION_ALIGNMENT (PPC_ALIGNMENT) |
---|
[6b45e470] | 596 | |
---|
| 597 | /* |
---|
| 598 | * This number corresponds to the byte alignment requirement for the |
---|
| 599 | * stack. This alignment requirement may be stricter than that for the |
---|
| 600 | * data types alignment specified by CPU_ALIGNMENT. If the CPU_ALIGNMENT |
---|
| 601 | * is strict enough for the stack, then this should be set to 0. |
---|
| 602 | * |
---|
| 603 | * NOTE: This must be a power of 2 either 0 or greater than CPU_ALIGNMENT. |
---|
| 604 | */ |
---|
| 605 | |
---|
| 606 | #define CPU_STACK_ALIGNMENT (PPC_STACK_ALIGNMENT) |
---|
| 607 | |
---|
| 608 | /* ISR handler macros */ |
---|
| 609 | |
---|
| 610 | /* |
---|
| 611 | * Disable all interrupts for an RTEMS critical section. The previous |
---|
| 612 | * level is returned in _level. |
---|
| 613 | */ |
---|
| 614 | |
---|
[5c491aef] | 615 | #define loc_string(a,b) a " (" #b ")\n" |
---|
| 616 | |
---|
[6b45e470] | 617 | #define _CPU_ISR_Disable( _isr_cookie ) \ |
---|
| 618 | { \ |
---|
| 619 | asm volatile ( \ |
---|
| 620 | "mfmsr %0; andc %1,%0,%1; mtmsr %1" : \ |
---|
[72b397a] | 621 | "=&r" ((_isr_cookie)) : "r" ((PPC_MSR_DISABLE_MASK)) \ |
---|
[6b45e470] | 622 | ); \ |
---|
| 623 | } |
---|
| 624 | |
---|
| 625 | /* |
---|
| 626 | * Enable interrupts to the previous level (returned by _CPU_ISR_Disable). |
---|
| 627 | * This indicates the end of an RTEMS critical section. The parameter |
---|
| 628 | * _level is not modified. |
---|
| 629 | */ |
---|
| 630 | |
---|
| 631 | #define _CPU_ISR_Enable( _isr_cookie ) \ |
---|
| 632 | { \ |
---|
| 633 | asm volatile ( "mtmsr %0" : \ |
---|
[72b397a] | 634 | "=&r" ((_isr_cookie)) : "0" ((_isr_cookie))); \ |
---|
[6b45e470] | 635 | } |
---|
| 636 | |
---|
| 637 | /* |
---|
| 638 | * This temporarily restores the interrupt to _level before immediately |
---|
| 639 | * disabling them again. This is used to divide long RTEMS critical |
---|
| 640 | * sections into two or more parts. The parameter _level is not |
---|
| 641 | * modified. |
---|
| 642 | */ |
---|
| 643 | |
---|
| 644 | #define _CPU_ISR_Flash( _isr_cookie ) \ |
---|
| 645 | { \ |
---|
| 646 | asm volatile ( \ |
---|
| 647 | "mtmsr %0; andc %1,%0,%1; mtmsr %1" : \ |
---|
| 648 | "=r" ((_isr_cookie)) : \ |
---|
| 649 | "r" ((PPC_MSR_DISABLE_MASK)), "0" ((_isr_cookie)) \ |
---|
| 650 | ); \ |
---|
| 651 | } |
---|
| 652 | |
---|
| 653 | /* |
---|
| 654 | * Map interrupt level in task mode onto the hardware that the CPU |
---|
| 655 | * actually provides. Currently, interrupt levels which do not |
---|
| 656 | * map onto the CPU in a generic fashion are undefined. Someday, |
---|
| 657 | * it would be nice if these were "mapped" by the application |
---|
| 658 | * via a callout. For example, m68k has 8 levels 0 - 7, levels |
---|
| 659 | * 8 - 255 would be available for bsp/application specific meaning. |
---|
| 660 | * This could be used to manage a programmable interrupt controller |
---|
| 661 | * via the rtems_task_mode directive. |
---|
| 662 | */ |
---|
| 663 | |
---|
| 664 | #define _CPU_ISR_Set_level( new_level ) \ |
---|
| 665 | { \ |
---|
[424ab48] | 666 | register unsigned32 tmp = 0; \ |
---|
[6b45e470] | 667 | asm volatile ( \ |
---|
| 668 | "mfmsr %0; andc %0,%0,%1; and %2, %2, %1; or %0, %0, %2; mtmsr %0" : \ |
---|
| 669 | "=r" ((tmp)) : \ |
---|
| 670 | "r" ((PPC_MSR_DISABLE_MASK)), "r" ((_CPU_msrs[new_level])), "0" ((tmp)) \ |
---|
| 671 | ); \ |
---|
| 672 | } |
---|
| 673 | |
---|
[5c491aef] | 674 | unsigned32 _CPU_ISR_Get_level( void ); |
---|
| 675 | |
---|
[6b45e470] | 676 | /* end of ISR handler macros */ |
---|
| 677 | |
---|
| 678 | /* Context handler macros */ |
---|
| 679 | |
---|
| 680 | /* |
---|
| 681 | * Initialize the context to a state suitable for starting a |
---|
| 682 | * task after a context restore operation. Generally, this |
---|
| 683 | * involves: |
---|
| 684 | * |
---|
| 685 | * - setting a starting address |
---|
| 686 | * - preparing the stack |
---|
| 687 | * - preparing the stack and frame pointers |
---|
| 688 | * - setting the proper interrupt level in the context |
---|
| 689 | * - initializing the floating point context |
---|
| 690 | * |
---|
| 691 | * This routine generally does not set any unnecessary register |
---|
| 692 | * in the context. The state of the "general data" registers is |
---|
| 693 | * undefined at task start time. |
---|
| 694 | */ |
---|
| 695 | |
---|
| 696 | #if PPC_ABI == PPC_ABI_POWEROPEN |
---|
| 697 | #define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ |
---|
[9700578] | 698 | _isr, _entry_point, _is_fp ) \ |
---|
[6b45e470] | 699 | { \ |
---|
| 700 | unsigned32 sp, *desc; \ |
---|
| 701 | \ |
---|
| 702 | sp = ((unsigned32)_stack_base) + (_size) - 56; \ |
---|
| 703 | *((unsigned32 *)sp) = 0; \ |
---|
| 704 | \ |
---|
| 705 | desc = (unsigned32 *)_entry_point; \ |
---|
| 706 | \ |
---|
| 707 | (_the_context)->msr = PPC_MSR_INITIAL | \ |
---|
| 708 | _CPU_msrs[ _isr ]; \ |
---|
| 709 | (_the_context)->pc = desc[0]; \ |
---|
| 710 | (_the_context)->gpr1 = sp; \ |
---|
| 711 | (_the_context)->gpr2 = desc[1]; \ |
---|
| 712 | } |
---|
| 713 | #endif |
---|
| 714 | #if PPC_ABI == PPC_ABI_SVR4 |
---|
| 715 | #define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ |
---|
| 716 | _isr, _entry_point ) \ |
---|
| 717 | { \ |
---|
| 718 | unsigned32 sp, r13; \ |
---|
| 719 | \ |
---|
| 720 | sp = ((unsigned32)_stack_base) + (_size) - 8; \ |
---|
| 721 | *((unsigned32 *)sp) = 0; \ |
---|
| 722 | \ |
---|
| 723 | asm volatile ("mr %0, 13" : "=r" ((r13))); \ |
---|
| 724 | \ |
---|
| 725 | (_the_context->msr) = PPC_MSR_INITIAL | \ |
---|
| 726 | _CPU_msrs[ _isr ]; \ |
---|
| 727 | (_the_context->pc) = _entry_point; \ |
---|
| 728 | (_the_context->gpr1) = sp; \ |
---|
| 729 | (_the_context->gpr13) = r13; \ |
---|
| 730 | } |
---|
| 731 | #endif |
---|
| 732 | #if PPC_ABI == PPC_ABI_EABI |
---|
| 733 | #define _CPU_Context_Initialize( _the_context, _stack_base, _size, \ |
---|
| 734 | _isr, _entry_point ) \ |
---|
| 735 | { \ |
---|
| 736 | unsigned32 sp, r2, r13; \ |
---|
| 737 | \ |
---|
| 738 | sp = ((unsigned32)_stack_base) + (_size) - 8; \ |
---|
| 739 | *((unsigned32 *)sp) = 0; \ |
---|
| 740 | \ |
---|
| 741 | asm volatile ("mr %0,2; mr %1,13" : "=r" ((r2)), "=r" ((r13))); \ |
---|
| 742 | \ |
---|
| 743 | (_the_context)->msr = PPC_MSR_INITIAL | \ |
---|
| 744 | _CPU_msrs[ _isr ]; \ |
---|
| 745 | (_the_context->pc) = _entry_point; \ |
---|
| 746 | (_the_context->gpr1) = sp; \ |
---|
| 747 | (_the_context->gpr2) = r2; \ |
---|
| 748 | (_the_context->gpr13) = r13; \ |
---|
| 749 | } |
---|
| 750 | #endif |
---|
| 751 | |
---|
| 752 | /* |
---|
| 753 | * This routine is responsible for somehow restarting the currently |
---|
| 754 | * executing task. If you are lucky, then all that is necessary |
---|
| 755 | * is restoring the context. Otherwise, there will need to be |
---|
| 756 | * a special assembly routine which does something special in this |
---|
| 757 | * case. Context_Restore should work most of the time. It will |
---|
| 758 | * not work if restarting self conflicts with the stack frame |
---|
| 759 | * assumptions of restoring a context. |
---|
| 760 | */ |
---|
| 761 | |
---|
| 762 | #define _CPU_Context_Restart_self( _the_context ) \ |
---|
| 763 | _CPU_Context_restore( (_the_context) ); |
---|
| 764 | |
---|
| 765 | /* |
---|
| 766 | * The purpose of this macro is to allow the initial pointer into |
---|
| 767 | * a floating point context area (used to save the floating point |
---|
| 768 | * context) to be at an arbitrary place in the floating point |
---|
| 769 | * context area. |
---|
| 770 | * |
---|
| 771 | * This is necessary because some FP units are designed to have |
---|
| 772 | * their context saved as a stack which grows into lower addresses. |
---|
| 773 | * Other FP units can be saved by simply moving registers into offsets |
---|
| 774 | * from the base of the context area. Finally some FP units provide |
---|
| 775 | * a "dump context" instruction which could fill in from high to low |
---|
| 776 | * or low to high based on the whim of the CPU designers. |
---|
| 777 | */ |
---|
| 778 | |
---|
| 779 | #define _CPU_Context_Fp_start( _base, _offset ) \ |
---|
[2069773] | 780 | ( (void *) _Addresses_Add_offset( (_base), (_offset) ) ) |
---|
[6b45e470] | 781 | |
---|
| 782 | /* |
---|
| 783 | * This routine initializes the FP context area passed to it to. |
---|
| 784 | * There are a few standard ways in which to initialize the |
---|
| 785 | * floating point context. The code included for this macro assumes |
---|
| 786 | * that this is a CPU in which a "initial" FP context was saved into |
---|
| 787 | * _CPU_Null_fp_context and it simply copies it to the destination |
---|
| 788 | * context passed to it. |
---|
| 789 | * |
---|
| 790 | * Other models include (1) not doing anything, and (2) putting |
---|
| 791 | * a "null FP status word" in the correct place in the FP context. |
---|
| 792 | */ |
---|
| 793 | |
---|
| 794 | #define _CPU_Context_Initialize_fp( _destination ) \ |
---|
| 795 | { \ |
---|
| 796 | ((Context_Control_fp *) *((void **) _destination))->fpscr = PPC_INIT_FPSCR; \ |
---|
| 797 | } |
---|
| 798 | |
---|
| 799 | /* end of Context handler macros */ |
---|
| 800 | |
---|
| 801 | /* Fatal Error manager macros */ |
---|
| 802 | |
---|
| 803 | /* |
---|
| 804 | * This routine copies _error into a known place -- typically a stack |
---|
| 805 | * location or a register, optionally disables interrupts, and |
---|
| 806 | * halts/stops the CPU. |
---|
| 807 | */ |
---|
| 808 | |
---|
| 809 | #define _CPU_Fatal_halt( _error ) \ |
---|
| 810 | _CPU_Fatal_error(_error) |
---|
| 811 | |
---|
| 812 | /* end of Fatal Error manager macros */ |
---|
| 813 | |
---|
| 814 | /* Bitfield handler macros */ |
---|
| 815 | |
---|
| 816 | /* |
---|
| 817 | * This routine sets _output to the bit number of the first bit |
---|
| 818 | * set in _value. _value is of CPU dependent type Priority_Bit_map_control. |
---|
| 819 | * This type may be either 16 or 32 bits wide although only the 16 |
---|
| 820 | * least significant bits will be used. |
---|
| 821 | * |
---|
| 822 | * There are a number of variables in using a "find first bit" type |
---|
| 823 | * instruction. |
---|
| 824 | * |
---|
| 825 | * (1) What happens when run on a value of zero? |
---|
| 826 | * (2) Bits may be numbered from MSB to LSB or vice-versa. |
---|
| 827 | * (3) The numbering may be zero or one based. |
---|
| 828 | * (4) The "find first bit" instruction may search from MSB or LSB. |
---|
| 829 | * |
---|
| 830 | * RTEMS guarantees that (1) will never happen so it is not a concern. |
---|
| 831 | * (2),(3), (4) are handled by the macros _CPU_Priority_mask() and |
---|
[5c491aef] | 832 | * _CPU_Priority_Bits_index(). These three form a set of routines |
---|
[6b45e470] | 833 | * which must logically operate together. Bits in the _value are |
---|
| 834 | * set and cleared based on masks built by _CPU_Priority_mask(). |
---|
| 835 | * The basic major and minor values calculated by _Priority_Major() |
---|
[5c491aef] | 836 | * and _Priority_Minor() are "massaged" by _CPU_Priority_Bits_index() |
---|
[6b45e470] | 837 | * to properly range between the values returned by the "find first bit" |
---|
| 838 | * instruction. This makes it possible for _Priority_Get_highest() to |
---|
| 839 | * calculate the major and directly index into the minor table. |
---|
| 840 | * This mapping is necessary to ensure that 0 (a high priority major/minor) |
---|
| 841 | * is the first bit found. |
---|
| 842 | * |
---|
| 843 | * This entire "find first bit" and mapping process depends heavily |
---|
| 844 | * on the manner in which a priority is broken into a major and minor |
---|
| 845 | * components with the major being the 4 MSB of a priority and minor |
---|
| 846 | * the 4 LSB. Thus (0 << 4) + 0 corresponds to priority 0 -- the highest |
---|
| 847 | * priority. And (15 << 4) + 14 corresponds to priority 254 -- the next |
---|
| 848 | * to the lowest priority. |
---|
| 849 | * |
---|
| 850 | * If your CPU does not have a "find first bit" instruction, then |
---|
| 851 | * there are ways to make do without it. Here are a handful of ways |
---|
| 852 | * to implement this in software: |
---|
| 853 | * |
---|
| 854 | * - a series of 16 bit test instructions |
---|
| 855 | * - a "binary search using if's" |
---|
| 856 | * - _number = 0 |
---|
| 857 | * if _value > 0x00ff |
---|
| 858 | * _value >>=8 |
---|
| 859 | * _number = 8; |
---|
| 860 | * |
---|
| 861 | * if _value > 0x0000f |
---|
| 862 | * _value >=8 |
---|
| 863 | * _number += 4 |
---|
| 864 | * |
---|
| 865 | * _number += bit_set_table[ _value ] |
---|
| 866 | * |
---|
| 867 | * where bit_set_table[ 16 ] has values which indicate the first |
---|
| 868 | * bit set |
---|
| 869 | */ |
---|
| 870 | |
---|
| 871 | #define _CPU_Bitfield_Find_first_bit( _value, _output ) \ |
---|
| 872 | { \ |
---|
| 873 | asm volatile ("cntlzw %0, %1" : "=r" ((_output)), "=r" ((_value)) : \ |
---|
| 874 | "1" ((_value))); \ |
---|
| 875 | } |
---|
| 876 | |
---|
| 877 | /* end of Bitfield handler macros */ |
---|
| 878 | |
---|
| 879 | /* |
---|
| 880 | * This routine builds the mask which corresponds to the bit fields |
---|
| 881 | * as searched by _CPU_Bitfield_Find_first_bit(). See the discussion |
---|
| 882 | * for that routine. |
---|
| 883 | */ |
---|
| 884 | |
---|
| 885 | #define _CPU_Priority_Mask( _bit_number ) \ |
---|
| 886 | ( 0x80000000 >> (_bit_number) ) |
---|
| 887 | |
---|
| 888 | /* |
---|
| 889 | * This routine translates the bit numbers returned by |
---|
| 890 | * _CPU_Bitfield_Find_first_bit() into something suitable for use as |
---|
| 891 | * a major or minor component of a priority. See the discussion |
---|
| 892 | * for that routine. |
---|
| 893 | */ |
---|
| 894 | |
---|
[9700578] | 895 | #define _CPU_Priority_bits_index( _priority ) \ |
---|
[6b45e470] | 896 | (_priority) |
---|
| 897 | |
---|
| 898 | /* end of Priority handler macros */ |
---|
| 899 | |
---|
| 900 | /* variables */ |
---|
| 901 | |
---|
| 902 | extern const unsigned32 _CPU_msrs[4]; |
---|
| 903 | |
---|
| 904 | /* functions */ |
---|
| 905 | |
---|
| 906 | /* |
---|
| 907 | * _CPU_Initialize |
---|
| 908 | * |
---|
| 909 | * This routine performs CPU dependent initialization. |
---|
| 910 | */ |
---|
| 911 | |
---|
| 912 | void _CPU_Initialize( |
---|
| 913 | rtems_cpu_table *cpu_table, |
---|
| 914 | void (*thread_dispatch) |
---|
| 915 | ); |
---|
| 916 | |
---|
| 917 | /* |
---|
| 918 | * _CPU_ISR_install_vector |
---|
| 919 | * |
---|
| 920 | * This routine installs an interrupt vector. |
---|
| 921 | */ |
---|
| 922 | |
---|
| 923 | void _CPU_ISR_install_vector( |
---|
| 924 | unsigned32 vector, |
---|
| 925 | proc_ptr new_handler, |
---|
| 926 | proc_ptr *old_handler |
---|
| 927 | ); |
---|
| 928 | |
---|
| 929 | /* |
---|
| 930 | * _CPU_Install_interrupt_stack |
---|
| 931 | * |
---|
| 932 | * This routine installs the hardware interrupt stack pointer. |
---|
| 933 | * |
---|
| 934 | * NOTE: It need only be provided if CPU_HAS_HARDWARE_INTERRUPT_STACK |
---|
| 935 | * is TRUE. |
---|
| 936 | */ |
---|
| 937 | |
---|
| 938 | void _CPU_Install_interrupt_stack( void ); |
---|
| 939 | |
---|
| 940 | /* |
---|
| 941 | * _CPU_Context_switch |
---|
| 942 | * |
---|
| 943 | * This routine switches from the run context to the heir context. |
---|
| 944 | */ |
---|
| 945 | |
---|
| 946 | void _CPU_Context_switch( |
---|
| 947 | Context_Control *run, |
---|
| 948 | Context_Control *heir |
---|
| 949 | ); |
---|
| 950 | |
---|
| 951 | /* |
---|
| 952 | * _CPU_Context_restore |
---|
| 953 | * |
---|
[77ea27fc] | 954 | * This routine is generally used only to restart self in an |
---|
[6b45e470] | 955 | * efficient manner. It may simply be a label in _CPU_Context_switch. |
---|
| 956 | * |
---|
| 957 | * NOTE: May be unnecessary to reload some registers. |
---|
| 958 | */ |
---|
| 959 | |
---|
| 960 | void _CPU_Context_restore( |
---|
| 961 | Context_Control *new_context |
---|
| 962 | ); |
---|
| 963 | |
---|
| 964 | /* |
---|
| 965 | * _CPU_Context_save_fp |
---|
| 966 | * |
---|
| 967 | * This routine saves the floating point context passed to it. |
---|
| 968 | */ |
---|
| 969 | |
---|
| 970 | void _CPU_Context_save_fp( |
---|
| 971 | void **fp_context_ptr |
---|
| 972 | ); |
---|
| 973 | |
---|
| 974 | /* |
---|
| 975 | * _CPU_Context_restore_fp |
---|
| 976 | * |
---|
| 977 | * This routine restores the floating point context passed to it. |
---|
| 978 | */ |
---|
| 979 | |
---|
| 980 | void _CPU_Context_restore_fp( |
---|
| 981 | void **fp_context_ptr |
---|
| 982 | ); |
---|
| 983 | |
---|
| 984 | void _CPU_Fatal_error( |
---|
| 985 | unsigned32 _error |
---|
| 986 | ); |
---|
| 987 | |
---|
| 988 | /* The following routine swaps the endian format of an unsigned int. |
---|
| 989 | * It must be static because it is referenced indirectly. |
---|
| 990 | * |
---|
| 991 | * This version will work on any processor, but if there is a better |
---|
| 992 | * way for your CPU PLEASE use it. The most common way to do this is to: |
---|
| 993 | * |
---|
| 994 | * swap least significant two bytes with 16-bit rotate |
---|
| 995 | * swap upper and lower 16-bits |
---|
| 996 | * swap most significant two bytes with 16-bit rotate |
---|
| 997 | * |
---|
| 998 | * Some CPUs have special instructions which swap a 32-bit quantity in |
---|
| 999 | * a single instruction (e.g. i486). It is probably best to avoid |
---|
| 1000 | * an "endian swapping control bit" in the CPU. One good reason is |
---|
| 1001 | * that interrupts would probably have to be disabled to insure that |
---|
| 1002 | * an interrupt does not try to access the same "chunk" with the wrong |
---|
| 1003 | * endian. Another good reason is that on some CPUs, the endian bit |
---|
| 1004 | * endianness for ALL fetches -- both code and data -- so the code |
---|
| 1005 | * will be fetched incorrectly. |
---|
| 1006 | */ |
---|
| 1007 | |
---|
| 1008 | static inline unsigned int CPU_swap_u32( |
---|
| 1009 | unsigned int value |
---|
| 1010 | ) |
---|
| 1011 | { |
---|
| 1012 | unsigned32 swapped; |
---|
| 1013 | |
---|
| 1014 | asm volatile("rlwimi %0,%1,8,24,31;" |
---|
| 1015 | "rlwimi %0,%1,24,16,23;" |
---|
| 1016 | "rlwimi %0,%1,8,8,15;" |
---|
| 1017 | "rlwimi %0,%1,24,0,7;" : |
---|
[72b397a] | 1018 | "=&r" ((swapped)) : "r" ((value))); |
---|
[6b45e470] | 1019 | |
---|
| 1020 | return( swapped ); |
---|
| 1021 | } |
---|
| 1022 | |
---|
| 1023 | #ifdef __cplusplus |
---|
| 1024 | } |
---|
| 1025 | #endif |
---|
| 1026 | |
---|
| 1027 | #endif |
---|