source: rtems/c/src/exec/score/cpu/m68k/cpu_asm.s @ ac7d5ef0

/*  cpu_asm.s
 *
 *  This file contains all assembly code for the MC68020 implementation
 *  of RTEMS.
 *
 *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
 *  On-Line Applications Research Corporation (OAR).
 *  All rights assigned to U.S. Government, 1994.
 *
 *  This material may be reproduced by or for the U.S. Government pursuant
 *  to the copyright license under the clause at DFARS 252.227-7013.  This
 *  notice must appear in all copies of this file and its derivatives.
 *
 *  $Id$
 */


#include <asm.h>

        .text

/*  void _CPU_Context_switch( run_context, heir_context )
 *
 *  This routine performs a normal non-FP context.
 */

        .align  4
        .global SYM (_CPU_Context_switch)

.set RUNCONTEXT_ARG,   4                   | save context argument
.set HEIRCONTEXT_ARG,  8                   | restore context argument

SYM (_CPU_Context_switch):
          moval    a7@(RUNCONTEXT_ARG),a0| a0 = running thread context
          movw     sr,d1                 | d1 = status register
          movml    d1-d7/a2-a7,a0@       | save context

          moval    a7@(HEIRCONTEXT_ARG),a0| a0 = heir thread context
restore:  movml    a0@,d1-d7/a2-a7     | restore context
          movw     d1,sr                  | restore status register
          rts

/*PAGE
 *  void __CPU_Context_save_fp_context( &fp_context_ptr )
 *  void __CPU_Context_restore_fp_context( &fp_context_ptr )
 *
 *  These routines are used to context switch a MC68881 or MC68882.
 *
 *  NOTE:  Context save and restore code is based upon the code shown
 *         on page 6-38 of the MC68881/68882 Users Manual (rev 1).
 *
 *         CPU_FP_CONTEXT_SIZE is higher than expected to account for the
 *         -1 pushed at end of this sequence.
 */

.set FPCONTEXT_ARG,   4                    | save FP context argument

        .align  4
        .global SYM (_CPU_Context_save_fp)
SYM (_CPU_Context_save_fp):
#if ( M68K_HAS_FPU == 1 )
        moval    a7@(FPCONTEXT_ARG),a1   | a1 = &ptr to context area
        moval    a1@,a0                  | a0 = Save context area
        fsave    a0@-                     | save 68881/68882 state frame
        tstb     a0@                      | check for a null frame
        beq      nosv                      | Yes, skip save of user model
        fmovem   fp0-fp7,a0@-           | save data registers (fp0-fp7)
        fmovem   fpc/fps/fpi,a0@-      | and save control registers
        movl     #-1,a0@-                 | place not-null flag on stack
nosv:   movl     a0,a1@                  | save pointer to saved context
#endif
        rts

        .align  4
        .global SYM (_CPU_Context_restore_fp)
SYM (_CPU_Context_restore_fp):
#if ( M68K_HAS_FPU == 1 )
        moval    a7@(FPCONTEXT_ARG),a1   | a1 = &ptr to context area
        moval    a1@,a0                  | a0 = address of saved context
        tstb     a0@                      | Null context frame?
        beq      norst                     | Yes, skip fp restore
        addql    #4,a0                    | throwaway non-null flag
        fmovem   a0@+,fpc/fps/fpi      | restore control registers
        fmovem   a0@+,fp0-fp7           | restore data regs (fp0-fp7)
norst:  frestore a0@+                     | restore the fp state frame
        movl     a0,a1@                  | save pointer to saved context
#endif
        rts

/*PAGE
 *  void _ISR_Handler()
 *
 *  This routine provides the RTEMS interrupt management.
 *
 *  NOTE:
 *    Upon entry, the master stack will contain an interrupt stack frame
 *    back to the interrupted thread and the interrupt stack will contain
 *    a throwaway interrupt stack frame.  If dispatching is enabled, this
 *    is the outer most interrupt, and (a context switch is necessary or
 *    the current thread has signals), then set up the master stack to
 *    transfer control to the interrupt dispatcher.
 */

.set SR_OFFSET,    0                     | Status register offset
.set PC_OFFSET,    2                     | Program Counter offset
.set FVO_OFFSET,   6                     | Format/vector offset

.set SAVED,        16                    | space for saved registers

        .align  4
        .global SYM (_ISR_Handler)

SYM (_ISR_Handler):
        moveml  d0-d1/a0-a1,a7@-    | save d0-d1,a0-a1
        addql   #1,SYM (_ISR_Nest_level)       | one nest level deeper
        addql   #1,SYM (_Thread_Dispatch_disable_level)
                                         | disable multitasking
        movew   a7@(SAVED+FVO_OFFSET),d0 | d0 = F/VO
        andl    #0x0fff,d0              | d0 = vector offset in vbr

#if ( M68K_HAS_PREINDEXING == 1 )
        movel   @( SYM (_ISR_Vector_table),d0:w:1),a0| fetch the ISR
#else
        movel   # SYM (_ISR_Vector_table),a0   | a0 = base of RTEMS table
        addal   d0,a0                  | a0 = address of vector
        movel   @(a0),a0               | a0 = address of user routine
#warning "UNTESTED CODE!!!"
#endif

        lsrl    #2,d0                   | d0 = vector number
        movel   d0,a7@-                | push vector number
        jbsr    a0@                     | invoke the user ISR
        addql   #4,a7                   | remove vector number

        subql   #1,SYM (_ISR_Nest_level)       | one less nest level
        subql   #1,SYM (_Thread_Dispatch_disable_level)
                                         | unnest multitasking
        bne     exit                     | If dispatch disabled, exit

        movew   #0xf000,d0              | isolate format nibble
        andw    a7@(SAVED+FVO_OFFSET),d0 | get F/VO
        cmpiw   #0x1000,d0              | is it a throwaway isf?
        bne     exit                     | NOT outer level, so branch

        tstl    SYM (_Context_Switch_necessary)
                                         | Is thread switch necessary?
        bne     bframe                   | Yes, invoke dispatcher

        tstl    SYM (_ISR_Signals_to_thread_executing)
                                         | signals sent to Run_thread
                                         |   while in interrupt handler?
        beq     exit                     | No, then exit


bframe: clrl    SYM (_ISR_Signals_to_thread_executing)
                                         | If sent, will be processed
#if ( M68K_HAS_SEPARATE_STACKS == 1 )
        movec   msp,a0                 | a0 = master stack pointer
        movew   #0,a0@-                 | push format word
        movel   # SYM (_ISR_Dispatch),a0@-    | push return addr
        movew   a0@(6+SR_OFFSET),a0@-  | push thread sr
        movec   a0,msp                 | set master stack pointer
#else
#warning "FIX ME ... HOW DO I DISPATCH FROM AN INTERRUPT?"
/* probably will simply need to push the _ISR_Dispatch frame */
#endif

exit:   moveml  a7@+,d0-d1/a0-a1    | restore d0-d1,a0-a1
        rte                              | return to thread
                                         |   OR _Isr_dispatch

/*PAGE
 *  void _ISR_Dispatch()
 *
 *  Entry point from the outermost interrupt service routine exit.
 *  The current stack is the supervisor mode stack if this processor
 *  has separate stacks.
 *
 *    1.  save all registers not preserved across C calls.
 *    2.  invoke the _Thread_Dispatch routine to switch tasks
 *        or a signal to the currently executing task.
 *    3.  restore all registers not preserved across C calls.
 *    4.  return from interrupt
 */

        .global SYM (_ISR_Dispatch)
SYM (_ISR_Dispatch):
        movml   d0-d1/a0-a1,a7@-
        jsr     SYM (_Thread_Dispatch)
        movml   a7@+,d0-d1/a0-a1
        rte