source: rtems/c/src/exec/libcsupport/src/mount.c @ 4b0d1ab

/*
 *  mount()
 *
 *  XXX
 *
 *  XXX make sure no required ops are NULL 
 *  XXX make sure no optional ops you are using are NULL 
 *  XXX unmount should be required.
 *
 *  COPYRIGHT (c) 1989-1999.
 *  On-Line Applications Research Corporation (OAR).
 *
 *  The license and distribution terms for this file may be
 *  found in the file LICENSE in this distribution or at
 *  http://www.OARcorp.com/rtems/license.html.
 *
 *  $Id$
 */

#include <sys/types.h>
#include <sys/stat.h>
#include <chain.h>
#include <fcntl.h>
#include <unistd.h>
#include <errno.h>
#include <stdlib.h>
#include <string.h>
#include <assert.h>

#include <rtems/libio_.h>

Chain_Control rtems_filesystem_mount_table_control;

/*
 *  Prototypes that probably should be somewhere else.
 */

int init_fs_mount_table( void );
static int Is_node_fs_root(
  rtems_filesystem_location_info_t  *loc
);


/*
 *  XXX
 */

#define FOUND      0
#define NOT_FOUND -1

/*
 *  mount
 *
 *  This routine will attempt to mount a new file system at the specified 
 *  mount point. A series of tests will be run to determine if any of the 
 *  following reasons exist to prevent the mount operation:
 *
 *      1) The file system type or options are not valid
 *      2) No new file system root node is specified
 *      3) The selected file system has already been mounted
 *      4) The mount point exists with the proper permissions to allow mounting
 *      5) The selected mount point already has a file system mounted to it
 *
 */

int mount(
  rtems_filesystem_mount_table_entry_t **mt_entry,
  rtems_filesystem_operations_table    *fs_ops,
  rtems_filesystem_options_t            options,
  char                                 *device,
  char                                 *mount_point
)
{
  rtems_filesystem_location_info_t      loc;
  rtems_filesystem_mount_table_entry_t *temp_mt_entry;
  rtems_filesystem_location_info_t     *loc_to_free = NULL;

/* XXX add code to check for required operations */

  /*
   *  Is there a file system operations table?
   */

  if ( fs_ops == NULL ) {
    errno = EINVAL;
    return -1;
  }

  /*
   *  Are the file system options valid?
   */

  if ( options != RTEMS_FILESYSTEM_READ_ONLY && 
       options != RTEMS_FILESYSTEM_READ_WRITE ) {
    errno = EINVAL;
    return -1;
  }

  /*
   * Allocate a mount table entry 
   */

   temp_mt_entry = malloc( sizeof(rtems_filesystem_mount_table_entry_t) );

   if ( !temp_mt_entry ) {
     errno = ENOMEM;
     return -1;
   }

   temp_mt_entry->mt_fs_root.mt_entry = temp_mt_entry;
   temp_mt_entry->options = options;
   if ( device )
     strcpy( temp_mt_entry->dev, device );
   else
     temp_mt_entry->dev = 0;

  /*
   *  The mount_point should be a directory with read/write/execute
   *  permissions in the existing tree. 
   */

  if ( mount_point ) {

    if ( rtems_filesystem_evaluate_path( 
            mount_point, RTEMS_LIBIO_PERMS_RWX, &loc, TRUE ) == -1 )
      goto cleanup_and_bail;

    /* 
     *  Test to see if it is a directory
     */

    loc_to_free = &loc;
    if ( loc.ops->node_type_h( &loc ) != RTEMS_FILESYSTEM_DIRECTORY ) {
      errno = ENOTDIR;
      goto cleanup_and_bail;
    }

    /*
     *  You can only mount one file system onto a single mount point.
     */

    if ( Is_node_fs_root(  &loc ) ){
      errno = EBUSY;
      goto cleanup_and_bail;
    }
 
    /*
     *  This must be a good mount point, so move the location information
     *  into the allocated mount entry.  Note:  the information that
     *  may have been allocated in loc should not be sent to freenode 
     *  until the system is unmounted.  It may be needed to correctly
     *  traverse the tree.
     */

    temp_mt_entry->mt_point_node.node_access = loc.node_access;
    temp_mt_entry->mt_point_node.handlers = loc.handlers;
    temp_mt_entry->mt_point_node.ops = loc.ops;
    temp_mt_entry->mt_point_node.mt_entry = loc.mt_entry;

    /* 
     *  This link to the parent is only done when we are dealing with system 
     *  below the base file system 
     */

    if ( !loc.ops->mount_h ){
      errno = ENOTSUP;
      goto cleanup_and_bail;
    }

    if ( loc.ops->mount_h( temp_mt_entry ) ) {
      goto cleanup_and_bail;
    }
  } else {

    /* 
     *  This is a mount of the base file system --> The 
     *  mt_point_node.node_access will be set to null to indicate that this 
     *  is the root of the entire file system.
     */

    temp_mt_entry->mt_fs_root.node_access = NULL;
    temp_mt_entry->mt_fs_root.handlers = NULL;
    temp_mt_entry->mt_fs_root.ops = NULL;

    temp_mt_entry->mt_point_node.node_access = NULL;
    temp_mt_entry->mt_point_node.handlers = NULL;
    temp_mt_entry->mt_point_node.ops = NULL;
    temp_mt_entry->mt_point_node.mt_entry = NULL;
  }

  if ( !fs_ops->fsmount_me_h ) {
    errno = ENOTSUP;
    goto cleanup_and_bail;
  }

  if ( fs_ops->fsmount_me_h( temp_mt_entry ) )
    goto cleanup_and_bail;

  /*
   *  Add the mount table entry to the mount table chain 
   */

  Chain_Append( &rtems_filesystem_mount_table_control, &temp_mt_entry->Node );

  *mt_entry = temp_mt_entry;

  return 0;

cleanup_and_bail:

  free( temp_mt_entry );
  
  if ( loc_to_free )
    rtems_filesystem_freenode( loc_to_free );

  return -1;
}



/*
 *  init_fs_mount_table
 *
 *  This routine will initialize the chain control element that manages the
 *  mount table chain.
 */

int init_fs_mount_table()
{
  Chain_Initialize_empty ( &rtems_filesystem_mount_table_control );
  return 0;
}

/*
 *  Is_node_fs_root
 *
 *  This routine will run through the entries that currently exist in the
 *  mount table chain. For each entry in the mount table chain it will
 *  compare the mount tables root node to the node describing the selected
 *  mount point. If any match is found true is returned else false is 
 *  returned.
 *
 */

static int Is_node_fs_root(
  rtems_filesystem_location_info_t  *loc
)
{
  Chain_Node                           *the_node;
  rtems_filesystem_mount_table_entry_t *the_mount_entry;

  /* 
   * For each mount table entry 
   */

  for ( the_node = rtems_filesystem_mount_table_control.first;
        !Chain_Is_tail( &rtems_filesystem_mount_table_control, the_node );
        the_node = the_node->next ) {
     the_mount_entry = (rtems_filesystem_mount_table_entry_t *) the_node;
     if ( the_mount_entry->mt_fs_root.node_access  == loc->node_access )
        return TRUE;
  }
  return FALSE;
}