source: rtems/c/configure.in @ 5e77d129

4.104.114.84.95
Last change on this file since 5e77d129 was 70810dc, checked in by Joel Sherrill <joel.sherrill@…>, on Feb 8, 2000 at 10:33:25 PM

Patches rtems-rc-20000204-0.diff from Ralf Corsepius <corsepiu@…>
that contains:

  • Removes remaining (now illegal) references to $(SRC) from a couple of Makefile.ams
  • Removes duplicate AC_CONFIG_SUBDIRS macro from c/configure.in
  • Moves ENABLE_LIBCDIR into RTEMS_PROG_C[C|XX]_FOR_TARGET (hides LIBCDIR from most configure scripts, i.e. LIBCDIR becomes less visible)
  • Adds RTEMS_PROG_C[C|XX]_FOR_TARGET and RTEMS_CANONICALIZE_TOOLS to libbsp/*/configure.ins (A minor bug in previous implementations, which only has an impact when switching to GNU/Cygnus canonicalization)
  • Cleans up several bogus comments.
  • Removes MKLIB
  • Switches the version number to 4.5.0 (for testing version number handling)
  • Property mode set to 100644
File size: 2.9 KB
Line 
1dnl Process this file with autoconf to produce a configure script.
2dnl
3dnl  $Id$
4
5AC_PREREQ(2.13)
6AC_INIT(src)
7RTEMS_TOP(..)
8AC_CONFIG_AUX_DIR(..)
9
10RTEMS_CANONICAL_TARGET_CPU
11
12AM_INIT_AUTOMAKE(rtems-c,$RTEMS_VERSION,no)
13AM_MAINTAINER_MODE
14
15dnl These options are used within this file.
16RTEMS_ENABLE_BARE
17RTEMS_ENABLE_RTEMSBSP(rtems_bsp)
18
19RTEMS_CHECK_CPU
20RTEMS_CANONICAL_HOST
21
22if test -z "$rtems_bsp"; then
23  RTEMS_CHECK_BSPS(rtems_bsp)
24fi
25
26for i in $rtems_bsp; do
27
28    # make sure there is a make/custom file for the bsp
29    RTEMS_CHECK_CUSTOM_BSP(i)
30 
31    RTEMS_BSP_ALIAS($i,bspdir)
32
33    # Is there code where there should be for this BSP?
34    # The bare bsp is a special case as it is not under the RTEMS_CPU path
35    case $bspdir in
36      bare)
37        bspcpudir=
38        if test "X${BARE_CPU_CFLAGS}" = "X" ; then
39          AC_MSG_ERROR([--enable-bare-cpu-cflags not specified for bare bsp])
40        fi
41        if test "X${BARE_CPU_MODEL}" = "X" ; then
42          AC_MSG_ERROR([--enable-bare-cpu-model not specified for bare bsp])
43        fi
44        ;;
45      *)
46        bspcpudir=$RTEMS_CPU/
47        ;;
48    esac
49     
50    if test -d "$srcdir/$RTEMS_TOPdir/c/src/lib/libbsp/$bspcpudir$bspdir"; then
51      RTEMS_BSP_LIST="$RTEMS_BSP_LIST $i"
52    else
53      AC_MSG_ERROR([unable to find libbsp directory ($bspdir) for  $i])
54    fi
55done
56
57#
58# Compose the configuration arguments to be passed to c/src/configure
59#
60##
61## Partially borrowed from autoconf-2.13
62##
63
64## Adjust paths
65case $srcdir in
66/*) rtems_bsp_configure="$srcdir/src/configure";;
67*)  rtems_bsp_configure="../$srcdir/src/configure";;
68esac
69
70## Remove --cache-file, --srcdir and --enable-rtemsbsp arguments
71## so they do not pile up
72  rtems_bsp_configure_args=
73  for ac_arg in $ac_configure_args; do
74    if test -n "$ac_prev"; then
75      ac_prev=
76      continue
77    fi
78    case "$ac_arg" in
79    -cache-file | --cache-file | --cache-fil | --cache-fi \
80    | --cache-f | --cache- | --cache | --cach | --cac | --ca | --c)
81      ac_prev=cache_file ;;
82    -cache-file=* | --cache-file=* | --cache-fil=* | --cache-fi=* \
83    | --cache-f=* | --cache-=* | --cache=* | --cach=* | --cac=* | --ca=* | --c=*)
84      ;;
85    -srcdir | --srcdir | --srcdi | --srcd | --src | --sr)
86      ac_prev=srcdir ;;
87    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
88      ;;
89    --enable-rtemsbsp*) ;;
90    -srcdir=* | --srcdir=* | --srcdi=* | --srcd=* | --src=* | --sr=*)
91      ;;
92    *) rtems_bsp_configure_args="$rtems_bsp_configure_args $ac_arg" ;;
93    esac
94  done
95
96rtems_bsp_configure="$rtems_bsp_configure $rtems_bsp_configure_args"
97AC_SUBST(rtems_bsp_configure)
98
99AC_SUBST(RTEMS_BSP_LIST)
100
101AC_CONFIG_SUBDIRS(make)
102
103# Explicitly list all Makefiles here
104AC_OUTPUT(
105Makefile
106)
107
108echo
109echo target architecture: $target_cpu.
110echo available BSPs: $rtems_bsp.
111echo \'make all\' will build the following BSPs: $RTEMS_BSP_LIST.
112echo other BSPs can be built with \'make RTEMS_BSP=\"bsp1 bsp2 ...\"\'
113echo
Note: See TracBrowser for help on using the repository browser.