source: rtems/c/PROBLEMS @ 2b5944cf
Last change on this file since 2b5944cf was 7826883, checked in by Joel Sherrill <joel.sherrill@…>, on 12/08/95 at 21:05:27

updated for 3.5.02 snapshot

  • Property mode set to 100644
File size: 2.5 KB
2#  $Id$
5This is the list of outstanding problems in this release.
7+   The POSIX threads and real time extensions code in this tree does
8    not work yet and is intentionally not in the normal build path.
10+   The m68000 support is nearly complete now.  The missing piece
11    inside the executive proper is support for the software interrupt
12    stack.  Also, the m68k family has become quite large and an
13    understanding of the compatibility of the peripherals on the various
14    members of the 683xx family would allow someone to designate some
15    of the drivers submitted for the gen683xx BSPs as useful on other
16    members.
18+   The only i960 family member tested is the CA.  No support for the
19    floating point support found in other family members is present.
20    This also implies that RTEMS may "think" of something as generic
21    across the i960 family when in fact it is specific to the CA.
23+   Some of the BSPs still define RAM_START and RAM_END in the bsp.h file.
24    It is better to define these in the linkcmds file.  It is also nice
25    to use the linkcmds file to place overlays for on-board hardware.
27+   The __read() system call in all of the BSPs using single
28    character input/output needs to be smarter.  The following
29    issues need to be addressed:
31       + echoing of characters on input
32       + CR/NL echoing
33       + backspaces
34       + tabs
36+   UNIX port notes:
38       + sometimes a stray SIGALRM is reported as spfatal completes.
40       + There are conflicts between the names of native library routines
41         which MUST be used and those in the POSIX support.  This must
42         be addressed.
44+   Some of the tests may execute correctly and not produce the exact
45    ordering of lines in the screen file.  This appears to be a combination
46    of a number of factors including buffering, processor speed, IO
47    device overhead, and clock interrupt rate.
49+   The compiler configuration files (c/make/gcc-XYZ.cfg) are largely
50    the same when the different targets have the same CPU.  It would
51    be desirable to have a gcc-CPU.cfg or gcc-CPU_MODEL.cfg (e.g.
52    gcc-m68k.cfg or gcc-m68020.cfg) and have the file gcc-TARGET.cfg
53    include this and possibly override default settings.
55+   The clock device drivers should really avoid doing the division
56    by 1000 in the clock tick ISR to convert microseconds into
57    milliseconds.  This only applies to clock drivers which generate
58    an ISR each millisecond and only call rtems_clock_tick every
59    so many ISRs.
Note: See TracBrowser for help on using the repository browser.