source: rtems/bsps/sparc/include/bsp/gr_rasta_io.h @ 2afb22b

5
Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.
  • Property mode set to 100644
File size: 1.5 KB
Line 
1/*  GR-RASTA-IO PCI Target driver.
2 *
3 *  COPYRIGHT (c) 2008.
4 *  Cobham Gaisler AB.
5 *
6 *  Configures the GR-RASTA-IO interface PCI board.
7 *  This driver provides a AMBA PnP bus by using the general part
8 *  of the AMBA PnP bus driver (ambapp_bus.c).
9 *
10 *  Driver resources for the AMBA PnP bus provided can be set using
11 *  gr_rasta_io_set_resources().
12 *
13 *  The license and distribution terms for this file may be
14 *  found in found in the file LICENSE in this distribution or at
15 *  http://www.rtems.org/license/LICENSE.
16 */
17
18#ifndef __GR_RASTA_IO_H__
19#define __GR_RASTA_IO_H__
20
21#include <drvmgr/drvmgr.h>
22
23#ifdef __cplusplus
24extern "C" {
25#endif
26
27/* An array of pointers to GR-RASTA-IO resources. The resources will be
28 * used by the drivers controlling the cores on the GR-RASTA-IO target AMBA bus.
29 *
30 * The gr_rasta_io_resources is declared weak so that the user can override the
31 * default configuration. The array must be terminated with a NULL resource.
32 */
33extern struct drvmgr_bus_res *gr_rasta_io_resources[];
34
35/* Options to gr_rasta_io_print function */
36#define RASTA_IO_OPTIONS_AMBA   0x01 /* Print AMBA bus devices */
37#define RASTA_IO_OPTIONS_IRQ    0x02 /* Print current IRQ setup */
38
39/* Print information about GR-RASTA-IO PCI boards */
40void gr_rasta_io_print(int options);
41
42/* Print information about a GR-RASTA-IO PCI board */
43void gr_rasta_io_print_dev(struct drvmgr_dev *dev, int options);
44
45/* Register GR-RASTA-IO driver */
46void gr_rasta_io_register_drv(void);
47
48#ifdef __cplusplus
49}
50#endif
51
52#endif
Note: See TracBrowser for help on using the repository browser.