source: rtems/bsps/sh/gensh4/include/rtems/score/ispsh7750.h @ 2afb22b

Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on Dec 23, 2017 at 7:18:56 AM

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "" files.

Update #3254.

  • Property mode set to 100644
File size: 1.6 KB
2 *  This include file contains information pertaining to the Hitachi
3 *  SH7750 processor.
4 *
5 *  Copyright (C) 2001 OKTET Ltd., St.-Petersburg, Russia
6 *  Author: Victor V. Vengerov <>
7 *
8 *  Based on work of:
9 *  Authors: Ralf Corsepius ( and
10 *           Bernd Becker (
11 *
12 *  COPYRIGHT (c) 1997-1998, FAW Ulm, Germany
13 *
14 *  This program is distributed in the hope that it will be useful,
15 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
17 *
18 *
19 *  COPYRIGHT (c) 1998.
20 *  On-Line Applications Research Corporation (OAR).
21 *
22 *  The license and distribution terms for this file may be
23 *  found in the file LICENSE in this distribution or at
24 *
25 *
26 *  Modified to reflect isp entries for sh7045 processor:
27 *  John M. Mills (
28 *  TGA Technologies, Inc.
29 *  100 Pinnacle Way, Suite 140
30 *  Norcross, GA 30071 U.S.A.
31 *
32 *
33 *  This modified file may be copied and distributed in accordance
34 *  the above-referenced license. It is provided for critique and
35 *  developmental purposes without any warranty nor representation
36 *  by the authors or by TGA Technologies.
37 */
39#ifndef __CPU_ISPS_H
40#define __CPU_ISPS_H
42#ifdef __cplusplus
43extern "C" {
46#include <rtems/score/types.h>
48/* dummy ISP */
49extern void _dummy_isp( void );
51extern void __ISR_Handler( uint32_t   vector );
53/* This variable contains VBR value used to pass control when debug, error
54 * or virtual memory exceptions occured.
55 */
56extern void *_VBR_Saved;
58#ifdef __cplusplus
Note: See TracBrowser for help on using the repository browser.