source: rtems/bsps/powerpc/virtex5/include/bsp/irq.h @ 2afb22b

5
Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.
  • Property mode set to 100644
File size: 2.9 KB
RevLine 
[16a8616]1/*===============================================================*\
2| Project: RTEMS virtex BSP                                       |
3+-----------------------------------------------------------------+
4|                    Copyright (c) 2007                           |
5|                    Embedded Brains GmbH                         |
6|                    Obere Lagerstr. 30                           |
7|                    D-82178 Puchheim                             |
8|                    Germany                                      |
9|                    rtems@embedded-brains.de                     |
10+-----------------------------------------------------------------+
11| The license and distribution terms for this file may be         |
12| found in the file LICENSE in this distribution or at            |
13|                                                                 |
[c499856]14| http://www.rtems.org/license/LICENSE.                           |
[16a8616]15|                                                                 |
16+-----------------------------------------------------------------+
17| this file declares constants of the interrupt controller        |
18\*===============================================================*/
19#ifndef VIRTEX5_IRQ_IRQ_H
20#define VIRTEX5_IRQ_IRQ_H
21
22#include <rtems/irq.h>
23
24/*
25 * the following definitions specify the indices used
26 * to interface the interrupt handler API
27 */
28
29/*
30 * Peripheral IRQ handlers related definitions
31 */
32  /* Not supported at this level */
33
34/*
35 * Processor IRQ handlers related definitions
36 */
37#define BSP_PROCESSOR_IRQ_NUMBER        3
38#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET 0
39#define BSP_PROCESSOR_IRQ_MAX_OFFSET    (BSP_PROCESSOR_IRQ_LOWEST_OFFSET\
40                                         +BSP_PROCESSOR_IRQ_NUMBER-1)
41
42#define BSP_IS_PROCESSOR_IRQ(irqnum)                 \
43  (((irqnum) >= BSP_PROCESSOR_IRQ_LOWEST_OFFSET) &&  \
44   ((irqnum) <= BSP_PROCESSOR_IRQ_MAX_OFFSET))
45
46/*
47 * Summary
48 */
49#define BSP_IRQ_NUMBER                  (BSP_PROCESSOR_IRQ_MAX_OFFSET+1)
50#define BSP_LOWEST_OFFSET                BSP_PROCESSOR_IRQ_LOWEST_OFFSET
51#define BSP_MAX_OFFSET                   BSP_PROCESSOR_IRQ_MAX_OFFSET
52
53#define BSP_IS_VALID_IRQ(irqnum)        (BSP_IS_PROCESSOR_IRQ(irqnum))
54
55#ifndef ASM
56#ifdef __cplusplus
57extern "C" {
58#endif
59
60/*
61 * index table for the module specific handlers, a few entries are only placeholders
62 */
63  typedef enum {
64    BSP_EXT               = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 0,
65    BSP_PIT               = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 1,
66    BSP_CRIT              = BSP_PROCESSOR_IRQ_LOWEST_OFFSET + 2
67  } rtems_irq_symbolic_name;
68
69  extern rtems_irq_connect_data *BSP_rtems_irq_tbl;
[967278f]70  void BSP_irqexc_on_fnc(const rtems_irq_connect_data *conn_data);
71  void BSP_irqexc_off_fnc(const rtems_irq_connect_data *unused);
[16a8616]72  void BSP_rtems_irq_mngt_init(unsigned cpuId);
73
[655bd39]74#define BSP_DEC           BSP_PIT
75#define BSP_DECREMENTER   BSP_PIT
76
[f7351e4]77#ifdef __cplusplus
78}
[16a8616]79#endif
80#endif /* ASM */
81
82#endif /* VIRTEX5_IRQ_IRQ_H */
Note: See TracBrowser for help on using the repository browser.