source: rtems/bsps/powerpc/motorola_powerpc/bootloader/zlib.h @ eb36d11

Last change on this file since eb36d11 was 03e1d837, checked in by Sebastian Huber <sebastian.huber@…>, on Apr 24, 2018 at 5:06:36 AM

bsps/powerpc: Move bootloader to bsps

This bootloader is only used by the motorola_powerpc BSP.

This patch is a part of the BSP source reorganization.

Update #3285.

  • Property mode set to 100644
File size: 16.9 KB
2 * This file is derived from zlib.h and zconf.h from the zlib-0.95
3 * distribution by Jean-loup Gailly and Mark Adler, with some additions
4 * by Paul Mackerras to aid in implementing Deflate compression and
5 * decompression for PPP packets.
6 */
9 *  ==FILEVERSION 960122==
10 *
11 * This marker is used by the Linux installation script to determine
12 * whether an up-to-date version of this file is already installed.
13 */
15/* zlib.h -- interface of the 'zlib' general purpose compression library
16  version 0.95, Aug 16th, 1995.
18  Copyright (C) 1995 Jean-loup Gailly and Mark Adler
20  This software is provided 'as-is', without any express or implied
21  warranty.  In no event will the authors be held liable for any damages
22  arising from the use of this software.
24  Permission is granted to anyone to use this software for any purpose,
25  including commercial applications, and to alter it and redistribute it
26  freely, subject to the following restrictions:
28  1. The origin of this software must not be misrepresented; you must not
29     claim that you wrote the original software. If you use this software
30     in a product, an acknowledgment in the product documentation would be
31     appreciated but is not required.
32  2. Altered source versions must be plainly marked as such, and must not be
33     misrepresented as being the original software.
34  3. This notice may not be removed or altered from any source distribution.
36  Jean-loup Gailly        Mark Adler
38 */
40#ifndef _ZLIB_H
41#define _ZLIB_H
43#define local
44#ifdef DEBUG_ZLIB
45#include <bsp/consoleIo.h>
46#define fprintf printk
49/* #include "zconf.h" */        /* included directly here */
51/* zconf.h -- configuration of the zlib compression library
52 * Copyright (C) 1995 Jean-loup Gailly.
53 * For conditions of distribution and use, see copyright notice in zlib.h
54 */
56/* From: zconf.h,v 1.12 1995/05/03 17:27:12 jloup Exp */
59     The library does not install any signal handler. It is recommended to
60  add at least a handler for SIGSEGV when decompressing; the library checks
61  the consistency of the input data whenever possible but may go nuts
62  for some forms of corrupted input.
63 */
66 * Compile with -DMAXSEG_64K if the alloc function cannot allocate more
67 * than 64k bytes at a time (needed on systems with 16-bit int).
68 * Compile with -DUNALIGNED_OK if it is OK to access shorts or ints
69 * at addresses which are not a multiple of their size.
70 * Under DOS, -DFAR=far or -DFAR=__far may be needed.
71 */
73#ifndef STDC
74#  if defined(MSDOS) || defined(__STDC__) || defined(__cplusplus)
75#    define STDC
76#  endif
79#ifdef  __MWERKS__ /* Metrowerks CodeWarrior declares fileno() in unix.h */
80#  include <unix.h>
83/* Maximum value for memLevel in deflateInit2 */
84#ifndef MAX_MEM_LEVEL
85#  ifdef MAXSEG_64K
86#    define MAX_MEM_LEVEL 8
87#  else
88#    define MAX_MEM_LEVEL 9
89#  endif
92#ifndef FAR
93#  define FAR
96/* Maximum value for windowBits in deflateInit2 and inflateInit2 */
97#ifndef MAX_WBITS
98#  define MAX_WBITS   15 /* 32K LZ77 window */
101/* The memory requirements for deflate are (in bytes):
102            1 << (windowBits+2)   +  1 << (memLevel+9)
103 that is: 128K for windowBits=15  +  128K for memLevel = 8  (default values)
104 plus a few kilobytes for small objects. For example, if you want to reduce
105 the default memory requirements from 256K to 128K, compile with
106     make CFLAGS="-O -DMAX_WBITS=14 -DMAX_MEM_LEVEL=7"
107 Of course this will generally degrade compression (there's no free lunch).
109   The memory requirements for inflate are (in bytes) 1 << windowBits
110 that is, 32K for windowBits=15 (default value) plus a few kilobytes
111 for small objects.
114                        /* Type declarations */
116#ifndef OF /* function prototypes */
117#  ifdef STDC
118#    define OF(args)  args
119#  else
120#    define OF(args)  ()
121#  endif
124typedef unsigned char  Byte;  /* 8 bits */
125typedef unsigned int   uInt;  /* 16 bits or more */
126typedef unsigned long  uLong; /* 32 bits or more */
128typedef Byte FAR Bytef;
129typedef char FAR charf;
130typedef int FAR intf;
131typedef uInt FAR uIntf;
132typedef uLong FAR uLongf;
134#ifdef STDC
135   typedef void FAR *voidpf;
136   typedef void     *voidp;
138   typedef Byte FAR *voidpf;
139   typedef Byte     *voidp;
142/* end of original zconf.h */
144#define ZLIB_VERSION "0.95P"
147     The 'zlib' compression library provides in-memory compression and
148  decompression functions, including integrity checks of the uncompressed
149  data.  This version of the library supports only one compression method
150  (deflation) but other algorithms may be added later and will have the same
151  stream interface.
153     For compression the application must provide the output buffer and
154  may optionally provide the input buffer for optimization. For decompression,
155  the application must provide the input buffer and may optionally provide
156  the output buffer for optimization.
158     Compression can be done in a single step if the buffers are large
159  enough (for example if an input file is mmap'ed), or can be done by
160  repeated calls of the compression function.  In the latter case, the
161  application must provide more input and/or consume the output
162  (providing more output space) before each call.
165typedef voidpf (*alloc_func) OF((voidpf opaque, uInt items, uInt size));
166typedef void   (*free_func)  OF((voidpf opaque, voidpf address, uInt nbytes));
168struct internal_state;
170typedef struct z_stream_s {
171    Bytef    *next_in;  /* next input byte */
172    uInt     avail_in;  /* number of bytes available at next_in */
173    uLong    total_in;  /* total nb of input bytes read so far */
175    Bytef    *next_out; /* next output byte should be put there */
176    uInt     avail_out; /* remaining free space at next_out */
177    uLong    total_out; /* total nb of bytes output so far */
179    char     *msg;      /* last error message, NULL if no error */
180    struct internal_state FAR *state; /* not visible by applications */
182    alloc_func zalloc;  /* used to allocate the internal state */
183    free_func  zfree;   /* used to free the internal state */
184    voidp      opaque;  /* private data object passed to zalloc and zfree */
186    Byte     data_type; /* best guess about the data type: ascii or binary */
188} z_stream;
191   The application must update next_in and avail_in when avail_in has
192   dropped to zero. It must update next_out and avail_out when avail_out
193   has dropped to zero. The application must initialize zalloc, zfree and
194   opaque before calling the init function. All other fields are set by the
195   compression library and must not be updated by the application.
197   The opaque value provided by the application will be passed as the first
198   parameter for calls of zalloc and zfree. This can be useful for custom
199   memory management. The compression library attaches no meaning to the
200   opaque value.
202   zalloc must return Z_NULL if there is not enough memory for the object.
203   On 16-bit systems, the functions zalloc and zfree must be able to allocate
204   exactly 65536 bytes, but will not be required to allocate more than this
205   if the symbol MAXSEG_64K is defined (see zconf.h). WARNING: On MSDOS,
206   pointers returned by zalloc for objects of exactly 65536 bytes *must*
207   have their offset normalized to zero. The default allocation function
208   provided by this library ensures this (see zutil.c). To reduce memory
209   requirements and avoid any allocation of 64K objects, at the expense of
210   compression ratio, compile the library with -DMAX_WBITS=14 (see zconf.h).
212   The fields total_in and total_out can be used for statistics or
213   progress reports. After compression, total_in holds the total size of
214   the uncompressed data and may be saved for use in the decompressor
215   (particularly if the decompressor wants to decompress everything in
216   a single step).
219                        /* constants */
221#define Z_NO_FLUSH      0
222#define Z_PARTIAL_FLUSH 1
223#define Z_FULL_FLUSH    2
224#define Z_SYNC_FLUSH    3 /* experimental: partial_flush + byte align */
225#define Z_FINISH        4
226#define Z_PACKET_FLUSH  5
227/* See deflate() below for the usage of these constants */
229#define Z_OK            0
230#define Z_STREAM_END    1
231#define Z_ERRNO        (-1)
232#define Z_STREAM_ERROR (-2)
233#define Z_DATA_ERROR   (-3)
234#define Z_MEM_ERROR    (-4)
235#define Z_BUF_ERROR    (-5)
236/* error codes for the compression/decompression functions */
238#define Z_BEST_SPEED             1
239#define Z_BEST_COMPRESSION       9
240#define Z_DEFAULT_COMPRESSION  (-1)
241/* compression levels */
243#define Z_FILTERED            1
244#define Z_HUFFMAN_ONLY        2
245#define Z_DEFAULT_STRATEGY    0
247#define Z_BINARY   0
248#define Z_ASCII    1
249#define Z_UNKNOWN  2
250/* Used to set the data_type field */
252#define Z_NULL  0  /* for initializing zalloc, zfree, opaque */
254extern char *zlib_version;
255/* The application can compare zlib_version and ZLIB_VERSION for consistency.
256   If the first character differs, the library code actually used is
257   not compatible with the zlib.h header file used by the application.
258 */
260                        /* basic functions */
262extern int inflateInit OF((z_stream *strm));
264     Initializes the internal stream state for decompression. The fields
265   zalloc and zfree must be initialized before by the caller.  If zalloc and
266   zfree are set to Z_NULL, inflateInit updates them to use default allocation
267   functions.
269     inflateInit returns Z_OK if success, Z_MEM_ERROR if there was not
270   enough memory.  msg is set to null if there is no error message.
271   inflateInit does not perform any decompression: this will be done by
272   inflate().
275extern int inflate OF((z_stream *strm, int flush));
277  Performs one or both of the following actions:
279  - Decompress more input starting at next_in and update next_in and avail_in
280    accordingly. If not all input can be processed (because there is not
281    enough room in the output buffer), next_in is updated and processing
282    will resume at this point for the next call of inflate().
284  - Provide more output starting at next_out and update next_out and avail_out
285    accordingly.  inflate() always provides as much output as possible
286    (until there is no more input data or no more space in the output buffer).
288  Before the call of inflate(), the application should ensure that at least
289  one of the actions is possible, by providing more input and/or consuming
290  more output, and updating the next_* and avail_* values accordingly.
291  The application can consume the uncompressed output when it wants, for
292  example when the output buffer is full (avail_out == 0), or after each
293  call of inflate().
295    If the parameter flush is set to Z_PARTIAL_FLUSH or Z_PACKET_FLUSH,
296  inflate flushes as much output as possible to the output buffer. The
297  flushing behavior of inflate is not specified for values of the flush
298  parameter other than Z_PARTIAL_FLUSH, Z_PACKET_FLUSH or Z_FINISH, but the
299  current implementation actually flushes as much output as possible
300  anyway.  For Z_PACKET_FLUSH, inflate checks that once all the input data
301  has been consumed, it is expecting to see the length field of a stored
302  block; if not, it returns Z_DATA_ERROR.
304    inflate() should normally be called until it returns Z_STREAM_END or an
305  error. However if all decompression is to be performed in a single step
306  (a single call of inflate), the parameter flush should be set to
307  Z_FINISH. In this case all pending input is processed and all pending
308  output is flushed; avail_out must be large enough to hold all the
309  uncompressed data. (The size of the uncompressed data may have been saved
310  by the compressor for this purpose.) The next operation on this stream must
311  be inflateEnd to deallocate the decompression state. The use of Z_FINISH
312  is never required, but can be used to inform inflate that a faster routine
313  may be used for the single inflate() call.
315    inflate() returns Z_OK if some progress has been made (more input
316  processed or more output produced), Z_STREAM_END if the end of the
317  compressed data has been reached and all uncompressed output has been
318  produced, Z_DATA_ERROR if the input data was corrupted, Z_STREAM_ERROR if
319  the stream structure was inconsistent (for example if next_in or next_out
320  was NULL), Z_MEM_ERROR if there was not enough memory, Z_BUF_ERROR if no
321  progress is possible or if there was not enough room in the output buffer
322  when Z_FINISH is used. In the Z_DATA_ERROR case, the application may then
323  call inflateSync to look for a good compression block.  */
325extern int inflateEnd OF((z_stream *strm));
327     All dynamically allocated data structures for this stream are freed.
328   This function discards any unprocessed input and does not flush any
329   pending output.
331     inflateEnd returns Z_OK if success, Z_STREAM_ERROR if the stream state
332   was inconsistent. In the error case, msg may be set but then points to a
333   static string (which must not be deallocated).
336                        /* advanced functions */
338extern int inflateInit2 OF((z_stream *strm,
339                            int  windowBits));
341     This is another version of inflateInit with more compression options. The
342   fields next_out, zalloc and zfree must be initialized before by the caller.
344     The windowBits parameter is the base two logarithm of the maximum window
345   size (the size of the history buffer).  It should be in the range 8..15 for
346   this version of the library (the value 16 will be allowed soon). The
347   default value is 15 if inflateInit is used instead. If a compressed stream
348   with a larger window size is given as input, inflate() will return with
349   the error code Z_DATA_ERROR instead of trying to allocate a larger window.
351     If next_out is not null, the library will use this buffer for the history
352   buffer; the buffer must either be large enough to hold the entire output
353   data, or have at least 1<<windowBits bytes.  If next_out is null, the
354   library will allocate its own buffer (and leave next_out null). next_in
355   need not be provided here but must be provided by the application for the
356   next call of inflate().
358     If the history buffer is provided by the application, next_out must
359   never be changed by the application since the decompressor maintains
360   history information inside this buffer from call to call; the application
361   can only reset next_out to the beginning of the history buffer when
362   avail_out is zero and all output has been consumed.
364      inflateInit2 returns Z_OK if success, Z_MEM_ERROR if there was
365   not enough memory, Z_STREAM_ERROR if a parameter is invalid (such as
366   windowBits < 8). msg is set to null if there is no error message.
367   inflateInit2 does not perform any decompression: this will be done by
368   inflate().
371extern int inflateSync OF((z_stream *strm));
373    Skips invalid compressed data until the special marker (see deflate()
374  above) can be found, or until all available input is skipped. No output
375  is provided.
377    inflateSync returns Z_OK if the special marker has been found, Z_BUF_ERROR
378  if no more input was provided, Z_DATA_ERROR if no marker has been found,
379  or Z_STREAM_ERROR if the stream structure was inconsistent. In the success
380  case, the application may save the current current value of total_in which
381  indicates where valid compressed data was found. In the error case, the
382  application may repeatedly call inflateSync, providing more input each time,
383  until success or end of the input data.
386extern int inflateReset OF((z_stream *strm));
388     This function is equivalent to inflateEnd followed by inflateInit,
389   but does not free and reallocate all the internal decompression state.
390   The stream will keep attributes that may have been set by inflateInit2.
392      inflateReset returns Z_OK if success, or Z_STREAM_ERROR if the source
393   stream state was inconsistent (such as zalloc or state being NULL).
396extern int inflateIncomp OF((z_stream *strm));
398     This function adds the data at next_in (avail_in bytes) to the output
399   history without performing any output.  There must be no pending output,
400   and the decompressor must be expecting to see the start of a block.
401   Calling this function is equivalent to decompressing a stored block
402   containing the data at next_in (except that the data is not output).
405                        /* checksum functions */
408     This function is not related to compression but is exported
409   anyway because it might be useful in applications using the
410   compression library.
413extern uLong adler32 OF((uLong adler, Bytef *buf, uInt len));
416     Update a running Adler-32 checksum with the bytes buf[0..len-1] and
417   return the updated checksum. If buf is NULL, this function returns
418   the required initial value for the checksum.
419   An Adler-32 checksum is almost as reliable as a CRC32 but can be computed
420   much faster. Usage example:
422     uLong adler = adler32(0L, Z_NULL, 0);
424     while (read_buffer(buffer, length) != EOF) {
425       adler = adler32(adler, buffer, length);
426     }
427     if (adler != original_adler) error();
430#ifndef _Z_UTIL_H
431    struct internal_state {int dummy;}; /* hack for buggy compilers */
434#endif /* _ZLIB_H */
Note: See TracBrowser for help on using the repository browser.