source: rtems/bsps/powerpc/include/ictrl.h @ d7c232f

5
Last change on this file since d7c232f was 2afb22b, checked in by Chris Johns <chrisj@…>, on Dec 23, 2017 at 7:18:56 AM

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 1.8 KB
Line 
1#ifndef _ICTRL_H
2#define _ICTRL_H
3
4/*
5 * mpc505/509 external interrupt controller management.
6 *
7 * FIXME: should be somehow merged into general RTEMS interrupt
8 * management code.
9 */
10
11#ifdef __cplusplus
12extern "C" {
13#endif
14
15#define _SIU_IRQENABLE  ((unsigned long volatile *const)0x8007EFA8)
16#define _SIU_IRQPEND    ((unsigned long volatile *const)0x8007EFA0)
17
18/* Interrupt masks. */
19enum {
20  IMASK_EXT0  = 0x80000000,
21  IMASK_EXT1  = 0x20000000,
22  IMASK_EXT2  = 0x08000000,
23  IMASK_EXT3  = 0x02000000,
24  IMASK_EXT4  = 0x00800000,
25  IMASK_EXT5  = 0x00200000,
26  IMASK_EXT6  = 0x00080000,
27  IMASK_ALL   = IMASK_EXT0 | IMASK_EXT1 | IMASK_EXT2 | IMASK_EXT3 |
28                IMASK_EXT4 | IMASK_EXT5 | IMASK_EXT6
29};
30
31/* Interrupt numbers. */
32typedef enum {
33  IRQ_EXT0,
34  IRQ_EXT1,
35  IRQ_EXT2,
36  IRQ_EXT3,
37  IRQ_EXT4,
38  IRQ_EXT5,
39  IRQ_EXT6,
40  NUM_IRQS
41} ExtInt;
42
43/* Type of external interrupt handlers */
44typedef void (*ExtIsrHandler) (void);
45
46/* Initialization. Must be called once after RTEMS interrupts sybsystem
47   is initiailized. 'predriver_hook' is one of such places. */
48extern void extIsrInit( void );
49
50/* Set interrupt handler 'handler' for external interrupt number
51   'interrupt'. */
52extern void extIrqSetHandler(ExtInt interrupt, ExtIsrHandler handler);
53
54/* Check is external interrupt 'irq' (IMASK_XXXX) is pended. */
55#define extIrqIsSet(irq) \
56  (*_SIU_IRQPEND & (irq))
57
58/* Enable external interrupt 'irq' (IMASK_XXXX) processing. */
59#define extIrqEnable(irq) \
60  (*_SIU_IRQENABLE |= (irq))
61
62/* Disable external interrupt 'irq' (IMASK_XXXX) processing. */
63#define extIrqDisable(irq) \
64  (*_SIU_IRQENABLE &= ~(irq))
65
66/* Check if external interrupt 'irq' (IMASK_XXXX) processing is
67   enabled. */
68#define extIrqGetEnable \
69  (*_SIU_IRQENABLE)
70
71#ifdef __cplusplus
72}
73#endif
74
75#endif /* _ICTRL_H */
Note: See TracBrowser for help on using the repository browser.