source: rtems/bsps/powerpc/haleakala/include/bsp.h @ 01da0ac

5
Last change on this file since 01da0ac was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 2.5 KB
Line 
1/*  bsp.h
2 *
3 *  Generic 405EX bsp.h
4 *  derived from virtex/include/bsp.h
5 *  by Michael Hamel ADInstruments Ltd 2008
6 *
7 * derived from helas403/include/bsp.h:
8 *  Id: bsp.h,v 1.4 2001/06/18 17:01:48 joel Exp
9 *  Author:  Thomas Doerfler <td@imd.m.isar.de>
10 *              IMD Ingenieurbuero fuer Microcomputertechnik
11 *
12 *  COPYRIGHT (c) 1998 by IMD
13 *
14 *  Changes from IMD are covered by the original distributions terms.
15 *  This file has been derived from the papyrus BSP.
16 *
17 *  Author:  Andrew Bray <andy@i-cubed.co.uk>
18 *
19 *  COPYRIGHT (c) 1995 by i-cubed ltd.
20 *
21 *  To anyone who acknowledges that this file is provided "AS IS"
22 *  without any express or implied warranty:
23 *      permission to use, copy, modify, and distribute this file
24 *      for any purpose is hereby granted without fee, provided that
25 *      the above copyright notice and this notice appears in all
26 *      copies, and that the name of i-cubed limited not be used in
27 *      advertising or publicity pertaining to distribution of the
28 *      software without specific, written prior permission.
29 *      i-cubed limited makes no representations about the suitability
30 *      of this software for any purpose.
31 *
32 *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/include/bsp.h
33 *
34 *  COPYRIGHT (c) 1989-1999.
35 *  On-Line Applications Research Corporation (OAR).
36 *
37 *  The license and distribution terms for this file may be
38 *  found in the file LICENSE in this distribution or at
39 *  http://www.rtems.org/license/LICENSE.
40 *
41 *
42 *
43 */
44
45#ifndef LIBBSP_POWERPC_HALEAKALA_BSP_H
46#define LIBBSP_POWERPC_HALEAKALA_BSP_H
47
48#include <bspopts.h>
49
50#ifdef ASM
51
52
53  /* Definition of where to store registers in alignment handler */
54  #define ALIGN_REGS 0x0140
55
56#else
57
58  #include <rtems.h>
59  #include <libcpu/io.h>
60  #include <bsp/irq.h>
61  #include <bsp/vectors.h>
62  #include <bsp/default-initial-extension.h>
63
64  #ifdef __cplusplus
65  extern "C" {
66  #endif
67
68  /* Network Defines */
69  #define RTEMS_BSP_NETWORK_DRIVER_NAME     "eth0"
70
71  struct rtems_bsdnet_ifconfig;
72  int rtems_emac_driver_attach(struct rtems_bsdnet_ifconfig* config, int attaching);
73  #define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_emac_driver_attach
74
75  #define BSP_UART_IOBASE_COM1  0xEF600200    /* PPC405EX */
76  #define BSP_UART_IOBASE_COM2  0xEF600300
77
78  #define BSP_CONSOLE_PORT    BSP_UART_COM1    /* console */
79
80  #define BSP_UART_BAUD_BASE    (11059200 / 16)    /* Kilauea ext clock, max speed */
81
82  #ifdef __cplusplus
83  }
84  #endif
85#endif /* ASM */
86
87#endif /* BSP_H */
Note: See TracBrowser for help on using the repository browser.