1 | /* |
---|
2 | * This routine does the bulk of the system initialization. |
---|
3 | */ |
---|
4 | |
---|
5 | /* |
---|
6 | * COPYRIGHT (c) 1989-1998. |
---|
7 | * On-Line Applications Research Corporation (OAR). |
---|
8 | * |
---|
9 | * The license and distribution terms for this file may be |
---|
10 | * found in the file LICENSE in this distribution or at |
---|
11 | * http://www.OARcorp.com/rtems/license.html. |
---|
12 | * |
---|
13 | * Modified to support the MCP750. |
---|
14 | * Modifications Copyright (C) 1999 Eric Valette. valette@crf.canon.fr |
---|
15 | * |
---|
16 | * Modified to support the Synergy VGM & Motorola PowerPC boards. |
---|
17 | * (C) by Till Straumann, <strauman@slac.stanford.edu>, 2002, 2004, 2005 |
---|
18 | * |
---|
19 | * Modified to support the mvme5500 BSP |
---|
20 | * (C) by Kate Feng <feng1@bnl.gov>, 2003, 2004 |
---|
21 | * under the contract DE-AC02-98CH10886 with the Deaprtment of Energy |
---|
22 | * |
---|
23 | * T. Straumann: 2005-2007; stolen again for 'beatnik'... |
---|
24 | */ |
---|
25 | #include <string.h> |
---|
26 | #include <stdlib.h> |
---|
27 | #include <ctype.h> |
---|
28 | |
---|
29 | #include <rtems/libio.h> |
---|
30 | #include <rtems/libcsupport.h> |
---|
31 | #include <rtems/bspIo.h> |
---|
32 | #include <rtems/counter.h> |
---|
33 | #include <rtems/powerpc/powerpc.h> |
---|
34 | #include <rtems/sysinit.h> |
---|
35 | /*#include <bsp/consoleIo.h>*/ |
---|
36 | #include <libcpu/spr.h> /* registers.h is included here */ |
---|
37 | #include <bsp.h> |
---|
38 | #include <bsp/bootcard.h> |
---|
39 | #include <bsp/uart.h> |
---|
40 | #include <bsp/pci.h> |
---|
41 | #include <bsp/gtreg.h> |
---|
42 | #include <bsp/gt_timer.h> |
---|
43 | #include <libcpu/bat.h> |
---|
44 | #include <libcpu/pte121.h> |
---|
45 | #include <libcpu/cpuIdent.h> |
---|
46 | #include <bsp/vectors.h> |
---|
47 | #include <bsp/VME.h> |
---|
48 | #include <bsp/vpd.h> |
---|
49 | |
---|
50 | #define SHOW_MORE_INIT_SETTINGS |
---|
51 | |
---|
52 | BSP_output_char_function_type BSP_output_char = BSP_output_char_via_serial; |
---|
53 | BSP_polling_getchar_function_type BSP_poll_char = NULL; |
---|
54 | |
---|
55 | extern Triv121PgTbl BSP_pgtbl_setup(unsigned int *); |
---|
56 | extern void BSP_pgtbl_activate(Triv121PgTbl); |
---|
57 | extern void BSP_motload_pci_fixup(void); |
---|
58 | |
---|
59 | extern unsigned long __rtems_end[]; |
---|
60 | |
---|
61 | /* We really shouldn't use these since MMUoff also sets IP; |
---|
62 | * nevertheless, during early init I don't care for now |
---|
63 | */ |
---|
64 | extern void MMUoff(void); |
---|
65 | extern void MMUon(void); |
---|
66 | |
---|
67 | extern uint32_t probeMemoryEnd(void); |
---|
68 | |
---|
69 | SPR_RW(SPRG0) |
---|
70 | SPR_RW(SPRG1) |
---|
71 | SPR_RO(HID1) |
---|
72 | |
---|
73 | /* Table of PLL multipliers for 7455/7457: |
---|
74 | 01000 2 00010 7.5 00000 11.5 00001 17 |
---|
75 | 10000 3 11000 8 10111 12 00101 18 |
---|
76 | 10100 4 01100 8.5 11111 12.5 00111 20 |
---|
77 | 10110 5 01111 9 01011 13 01001 21 |
---|
78 | 10010 5.5 01110 9.5 11100 13.5 01101 24 |
---|
79 | 11010 6 10101 10 11001 14 11101 28 |
---|
80 | 01010 6.5 10001 10.5 00011 15 00110 bypass |
---|
81 | 00100 7 10011 11 11011 16 11110 off |
---|
82 | */ |
---|
83 | |
---|
84 | /* Sorted according to CFG bits and multiplied by 2 it looks |
---|
85 | * like this (note that this is in sequential order, not |
---|
86 | * tabulated as above) |
---|
87 | */ |
---|
88 | signed char mpc7450PllMultByTwo[32] = { |
---|
89 | 23, 34, 15, 30, |
---|
90 | 14, 36, 2/*bypass*/, 40, |
---|
91 | 4, 42, 13, 26, |
---|
92 | 17, 48, 19, 18, |
---|
93 | 6, 21, 11, 22, |
---|
94 | 8, 20, 10, 24, |
---|
95 | 16, 28, 12, 32, |
---|
96 | 27, 56, 0/*off*/, 25, |
---|
97 | }; |
---|
98 | |
---|
99 | uint32_t bsp_clicks_per_usec = 0; |
---|
100 | |
---|
101 | /* |
---|
102 | * Total memory using probing. |
---|
103 | */ |
---|
104 | unsigned int BSP_mem_size; |
---|
105 | |
---|
106 | /* |
---|
107 | * PCI Bus Frequency |
---|
108 | */ |
---|
109 | unsigned int BSP_bus_frequency = 0xdeadbeef; |
---|
110 | /* |
---|
111 | * processor clock frequency |
---|
112 | */ |
---|
113 | unsigned int BSP_processor_frequency = 0xdeadbeef; |
---|
114 | |
---|
115 | /* |
---|
116 | * Time base divisior (bus freq / TB clock) |
---|
117 | */ |
---|
118 | unsigned int BSP_time_base_divisor = 4000; /* most 604+ CPUs seem to use this */ |
---|
119 | |
---|
120 | /* Board identification string */ |
---|
121 | char BSP_productIdent[20] = {0}; |
---|
122 | char BSP_serialNumber[20] = {0}; |
---|
123 | |
---|
124 | /* VPD appends an extra char -- what for ? */ |
---|
125 | char BSP_enetAddr0[7] = {0}; |
---|
126 | char BSP_enetAddr1[7] = {0}; |
---|
127 | |
---|
128 | char *rtems_progname; |
---|
129 | |
---|
130 | #define CMDLINE_BUF_SIZE 2048 |
---|
131 | |
---|
132 | static char cmdline_buf[CMDLINE_BUF_SIZE]; |
---|
133 | char *BSP_commandline_string = cmdline_buf; |
---|
134 | |
---|
135 | /* this routine is called early and must be safe with a not properly |
---|
136 | * aligned stack |
---|
137 | */ |
---|
138 | char *save_boot_params( |
---|
139 | void *r3, |
---|
140 | void *r4, |
---|
141 | void *r5, |
---|
142 | char *cmdline_start, |
---|
143 | char *cmdline_end |
---|
144 | ) |
---|
145 | { |
---|
146 | int i=cmdline_end-cmdline_start; |
---|
147 | if ( i >= CMDLINE_BUF_SIZE ) |
---|
148 | i = CMDLINE_BUF_SIZE-1; |
---|
149 | else if ( i < 0 ) |
---|
150 | i = 0; |
---|
151 | memmove(cmdline_buf, cmdline_start, i); |
---|
152 | cmdline_buf[i]=0; |
---|
153 | return cmdline_buf; |
---|
154 | } |
---|
155 | |
---|
156 | static BSP_BoardType board_type = Unknown; |
---|
157 | |
---|
158 | BSP_BoardType |
---|
159 | BSP_getBoardType( void ) |
---|
160 | { |
---|
161 | return board_type; |
---|
162 | } |
---|
163 | |
---|
164 | uint32_t _CPU_Counter_frequency(void) |
---|
165 | { |
---|
166 | return BSP_bus_frequency / (BSP_time_base_divisor / 1000); |
---|
167 | } |
---|
168 | |
---|
169 | static void bsp_early( void ) |
---|
170 | { |
---|
171 | unsigned char *stack; |
---|
172 | char *chpt; |
---|
173 | |
---|
174 | Triv121PgTbl pt=0; |
---|
175 | |
---|
176 | VpdBufRec vpdData [] = { |
---|
177 | { key: ProductIdent, instance: 0, buf: BSP_productIdent, buflen: sizeof(BSP_productIdent) - 1 }, |
---|
178 | { key: SerialNumber, instance: 0, buf: BSP_serialNumber, buflen: sizeof(BSP_serialNumber) - 1 }, |
---|
179 | { key: CpuClockHz, instance: 0, buf: &BSP_processor_frequency, buflen: sizeof(BSP_processor_frequency) }, |
---|
180 | { key: BusClockHz, instance: 0, buf: &BSP_bus_frequency, buflen: sizeof(BSP_bus_frequency) }, |
---|
181 | { key: EthernetAddr, instance: 0, buf: BSP_enetAddr0, buflen: sizeof(BSP_enetAddr0) }, |
---|
182 | { key: EthernetAddr, instance: 1, buf: BSP_enetAddr1, buflen: sizeof(BSP_enetAddr1) }, |
---|
183 | VPD_END |
---|
184 | }; |
---|
185 | |
---|
186 | /* T. Straumann: 4/2005 |
---|
187 | * |
---|
188 | * Need to map the system registers early, so we can printk... |
---|
189 | * (otherwise we silently die) |
---|
190 | */ |
---|
191 | /* map the PCI 0, 1 Domain I/O space, GT64260B registers |
---|
192 | * and the reserved area so that the size is the power of 2. |
---|
193 | */ |
---|
194 | setdbat(7, BSP_DEV_AND_PCI_IO_BASE, BSP_DEV_AND_PCI_IO_BASE, BSP_DEV_AND_PCI_IO_SIZE, IO_PAGE); |
---|
195 | |
---|
196 | /* Intersperse messages with actions to help locate problems */ |
---|
197 | printk("-----------------------------------------\n"); |
---|
198 | |
---|
199 | /* |
---|
200 | * Get CPU identification dynamically. Note that the get_ppc_cpu_type() & friends functions |
---|
201 | * store the result in global variables so that it can be used latter... |
---|
202 | * This also verifies that we run on a known CPU. |
---|
203 | */ |
---|
204 | get_ppc_cpu_type(); |
---|
205 | get_ppc_cpu_revision(); |
---|
206 | |
---|
207 | /* Make sure we detect a known host bridge */ |
---|
208 | BSP_getDiscoveryVersion(/* assert detection */ 1); |
---|
209 | |
---|
210 | printk("Welcome to RTEMS %s\n", rtems_get_version_string() ); |
---|
211 | |
---|
212 | /* Leave all caches as MotLoad left them. Seems to be fine */ |
---|
213 | |
---|
214 | /* |
---|
215 | * the initial stack has aready been set to this value in start.S |
---|
216 | * so there is no need to set it in r1 again... It is just for info |
---|
217 | * so that it can be printed without accessing R1. |
---|
218 | */ |
---|
219 | __asm__ volatile("mr %0, 1":"=r"(stack)); |
---|
220 | |
---|
221 | /* tag the bottom (T. Straumann 6/36/2001 <strauman@slac.stanford.edu>) */ |
---|
222 | |
---|
223 | *((uint32_t *)stack) = 0; |
---|
224 | |
---|
225 | ppc_exc_initialize(); |
---|
226 | |
---|
227 | printk("CPU: %s\n", get_ppc_cpu_type_name(current_ppc_cpu)); |
---|
228 | |
---|
229 | /* |
---|
230 | * Initialize RTEMS IRQ system |
---|
231 | */ |
---|
232 | BSP_rtems_irq_mng_init(0); |
---|
233 | |
---|
234 | BSP_vpdRetrieveFields(vpdData); |
---|
235 | |
---|
236 | if ( !strncmp(BSP_productIdent,"MVME5500",8) ) |
---|
237 | board_type = MVME5500; |
---|
238 | else if ( !strncmp(BSP_productIdent,"MVME6100",8) ) |
---|
239 | board_type = MVME6100; |
---|
240 | |
---|
241 | printk("Board Type: %s (S/N %s)\n", |
---|
242 | BSP_productIdent[0] ? BSP_productIdent : "n/a", |
---|
243 | BSP_serialNumber[0] ? BSP_serialNumber : "n/a"); |
---|
244 | |
---|
245 | if ( 0xdeadbeef == BSP_bus_frequency ) { |
---|
246 | BSP_bus_frequency = 133333333; |
---|
247 | printk("Bus Clock Freq NOT FOUND in VPD; using %10u Hz\n", |
---|
248 | BSP_bus_frequency); |
---|
249 | } else { |
---|
250 | printk("Bus Clock Freq: %10u Hz\n", |
---|
251 | BSP_bus_frequency); |
---|
252 | } |
---|
253 | |
---|
254 | if ( 0xdeadbeef == BSP_processor_frequency ) { |
---|
255 | BSP_processor_frequency = BSP_bus_frequency/2; |
---|
256 | BSP_processor_frequency *= mpc7450PllMultByTwo[ (_read_HID1() >> (31-19)) & 31 ]; |
---|
257 | } |
---|
258 | printk("CPU Clock Freq: %10u Hz\n", BSP_processor_frequency); |
---|
259 | |
---|
260 | /* probe real memory size; if it's more than 256M we can't currently access it |
---|
261 | * since at this point only BAT-0 maps 0..256M |
---|
262 | */ |
---|
263 | BSP_mem_size = probeMemoryEnd(); |
---|
264 | |
---|
265 | if ( (chpt = strstr(BSP_commandline_string,"MEMSZ=")) ) { |
---|
266 | char *endp; |
---|
267 | uint32_t sz; |
---|
268 | chpt+=6 /* strlen("MEMSZ=") */; |
---|
269 | sz = strtoul(chpt, &endp, 0); |
---|
270 | if ( endp != chpt ) |
---|
271 | BSP_mem_size = sz; |
---|
272 | } |
---|
273 | |
---|
274 | printk("Memory: %10u bytes\n", BSP_mem_size); |
---|
275 | |
---|
276 | if ( BSP_mem_size > 0x10000000 ) { |
---|
277 | uint32_t s; |
---|
278 | if ( BSP_mem_size > 0x80000000 ) { |
---|
279 | BSP_mem_size = 0x80000000; |
---|
280 | printk("Memory clipped to 0x%08x for now, sorry\n", BSP_mem_size); |
---|
281 | } |
---|
282 | for ( s = 0x20000000; s < BSP_mem_size ; s<<=1) |
---|
283 | ; |
---|
284 | MMUoff(); |
---|
285 | /* since it's currently in use we must first surrender it */ |
---|
286 | setdbat(0, 0, 0, 0, 0); |
---|
287 | setdbat(0, 0, 0, s, _PAGE_RW); |
---|
288 | MMUon(); |
---|
289 | } |
---|
290 | |
---|
291 | printk("-----------------------------------------\n"); |
---|
292 | |
---|
293 | /* Maybe not setup yet because of the warning message */ |
---|
294 | |
---|
295 | /* Allocate and set up the page table mappings |
---|
296 | * This is only available on >604 CPUs. |
---|
297 | * |
---|
298 | * NOTE: This setup routine may modify the available memory |
---|
299 | * size. It is essential to call it before |
---|
300 | * calculating the workspace etc. |
---|
301 | */ |
---|
302 | pt = BSP_pgtbl_setup(&BSP_mem_size); |
---|
303 | if (!pt) |
---|
304 | printk("WARNING: unable to setup page tables.\n"); |
---|
305 | |
---|
306 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
307 | printk("Now BSP_mem_size = 0x%x\n",BSP_mem_size); |
---|
308 | #endif |
---|
309 | |
---|
310 | /* |
---|
311 | * Set up our hooks |
---|
312 | */ |
---|
313 | |
---|
314 | bsp_clicks_per_usec = BSP_bus_frequency/(BSP_time_base_divisor * 1000); |
---|
315 | |
---|
316 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
317 | printk( |
---|
318 | "Configuration.work_space_size = %x\n", |
---|
319 | rtems_configuration_get_work_space_size() |
---|
320 | ); |
---|
321 | #endif |
---|
322 | |
---|
323 | /* Activate the page table mappings only after |
---|
324 | * initializing interrupts because the irq_mng_init() |
---|
325 | * routine needs to modify the text |
---|
326 | */ |
---|
327 | if ( pt ) { |
---|
328 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
329 | printk("Page table setup finished; will activate it NOW...\n"); |
---|
330 | #endif |
---|
331 | BSP_pgtbl_activate(pt); |
---|
332 | } |
---|
333 | |
---|
334 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
335 | printk("Going to start PCI buses scanning and initialization\n"); |
---|
336 | #endif |
---|
337 | BSP_pci_initialize(); |
---|
338 | |
---|
339 | /* need to tweak the motload setup */ |
---|
340 | BSP_motload_pci_fixup(); |
---|
341 | |
---|
342 | /* map 512M, 256 for PCI 256 for VME */ |
---|
343 | setdbat(5,BSP_PCI_HOSE0_MEM_BASE, BSP_PCI_HOSE0_MEM_BASE, BSP_PCI_HOSE0_MEM_SIZE, IO_PAGE); |
---|
344 | setdbat(6,BSP_PCI_HOSE1_MEM_BASE, BSP_PCI_HOSE1_MEM_BASE, 0x10000000, IO_PAGE); |
---|
345 | |
---|
346 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
347 | printk("Number of PCI buses found is : %d\n", pci_bus_count()); |
---|
348 | #endif |
---|
349 | |
---|
350 | /* |
---|
351 | * Initialize hardware timer facility (not used by BSP itself) |
---|
352 | * Needs PCI to identify discovery version... |
---|
353 | */ |
---|
354 | BSP_timers_initialize(); |
---|
355 | |
---|
356 | #ifdef SHOW_MORE_INIT_SETTINGS |
---|
357 | printk("MSR 0x%lx \n", _read_MSR()); |
---|
358 | printk("Exit from bspstart\n"); |
---|
359 | #endif |
---|
360 | } |
---|
361 | |
---|
362 | RTEMS_SYSINIT_ITEM( |
---|
363 | bsp_early, |
---|
364 | RTEMS_SYSINIT_BSP_EARLY, |
---|
365 | RTEMS_SYSINIT_ORDER_MIDDLE |
---|
366 | ); |
---|
367 | |
---|
368 | void bsp_start( void ) |
---|
369 | { |
---|
370 | /* Initialization was done by bsp_early() */ |
---|
371 | } |
---|
372 | |
---|
373 | RTEMS_SYSINIT_ITEM( |
---|
374 | BSP_vme_config, |
---|
375 | RTEMS_SYSINIT_BSP_PRE_DRIVERS, |
---|
376 | RTEMS_SYSINIT_ORDER_MIDDLE |
---|
377 | ); |
---|