1 | /* |
---|
2 | * Multi UART console serial I/O. |
---|
3 | * |
---|
4 | * TO DO: Add DMA input/output |
---|
5 | */ |
---|
6 | |
---|
7 | #include <stdio.h> |
---|
8 | #include <fcntl.h> |
---|
9 | #include <termios.h> |
---|
10 | #include <malloc.h> |
---|
11 | |
---|
12 | #include <rtems/libio.h> |
---|
13 | #include <rtems/console.h> |
---|
14 | #include <rtems/termiostypes.h> |
---|
15 | #include <bsp.h> |
---|
16 | |
---|
17 | #include <rtems/bspIo.h> |
---|
18 | |
---|
19 | #define UART_INTC0_IRQ_VECTOR(x) (64+13+(x)) |
---|
20 | |
---|
21 | #define MCF_UART_USR_ERROR ( MCF_UART_USR_RB | \ |
---|
22 | MCF_UART_USR_FE | \ |
---|
23 | MCF_UART_USR_PE | \ |
---|
24 | MCF_UART_USR_OE ) |
---|
25 | |
---|
26 | static ssize_t IntUartPollWrite(int minor, const char *buf, size_t len); |
---|
27 | static ssize_t IntUartInterruptWrite(int minor, const char *buf, size_t len); |
---|
28 | |
---|
29 | #define MAX_UART_INFO 3 |
---|
30 | #define RX_BUFFER_SIZE 512 |
---|
31 | |
---|
32 | struct IntUartInfoStruct |
---|
33 | { |
---|
34 | int iomode; |
---|
35 | volatile int uimr; |
---|
36 | int baud; |
---|
37 | int databits; |
---|
38 | int parity; |
---|
39 | int stopbits; |
---|
40 | int hwflow; |
---|
41 | int rx_in; |
---|
42 | int rx_out; |
---|
43 | char rx_buffer[RX_BUFFER_SIZE]; |
---|
44 | void *ttyp; |
---|
45 | }; |
---|
46 | |
---|
47 | struct IntUartInfoStruct IntUartInfo[MAX_UART_INFO]; |
---|
48 | |
---|
49 | /*************************************************************************** |
---|
50 | Function : IntUartSet |
---|
51 | |
---|
52 | Description : This updates the hardware UART settings. |
---|
53 | ***************************************************************************/ |
---|
54 | static void |
---|
55 | IntUartSet(int minor, int baud, int databits, int parity, int stopbits, |
---|
56 | int hwflow) |
---|
57 | { |
---|
58 | int divisor; |
---|
59 | uint32_t clock_speed; |
---|
60 | uint8_t umr1 = 0; |
---|
61 | uint8_t umr2 = 0; |
---|
62 | struct IntUartInfoStruct *info = &IntUartInfo[minor]; |
---|
63 | int level; |
---|
64 | |
---|
65 | rtems_interrupt_disable(level); |
---|
66 | |
---|
67 | /* disable interrupts, clear RTS line, and disable the UARTS */ |
---|
68 | MCF_UART_UIMR(minor) = 0; |
---|
69 | MCF_UART_UOP0(minor) = 1; |
---|
70 | MCF_UART_UCR(minor) = (MCF_UART_UCR_TX_DISABLED | MCF_UART_UCR_RX_DISABLED); |
---|
71 | |
---|
72 | /* save the current values */ |
---|
73 | info->uimr = 0; |
---|
74 | info->baud = baud; |
---|
75 | info->databits = databits; |
---|
76 | info->parity = parity; |
---|
77 | info->stopbits = stopbits; |
---|
78 | info->hwflow = hwflow; |
---|
79 | |
---|
80 | clock_speed = bsp_get_CPU_clock_speed(); |
---|
81 | /* determine the baud divisor value */ |
---|
82 | divisor = ((clock_speed) / (32 * baud)); |
---|
83 | if (divisor < 2) |
---|
84 | divisor = 2; |
---|
85 | |
---|
86 | /* check to see if doing hardware flow control */ |
---|
87 | if (hwflow) { |
---|
88 | /* set hardware flow options */ |
---|
89 | umr1 |= MCF_UART_UMR_RXRTS; |
---|
90 | umr2 |= MCF_UART_UMR_TXCTS; |
---|
91 | } |
---|
92 | |
---|
93 | /* determine the new umr values */ |
---|
94 | umr1 |= (parity | databits); |
---|
95 | umr2 |= (stopbits); |
---|
96 | |
---|
97 | /* reset the uart */ |
---|
98 | MCF_UART_UCR(minor) = MCF_UART_UCR_RESET_ERROR; |
---|
99 | MCF_UART_UCR(minor) = MCF_UART_UCR_RESET_RX; |
---|
100 | MCF_UART_UCR(minor) = MCF_UART_UCR_RESET_TX; |
---|
101 | |
---|
102 | /* reset the uart mode register and update values */ |
---|
103 | MCF_UART_UCR(minor) = MCF_UART_UCR_RESET_MR; |
---|
104 | MCF_UART_UMR(minor) = umr1; |
---|
105 | MCF_UART_UMR(minor) = umr2; |
---|
106 | |
---|
107 | /* set the baud rate values */ |
---|
108 | MCF_UART_UCSR(minor) = |
---|
109 | (MCF_UART_UCSR_RCS_SYS_CLK | MCF_UART_UCSR_TCS_SYS_CLK); |
---|
110 | MCF_UART_UBG1(minor) = (divisor & 0xff00) >> 8; |
---|
111 | MCF_UART_UBG2(minor) = (divisor & 0x00ff); |
---|
112 | |
---|
113 | /* enable the uart */ |
---|
114 | MCF_UART_UCR(minor) = (MCF_UART_UCR_TX_ENABLED | MCF_UART_UCR_RX_ENABLED); |
---|
115 | |
---|
116 | /* check to see if interrupts need to be enabled */ |
---|
117 | if (info->iomode != TERMIOS_POLLED) { |
---|
118 | /* enable rx interrupts */ |
---|
119 | info->uimr |= MCF_UART_UIMR_RXRDY_FU; |
---|
120 | MCF_UART_UIMR(minor) = info->uimr; |
---|
121 | } |
---|
122 | |
---|
123 | /* check to see if doing hardware flow control */ |
---|
124 | if (hwflow) { |
---|
125 | /* assert the RTS line */ |
---|
126 | MCF_UART_UOP1(minor) = 1; |
---|
127 | } |
---|
128 | |
---|
129 | rtems_interrupt_enable(level); |
---|
130 | |
---|
131 | } |
---|
132 | |
---|
133 | /*************************************************************************** |
---|
134 | Function : IntUartSetAttributes |
---|
135 | |
---|
136 | Description : This provides the hardware-dependent portion of tcsetattr(). |
---|
137 | value and sets it. At the moment this just sets the baud rate. |
---|
138 | |
---|
139 | Note: The highest baudrate is 115200 as this stays within |
---|
140 | an error of +/- 5% at 25MHz processor clock |
---|
141 | ***************************************************************************/ |
---|
142 | static int IntUartSetAttributes(int minor, const struct termios *t) |
---|
143 | { |
---|
144 | /* set default index values */ |
---|
145 | int baud = (int) 19200; |
---|
146 | int databits = (int) MCF_UART_UMR_BC_8; |
---|
147 | int parity = (int) MCF_UART_UMR_PM_NONE; |
---|
148 | int stopbits = (int) MCF_UART_UMR_SB_STOP_BITS_1; |
---|
149 | int hwflow = (int) 0; |
---|
150 | struct IntUartInfoStruct *info = &IntUartInfo[minor]; |
---|
151 | |
---|
152 | /* check to see if input is valid */ |
---|
153 | if (t != (const struct termios *) 0) { |
---|
154 | /* determine baud rate index */ |
---|
155 | baud = rtems_termios_baud_to_number(t->c_ospeed); |
---|
156 | |
---|
157 | /* determine data bits */ |
---|
158 | switch (t->c_cflag & CSIZE) { |
---|
159 | case CS5: |
---|
160 | databits = (int) MCF_UART_UMR_BC_5; |
---|
161 | break; |
---|
162 | case CS6: |
---|
163 | databits = (int) MCF_UART_UMR_BC_6; |
---|
164 | break; |
---|
165 | case CS7: |
---|
166 | databits = (int) MCF_UART_UMR_BC_7; |
---|
167 | break; |
---|
168 | case CS8: |
---|
169 | databits = (int) MCF_UART_UMR_BC_8; |
---|
170 | break; |
---|
171 | } |
---|
172 | |
---|
173 | /* determine if parity is enabled */ |
---|
174 | if (t->c_cflag & PARENB) { |
---|
175 | if (t->c_cflag & PARODD) { |
---|
176 | /* odd parity */ |
---|
177 | parity = (int) MCF_UART_UMR_PM_ODD; |
---|
178 | } else { |
---|
179 | /* even parity */ |
---|
180 | parity = (int) MCF_UART_UMR_PM_EVEN; |
---|
181 | } |
---|
182 | } |
---|
183 | |
---|
184 | /* determine stop bits */ |
---|
185 | if (t->c_cflag & CSTOPB) { |
---|
186 | /* two stop bits */ |
---|
187 | stopbits = (int) MCF_UART_UMR_SB_STOP_BITS_2; |
---|
188 | } |
---|
189 | |
---|
190 | /* check to see if hardware flow control */ |
---|
191 | if (t->c_cflag & CRTSCTS) { |
---|
192 | hwflow = 1; |
---|
193 | } |
---|
194 | } |
---|
195 | |
---|
196 | /* check to see if values have changed */ |
---|
197 | if ((baud != info->baud) || |
---|
198 | (databits != info->databits) || |
---|
199 | (parity != info->parity) || |
---|
200 | (stopbits != info->stopbits) || (hwflow != info->hwflow)) { |
---|
201 | |
---|
202 | /* call function to set values */ |
---|
203 | IntUartSet(minor, baud, databits, parity, stopbits, hwflow); |
---|
204 | } |
---|
205 | |
---|
206 | return (RTEMS_SUCCESSFUL); |
---|
207 | |
---|
208 | } |
---|
209 | |
---|
210 | /*************************************************************************** |
---|
211 | Function : IntUartInterruptHandler |
---|
212 | |
---|
213 | Description : This is the interrupt handler for the internal uart. It |
---|
214 | determines which channel caused the interrupt before queueing any received |
---|
215 | chars and dequeueing chars waiting for transmission. |
---|
216 | ***************************************************************************/ |
---|
217 | static rtems_isr IntUartInterruptHandler(rtems_vector_number v) |
---|
218 | { |
---|
219 | unsigned int chan = v - UART_INTC0_IRQ_VECTOR(0); |
---|
220 | struct IntUartInfoStruct *info = &IntUartInfo[chan]; |
---|
221 | |
---|
222 | /* check to see if received data */ |
---|
223 | if (MCF_UART_UISR(chan) & MCF_UART_UISR_RXRDY_FU) { |
---|
224 | /* read data and put into the receive buffer */ |
---|
225 | while (MCF_UART_USR(chan) & MCF_UART_USR_RXRDY) { |
---|
226 | |
---|
227 | if (MCF_UART_USR(chan) & MCF_UART_USR_ERROR) { |
---|
228 | /* clear the error */ |
---|
229 | MCF_UART_UCR(chan) = MCF_UART_UCR_RESET_ERROR; |
---|
230 | } |
---|
231 | /* put data in rx buffer and check for errors */ |
---|
232 | info->rx_buffer[info->rx_in] = MCF_UART_URB(chan); |
---|
233 | |
---|
234 | /* update buffer values */ |
---|
235 | info->rx_in++; |
---|
236 | |
---|
237 | if (info->rx_in >= RX_BUFFER_SIZE) { |
---|
238 | info->rx_in = 0; |
---|
239 | } |
---|
240 | } |
---|
241 | /* Make sure the port has been opened */ |
---|
242 | if (info->ttyp) { |
---|
243 | |
---|
244 | /* check to see if task driven */ |
---|
245 | if (info->iomode == TERMIOS_TASK_DRIVEN) { |
---|
246 | /* notify rx task that rx buffer has data */ |
---|
247 | rtems_termios_rxirq_occured(info->ttyp); |
---|
248 | } else { |
---|
249 | /* Push up the received data */ |
---|
250 | rtems_termios_enqueue_raw_characters(info->ttyp, info->rx_buffer, |
---|
251 | info->rx_in); |
---|
252 | info->rx_in = 0; |
---|
253 | } |
---|
254 | } |
---|
255 | } |
---|
256 | |
---|
257 | /* check to see if data needs to be transmitted */ |
---|
258 | if ((info->uimr & MCF_UART_UIMR_TXRDY) && |
---|
259 | (MCF_UART_UISR(chan) & MCF_UART_UISR_TXRDY)) { |
---|
260 | |
---|
261 | /* disable tx interrupts */ |
---|
262 | info->uimr &= ~MCF_UART_UIMR_TXRDY; |
---|
263 | MCF_UART_UIMR(chan) = info->uimr; |
---|
264 | |
---|
265 | /* tell upper level that character has been sent */ |
---|
266 | if (info->ttyp) |
---|
267 | rtems_termios_dequeue_characters(info->ttyp, 1); |
---|
268 | } |
---|
269 | } |
---|
270 | |
---|
271 | /*************************************************************************** |
---|
272 | Function : IntUartInitialize |
---|
273 | |
---|
274 | Description : This initialises the internal uart hardware for all |
---|
275 | internal uarts. If the internal uart is to be interrupt driven then the |
---|
276 | interrupt vectors are hooked. |
---|
277 | ***************************************************************************/ |
---|
278 | static void IntUartInitialize(void) |
---|
279 | { |
---|
280 | unsigned int chan; |
---|
281 | struct IntUartInfoStruct *info; |
---|
282 | rtems_isr_entry old_handler; |
---|
283 | int level; |
---|
284 | |
---|
285 | for (chan = 0; chan < MAX_UART_INFO; chan++) { |
---|
286 | info = &IntUartInfo[chan]; |
---|
287 | |
---|
288 | info->ttyp = NULL; |
---|
289 | info->rx_in = 0; |
---|
290 | info->rx_out = 0; |
---|
291 | info->baud = -1; |
---|
292 | info->databits = -1; |
---|
293 | info->parity = -1; |
---|
294 | info->stopbits = -1; |
---|
295 | info->hwflow = -1; |
---|
296 | info->iomode = TERMIOS_POLLED; /*polled console io */ |
---|
297 | |
---|
298 | MCF_UART_UACR(chan) = 0; |
---|
299 | MCF_UART_UIMR(chan) = 0; |
---|
300 | if (info->iomode != TERMIOS_POLLED) { |
---|
301 | rtems_interrupt_catch(IntUartInterruptHandler, |
---|
302 | UART_INTC0_IRQ_VECTOR(chan), &old_handler); |
---|
303 | } |
---|
304 | |
---|
305 | /* set uart default values */ |
---|
306 | IntUartSetAttributes(chan, NULL); |
---|
307 | |
---|
308 | /* unmask interrupt */ |
---|
309 | rtems_interrupt_disable(level); |
---|
310 | switch (chan) { |
---|
311 | case 0: |
---|
312 | MCF_INTC0_ICR13 = MCF_INTC_ICR_IL(UART0_IRQ_LEVEL) | |
---|
313 | MCF_INTC_ICR_IP(UART0_IRQ_PRIORITY); |
---|
314 | MCF_INTC0_IMRL &= ~(MCF_INTC_IMRL_MASK13 | MCF_INTC_IMRL_MASKALL); |
---|
315 | break; |
---|
316 | |
---|
317 | case 1: |
---|
318 | MCF_INTC0_ICR14 = MCF_INTC_ICR_IL(UART1_IRQ_LEVEL) | |
---|
319 | MCF_INTC_ICR_IP(UART1_IRQ_PRIORITY); |
---|
320 | MCF_INTC0_IMRL &= ~(MCF_INTC_IMRL_MASK14 | MCF_INTC_IMRL_MASKALL); |
---|
321 | break; |
---|
322 | |
---|
323 | case 2: |
---|
324 | MCF_INTC0_ICR15 = MCF_INTC_ICR_IL(UART2_IRQ_LEVEL) | |
---|
325 | MCF_INTC_ICR_IP(UART2_IRQ_PRIORITY); |
---|
326 | MCF_INTC0_IMRL &= ~(MCF_INTC_IMRL_MASK15 | MCF_INTC_IMRL_MASKALL); |
---|
327 | break; |
---|
328 | } |
---|
329 | rtems_interrupt_enable(level); |
---|
330 | |
---|
331 | } /* of chan loop */ |
---|
332 | |
---|
333 | } /* IntUartInitialise */ |
---|
334 | |
---|
335 | /*************************************************************************** |
---|
336 | Function : IntUartInterruptWrite |
---|
337 | |
---|
338 | Description : This writes a single character to the appropriate uart |
---|
339 | channel. This is either called during an interrupt or in the user's task |
---|
340 | to initiate a transmit sequence. Calling this routine enables Tx |
---|
341 | interrupts. |
---|
342 | ***************************************************************************/ |
---|
343 | static ssize_t IntUartInterruptWrite(int minor, const char *buf, size_t len) |
---|
344 | { |
---|
345 | if (len > 0) { |
---|
346 | /* write out character */ |
---|
347 | MCF_UART_UTB(minor) = *buf; |
---|
348 | |
---|
349 | /* enable tx interrupt */ |
---|
350 | IntUartInfo[minor].uimr |= MCF_UART_UIMR_TXRDY; |
---|
351 | MCF_UART_UIMR(minor) = IntUartInfo[minor].uimr; |
---|
352 | } |
---|
353 | |
---|
354 | return (0); |
---|
355 | } |
---|
356 | |
---|
357 | /*************************************************************************** |
---|
358 | Function : IntUartInterruptOpen |
---|
359 | |
---|
360 | Description : This enables interrupts when the tty is opened. |
---|
361 | ***************************************************************************/ |
---|
362 | static int IntUartInterruptOpen(int major, int minor, void *arg) |
---|
363 | { |
---|
364 | struct IntUartInfoStruct *info = &IntUartInfo[minor]; |
---|
365 | |
---|
366 | /* enable the uart */ |
---|
367 | MCF_UART_UCR(minor) = (MCF_UART_UCR_TX_ENABLED | MCF_UART_UCR_RX_ENABLED); |
---|
368 | |
---|
369 | /* check to see if interrupts need to be enabled */ |
---|
370 | if (info->iomode != TERMIOS_POLLED) { |
---|
371 | /* enable rx interrupts */ |
---|
372 | info->uimr |= MCF_UART_UIMR_RXRDY_FU; |
---|
373 | MCF_UART_UIMR(minor) = info->uimr; |
---|
374 | } |
---|
375 | |
---|
376 | /* check to see if doing hardware flow control */ |
---|
377 | if (info->hwflow) { |
---|
378 | /* assert the RTS line */ |
---|
379 | MCF_UART_UOP1(minor) = 1; |
---|
380 | } |
---|
381 | |
---|
382 | return (0); |
---|
383 | } |
---|
384 | |
---|
385 | /*************************************************************************** |
---|
386 | Function : IntUartInterruptClose |
---|
387 | |
---|
388 | Description : This disables interrupts when the tty is closed. |
---|
389 | ***************************************************************************/ |
---|
390 | static int IntUartInterruptClose(int major, int minor, void *arg) |
---|
391 | { |
---|
392 | struct IntUartInfoStruct *info = &IntUartInfo[minor]; |
---|
393 | |
---|
394 | /* disable the interrupts and the uart */ |
---|
395 | MCF_UART_UIMR(minor) = 0; |
---|
396 | MCF_UART_UCR(minor) = (MCF_UART_UCR_TX_DISABLED | MCF_UART_UCR_RX_DISABLED); |
---|
397 | |
---|
398 | /* reset values */ |
---|
399 | info->ttyp = NULL; |
---|
400 | info->uimr = 0; |
---|
401 | info->rx_in = 0; |
---|
402 | info->rx_out = 0; |
---|
403 | |
---|
404 | return (0); |
---|
405 | } |
---|
406 | |
---|
407 | /*************************************************************************** |
---|
408 | Function : IntUartTaskRead |
---|
409 | |
---|
410 | Description : This reads all available characters from the internal uart |
---|
411 | and places them into the termios buffer. The rx interrupts will be |
---|
412 | re-enabled after all data has been read. |
---|
413 | ***************************************************************************/ |
---|
414 | static int IntUartTaskRead(int minor) |
---|
415 | { |
---|
416 | char buffer[RX_BUFFER_SIZE]; |
---|
417 | int count; |
---|
418 | int rx_in; |
---|
419 | int index = 0; |
---|
420 | struct IntUartInfoStruct *info = &IntUartInfo[minor]; |
---|
421 | |
---|
422 | /* determine number of values to copy out */ |
---|
423 | rx_in = info->rx_in; |
---|
424 | if (info->rx_out <= rx_in) { |
---|
425 | count = rx_in - info->rx_out; |
---|
426 | } else { |
---|
427 | count = (RX_BUFFER_SIZE - info->rx_out) + rx_in; |
---|
428 | } |
---|
429 | |
---|
430 | /* copy data into local buffer from rx buffer */ |
---|
431 | while ((index < count) && (index < RX_BUFFER_SIZE)) { |
---|
432 | /* copy data byte */ |
---|
433 | buffer[index] = info->rx_buffer[info->rx_out]; |
---|
434 | index++; |
---|
435 | |
---|
436 | /* increment rx buffer values */ |
---|
437 | info->rx_out++; |
---|
438 | if (info->rx_out >= RX_BUFFER_SIZE) { |
---|
439 | info->rx_out = 0; |
---|
440 | } |
---|
441 | } |
---|
442 | |
---|
443 | /* check to see if buffer is not empty */ |
---|
444 | if (count > 0) { |
---|
445 | /* set characters into termios buffer */ |
---|
446 | rtems_termios_enqueue_raw_characters(info->ttyp, buffer, count); |
---|
447 | } |
---|
448 | |
---|
449 | return (EOF); |
---|
450 | } |
---|
451 | |
---|
452 | /*************************************************************************** |
---|
453 | Function : IntUartPollRead |
---|
454 | |
---|
455 | Description : This reads a character from the internal uart. It returns |
---|
456 | to the caller without blocking if not character is waiting. |
---|
457 | ***************************************************************************/ |
---|
458 | static int IntUartPollRead(int minor) |
---|
459 | { |
---|
460 | if ((MCF_UART_USR(minor) & MCF_UART_USR_RXRDY) == 0) |
---|
461 | return (-1); |
---|
462 | |
---|
463 | return (MCF_UART_URB(minor)); |
---|
464 | } |
---|
465 | |
---|
466 | /*************************************************************************** |
---|
467 | Function : IntUartPollWrite |
---|
468 | |
---|
469 | Description : This writes out each character in the buffer to the |
---|
470 | appropriate internal uart channel waiting till each one is sucessfully |
---|
471 | transmitted. |
---|
472 | ***************************************************************************/ |
---|
473 | static ssize_t IntUartPollWrite(int minor, const char *buf, size_t len) |
---|
474 | { |
---|
475 | size_t retval = len; |
---|
476 | /* loop over buffer */ |
---|
477 | while (len--) { |
---|
478 | /* block until we can transmit */ |
---|
479 | while ((MCF_UART_USR(minor) & MCF_UART_USR_TXRDY) == 0) |
---|
480 | continue; |
---|
481 | /* transmit data byte */ |
---|
482 | MCF_UART_UTB(minor) = *buf++; |
---|
483 | } |
---|
484 | return retval; |
---|
485 | } |
---|
486 | |
---|
487 | /*************************************************************************** |
---|
488 | Function : console_initialize |
---|
489 | |
---|
490 | Description : This initialises termios, both sets of uart hardware before |
---|
491 | registering /dev/tty devices for each channel and the system /dev/console. |
---|
492 | ***************************************************************************/ |
---|
493 | rtems_device_driver console_initialize(rtems_device_major_number major, |
---|
494 | rtems_device_minor_number minor, |
---|
495 | void *arg) |
---|
496 | { |
---|
497 | rtems_status_code status; |
---|
498 | |
---|
499 | /* Set up TERMIOS */ |
---|
500 | rtems_termios_initialize(); |
---|
501 | |
---|
502 | /* set io modes for the different channels and initialize device */ |
---|
503 | IntUartInfo[minor].iomode = TERMIOS_IRQ_DRIVEN; |
---|
504 | IntUartInitialize(); |
---|
505 | |
---|
506 | /* Register the console port */ |
---|
507 | status = rtems_io_register_name("/dev/console", major, CONSOLE_PORT); |
---|
508 | if (status != RTEMS_SUCCESSFUL) { |
---|
509 | rtems_fatal_error_occurred(status); |
---|
510 | } |
---|
511 | |
---|
512 | /* Register the other port */ |
---|
513 | if (CONSOLE_PORT != 0) { |
---|
514 | status = rtems_io_register_name("/dev/tty00", major, 0); |
---|
515 | if (status != RTEMS_SUCCESSFUL) { |
---|
516 | rtems_fatal_error_occurred(status); |
---|
517 | } |
---|
518 | } |
---|
519 | if (CONSOLE_PORT != 1) { |
---|
520 | status = rtems_io_register_name("/dev/tty01", major, 1); |
---|
521 | if (status != RTEMS_SUCCESSFUL) { |
---|
522 | rtems_fatal_error_occurred(status); |
---|
523 | } |
---|
524 | } |
---|
525 | |
---|
526 | return (RTEMS_SUCCESSFUL); |
---|
527 | } |
---|
528 | |
---|
529 | /*************************************************************************** |
---|
530 | Function : console_open |
---|
531 | |
---|
532 | Description : This actually opens the device depending on the minor |
---|
533 | number set during initialisation. The device specific access routines are |
---|
534 | passed to termios when the devices is opened depending on whether it is |
---|
535 | polled or not. |
---|
536 | ***************************************************************************/ |
---|
537 | rtems_device_driver console_open(rtems_device_major_number major, |
---|
538 | rtems_device_minor_number minor, void *arg) |
---|
539 | { |
---|
540 | rtems_status_code status = RTEMS_INVALID_NUMBER; |
---|
541 | rtems_libio_open_close_args_t *args = (rtems_libio_open_close_args_t *) arg; |
---|
542 | struct IntUartInfoStruct *info; |
---|
543 | |
---|
544 | static const rtems_termios_callbacks IntUartPollCallbacks = { |
---|
545 | NULL, /* firstOpen */ |
---|
546 | NULL, /* lastClose */ |
---|
547 | IntUartPollRead, /* pollRead */ |
---|
548 | IntUartPollWrite, /* write */ |
---|
549 | IntUartSetAttributes, /* setAttributes */ |
---|
550 | NULL, /* stopRemoteTx */ |
---|
551 | NULL, /* startRemoteTx */ |
---|
552 | TERMIOS_POLLED /* mode */ |
---|
553 | }; |
---|
554 | static const rtems_termios_callbacks IntUartIntrCallbacks = { |
---|
555 | IntUartInterruptOpen, /* firstOpen */ |
---|
556 | IntUartInterruptClose, /* lastClose */ |
---|
557 | NULL, /* pollRead */ |
---|
558 | IntUartInterruptWrite, /* write */ |
---|
559 | IntUartSetAttributes, /* setAttributes */ |
---|
560 | NULL, /* stopRemoteTx */ |
---|
561 | NULL, /* startRemoteTx */ |
---|
562 | TERMIOS_IRQ_DRIVEN /* mode */ |
---|
563 | }; |
---|
564 | |
---|
565 | static const rtems_termios_callbacks IntUartTaskCallbacks = { |
---|
566 | IntUartInterruptOpen, /* firstOpen */ |
---|
567 | IntUartInterruptClose, /* lastClose */ |
---|
568 | IntUartTaskRead, /* pollRead */ |
---|
569 | IntUartInterruptWrite, /* write */ |
---|
570 | IntUartSetAttributes, /* setAttributes */ |
---|
571 | NULL, /* stopRemoteTx */ |
---|
572 | NULL, /* startRemoteTx */ |
---|
573 | TERMIOS_TASK_DRIVEN /* mode */ |
---|
574 | }; |
---|
575 | |
---|
576 | /* open the port depending on the minor device number */ |
---|
577 | if ((minor >= 0) && (minor < MAX_UART_INFO)) { |
---|
578 | info = &IntUartInfo[minor]; |
---|
579 | switch (info->iomode) { |
---|
580 | case TERMIOS_POLLED: |
---|
581 | status = rtems_termios_open(major, minor, arg, &IntUartPollCallbacks); |
---|
582 | break; |
---|
583 | case TERMIOS_IRQ_DRIVEN: |
---|
584 | status = rtems_termios_open(major, minor, arg, &IntUartIntrCallbacks); |
---|
585 | info->ttyp = args->iop->data1; |
---|
586 | break; |
---|
587 | case TERMIOS_TASK_DRIVEN: |
---|
588 | status = rtems_termios_open(major, minor, arg, &IntUartTaskCallbacks); |
---|
589 | info->ttyp = args->iop->data1; |
---|
590 | break; |
---|
591 | } |
---|
592 | } |
---|
593 | |
---|
594 | if (status == RTEMS_SUCCESSFUL) { |
---|
595 | /* |
---|
596 | * Reset the default baudrate. |
---|
597 | */ |
---|
598 | struct termios term; |
---|
599 | |
---|
600 | if (tcgetattr(STDIN_FILENO, &term) >= 0) { |
---|
601 | term.c_cflag &= ~(CSIZE); |
---|
602 | term.c_cflag |= CS8; |
---|
603 | term.c_ispeed = B19200; |
---|
604 | term.c_ospeed = B19200; |
---|
605 | tcsetattr(STDIN_FILENO, TCSANOW, &term); |
---|
606 | } |
---|
607 | } |
---|
608 | |
---|
609 | return (status); |
---|
610 | } |
---|
611 | |
---|
612 | /*************************************************************************** |
---|
613 | Function : console_close |
---|
614 | |
---|
615 | Description : This closes the device via termios |
---|
616 | ***************************************************************************/ |
---|
617 | rtems_device_driver console_close(rtems_device_major_number major, |
---|
618 | rtems_device_minor_number minor, void *arg) |
---|
619 | { |
---|
620 | return (rtems_termios_close(arg)); |
---|
621 | } |
---|
622 | |
---|
623 | /****************** |
---|
624 | ********************************************************* |
---|
625 | Function : console_read |
---|
626 | |
---|
627 | Description : Read from the device via termios |
---|
628 | ***************************************************************************/ |
---|
629 | rtems_device_driver console_read(rtems_device_major_number major, |
---|
630 | rtems_device_minor_number minor, void *arg) |
---|
631 | { |
---|
632 | return (rtems_termios_read(arg)); |
---|
633 | } |
---|
634 | |
---|
635 | /*************************************************************************** |
---|
636 | Function : console_write |
---|
637 | |
---|
638 | Description : Write to the device via termios |
---|
639 | ***************************************************************************/ |
---|
640 | rtems_device_driver console_write(rtems_device_major_number major, |
---|
641 | rtems_device_minor_number minor, void *arg) |
---|
642 | { |
---|
643 | return (rtems_termios_write(arg)); |
---|
644 | } |
---|
645 | |
---|
646 | /*************************************************************************** |
---|
647 | Function : console_ioctl |
---|
648 | |
---|
649 | Description : Pass the IOCtl call to termios |
---|
650 | ***************************************************************************/ |
---|
651 | rtems_device_driver console_control(rtems_device_major_number major, |
---|
652 | rtems_device_minor_number minor, |
---|
653 | void *arg) |
---|
654 | { |
---|
655 | return (rtems_termios_ioctl(arg)); |
---|
656 | } |
---|