source: rtems/bsps/include/umon/cli.h @ 2afb22b

/**
 *  @file
 *
 *  @ingroup shared_cli
 *
 *  @brief Header file for Command Line Interface related stuff
 */

/*  Based upon code from MicroMonitor 1.17 from http://www.umonfw.com/
 *  which includes this notice:
 *
 **************************************************************************
 *  General notice:
 *  This code is part of a boot-monitor package developed as a generic base
 *  platform for embedded system designs.  As such, it is likely to be
 *  distributed to various projects beyond the control of the original
 *  author.  Please notify the author of any enhancements made or bugs found
 *  so that all may benefit from the changes.  In addition, notification back
 *  to the author will allow the new user to pick up changes that may have
 *  been made by other users after this version of the code was distributed.
 *
 *  Note1: the majority of this code was edited with 4-space tabs.
 *  Note2: as more and more contributions are accepted, the term "author"
 *         is becoming a mis-representation of credit.
 *
 *  Original author:    Ed Sutter
 *  Email:              esutter@alcatel-lucent.com
 *  Phone:              908-582-2351
 **************************************************************************
 *
 *  Ed Sutter has been informed that this code is being used in RTEMS.
 *
 *  This code was reformatted by Joel Sherrill from OAR Corporation and
 *  Fernando Nicodemos <fgnicodemos@terra.com.br> from NCB - Sistemas
 *  Embarcados Ltda. (Brazil) to be more compliant with RTEMS coding
 *  standards and to eliminate C++ style comments.
 */

#ifndef _cli_h
#define _cli_h

#ifdef __cplusplus
extern "C" {
#endif

/**
 *  @defgroup shared_cli Command table structure
 *
 *  @ingroup shared_umon
 *
 *  @brief Command table structure used by the monitor:
 */

struct  monCommand {
    char    *name;                                      /* Name of command seen by user. */
    int     (*func)(int,char **);       /* Called when command is invoked. */
    char    **helptxt;                          /* Help text (see notes below). */
        long    flags;                                  /* Single-bit flags for various uses */
                                                                        /* (see the CMDFLAG_XXX macros). */
};

#ifdef __cplusplus
}
#endif

/* Bits currently assigned to command flags used in the monCommand
 * structure...
 */
#define CMDFLAG_NOMONRC 1

/* Maximum size of a command line:
 */
#ifndef CMDLINESIZE
#define CMDLINESIZE     128
#endif

/* Maximum number of arguments in a command line:
 */
#define ARGCNT          24

/* Definitions for docommand() return values:
 *
 * Note that the CMD_SUCCESS, CMD_FAILURE and CMD_PARAM_ERROR are return
 * values used by the local command code also.  The remaining errors
 * (CMD_LINE_ERROR, CMD_ULVL_DENIED and CMD_NOT_FOUND) are used only by
 # the docommand() function.
 *
 *      CMD_SUCCESS:
 *              Everything worked ok.
 *      CMD_FAILURE:
 *              Command parameters were valid, but command itself failed for some other
 *              reason. The docommand() function does not print a message here, it
 *              is assumed that the error message was printed by the local function.
 *      CMD_PARAM_ERROR:
 *              Command line did not parse properly.  Control was passed to a
 *              local command function, but argument syntax caused it to choke.
 *              In this case docommand() will print out the generic CLI syntax error
 *              message.
 *      CMD_LINE_ERROR:
 *              Command line itself was invalid.  Too many args, invalid shell var
 *              syntax, etc.. Somekind of command line error prior to checking for
 *              the command name-to-function match.
 *      CMD_ULVL_DENIED:
 *              Command's user level is higher than current user level, so access
 *              is denied.
 *      CMD_NOT_FOUND:
 *              Since these same return values are used for each command function
 *              plus the docommand() function, this error indicates that docommand()
 *              could not even find the command in the command table.
 *      CMD_MONRC_DENIED:
 *              The command cannot execute because it is considered illegal
 *              when run from within the monrc file.
 */
#define CMD_SUCCESS                     0
#define CMD_FAILURE                     -1
#define CMD_PARAM_ERROR         -2
#define CMD_LINE_ERROR          -3
#define CMD_ULVL_DENIED         -4
#define CMD_NOT_FOUND           -5
#define CMD_MONRC_DENIED        -6

/* Notes on help text array:
 * The monitor's CLI processor assumes that every command's help text
 * array abides by a few basic rules...
 * First of all, it assumes that every array has AT LEAST two strings.
 * The first string in the array of strings is assumed to be a one-line
 * abstract describing the command.
 * The second string in the array of strings is assumed to be a usage
 * message that describes the syntax of the arguments needed by the command.
 * If this second string is an empty string (""), the docommand() prints out
 * a generic usage string indicating that there are no options or arguements
 * to apply to the command.
 * All remaining lines are formatted based on the needs of the individual
 * command and the final string is a null pointer to let the CLI processor
 * know where the end is.
 * Following is an example help text array...
 *
 *      char *HelpHelp[] = {
 *                      "Display command set",
 *                      "-[d] [commandname]",
 *                      "Options:",
 *                      " -d   list commands and descriptions",
 *                      0,
 *      };
 *
 */
#endif