source: rtems/bsps/arm/stm32f4/include/bsp/stm32f4xxxx_gpio.h @ 2afb22b

5
Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 805 bytes
Line 
1/**
2 * @file
3 * @ingroup stm32f4_gpio
4 * @brief STM32F4XXXX GPIO support.
5 */
6
7/*
8 * Copyright (c) 2012 Sebastian Huber.  All rights reserved.
9 *
10 *  embedded brains GmbH
11 *  Obere Lagerstr. 30
12 *  82178 Puchheim
13 *  Germany
14 *  <rtems@embedded-brains.de>
15 *
16 * The license and distribution terms for this file may be
17 * found in the file LICENSE in this distribution or at
18 * http://www.rtems.org/license/LICENSE.
19 */
20
21#ifndef LIBBSP_ARM_STM32F4_STM32F4XXXX_GPIO_H
22#define LIBBSP_ARM_STM32F4_STM32F4XXXX_GPIO_H
23
24#include <bsp/utility.h>
25
26typedef struct {
27        uint32_t moder;
28        uint32_t otyper;
29        uint32_t ospeedr;
30        uint32_t pupdr;
31        uint32_t idr;
32        uint32_t odr;
33        uint32_t bsrr;
34        uint32_t lckr;
35        uint32_t afr [2];
36        uint32_t reserved_28 [246];
37} stm32f4_gpio;
38
39#endif /* LIBBSP_ARM_STM32F4_STM32F4XXXX_GPIO_H */
Note: See TracBrowser for help on using the repository browser.