source: rtems/bsps/arm/stm32f4/include/bsp/stm32f10xxx_rcc.h @ 2afb22b

Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "" files.

Update #3254.

  • Property mode set to 100644
File size: 940 bytes
2 * @file
3 * @ingroup stm32f10xxx_rcc
4 * @brief STM32F10XXX RCC support.
5 */
8 * Copyright (c) 2013 Christian Mauderer.  All rights reserved.
9 *
10 *  embedded brains GmbH
11 *  Obere Lagerstr. 30
12 *  82178 Puchheim
13 *  Germany
14 *  <>
15 *
16 * The license and distribution terms for this file may be
17 * found in the file LICENSE in this distribution or at
18 *
19 */
24#include <bsp/utility.h>
27 * @defgroup stm32f10xxx_rcc STM32F10XXX RCC Support
28 * @ingroup stm32f4_rcc
29 * @brief STM32F10XXX RCC Support
30 * @{
31 */
33typedef struct {
34        uint32_t cr;
35        uint32_t cfgr;
36        uint32_t cir;
37        uint32_t apbrstr [2];
38        uint32_t ahbenr [1];
39        uint32_t apbenr [2];
40        uint32_t bdcr;
41        uint32_t csr;
42        uint32_t ahbstr;
43        uint32_t cfgr2;
44} stm32f4_rcc;
46/** @} */
48#endif /* LIBBSP_ARM_STM32F4_STM32F10XXX_RCC_H */
Note: See TracBrowser for help on using the repository browser.