source: rtems/bsps/arm/lpc32xx/include/tm27.h @ 7632906

5
Last change on this file since 7632906 was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.
  • Property mode set to 100644
File size: 1.4 KB
Line 
1/* @file
2 *
3 * @ingroup arm_lpc32xx
4 *
5 * @brief Implementations of interrupt mechanisms for Time Test 27
6 */
7
8/*
9 * Copyright (c) 2010 embedded brains GmbH.  All rights reserved.
10 *
11 *  embedded brains GmbH
12 *  Obere Lagerstr. 30
13 *  82178 Puchheim
14 *  Germany
15 *  <info@embedded-brains.de>
16 *
17 * The license and distribution terms for this file may be
18 * found in the file LICENSE in this distribution or at
19 * http://www.rtems.org/license/LICENSE.
20 */
21
22#ifndef _RTEMS_TMTEST27
23#error "This is an RTEMS internal file you must not include directly."
24#endif
25
26#ifndef __tm27_h
27#define __tm27_h
28
29#include <assert.h>
30
31#include <rtems.h>
32
33#include <bsp/lpc32xx.h>
34#include <bsp/irq.h>
35#include <bsp/irq-generic.h>
36
37#define MUST_WAIT_FOR_INTERRUPT 1
38
39static void Install_tm27_vector(void (*handler)(rtems_vector_number))
40{
41  rtems_status_code sc = RTEMS_SUCCESSFUL;
42
43  LPC32XX_SW_INT = 0;
44
45  sc = rtems_interrupt_handler_install(
46    LPC32XX_IRQ_SW,
47    "SW",
48    RTEMS_INTERRUPT_UNIQUE,
49    (rtems_interrupt_handler) handler,
50    NULL
51  );
52  assert(sc == RTEMS_SUCCESSFUL);
53}
54
55static void Cause_tm27_intr(void)
56{
57  LPC32XX_SW_INT = 0x1;
58}
59
60static void Clear_tm27_intr(void)
61{
62  LPC32XX_SW_INT = 0;
63  lpc32xx_irq_set_priority(LPC32XX_IRQ_SW, LPC32XX_IRQ_PRIORITY_LOWEST);
64}
65
66static void Lower_tm27_intr(void)
67{
68  bsp_interrupt_vector_enable(LPC32XX_IRQ_SW);
69  lpc32xx_irq_set_priority(LPC32XX_IRQ_SW, LPC32XX_IRQ_PRIORITY_HIGHEST);
70}
71
72#endif /* __tm27_h */
Note: See TracBrowser for help on using the repository browser.