source: rtems/bsps/arm/imx/include/arm/freescale/imx/imx_iomuxreg.h @ d7d66d7

5
Last change on this file since d7d66d7 was 2afb22b, checked in by Chris Johns <chrisj@…>, on Dec 23, 2017 at 7:18:56 AM

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 3.0 KB
Line 
1/*-
2 * Copyright (c) 2015 Oleksandr Tymoshenko <gonzo@freebsd.org>
3 * All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 *
26 * $FreeBSD: head/sys/arm/freescale/imx/imx_iomuxreg.h 322015 2017-08-03 14:43:41Z ian $
27 */
28
29#ifndef IMX_IOMUXREG_H
30#define IMX_IOMUXREG_H
31
32#define IMX_IOMUXREG_LOWEST_SET_BIT(__mask) ((((__mask) - 1) & (__mask)) ^ (__mask))
33#define IMX_IOMUXREG_SHIFTIN(__x, __mask) ((__x) * IMX_IOMUXREG_LOWEST_SET_BIT(__mask))
34
35#define IMX_IOMUXREG_BIT(n) (1 << (n))
36#define IMX_IOMUXREG_BITS(__m, __n)     \
37        ((IMX_IOMUXREG_BIT(MAX((__m), (__n)) + 1) - 1) ^ (IMX_IOMUXREG_BIT(MIN((__m), (__n))) - 1))
38
39#define IOMUXC_GPR0                     0x00
40#define IOMUXC_GPR1                     0x04
41#define IOMUXC_GPR2                     0x08
42#define IOMUXC_GPR3                     0x0C
43#define   IOMUXC_GPR3_HDMI_MASK           (3 << 2)
44#define   IOMUXC_GPR3_HDMI_IPU1_DI0       (0 << 2)
45#define   IOMUXC_GPR3_HDMI_IPU1_DI1       (1 << 2)
46#define   IOMUXC_GPR3_HDMI_IPU2_DI0       (2 << 2)
47#define   IOMUXC_GPR3_HDMI_IPU2_DI1       (3 << 2)
48
49#define IOMUX_GPR13                     0x34
50#define   IOMUX_GPR13_SATA_PHY_8(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(26, 24))
51#define   IOMUX_GPR13_SATA_PHY_7(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(23, 19))
52#define   IOMUX_GPR13_SATA_PHY_6(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(18, 16))
53#define   IOMUX_GPR13_SATA_SPEED(n)       IMX_IOMUXREG_SHIFTIN(n, (1 << 15))
54#define   IOMUX_GPR13_SATA_PHY_5(n)       IMX_IOMUXREG_SHIFTIN(n, (1 << 14))
55#define   IOMUX_GPR13_SATA_PHY_4(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(13, 11))
56#define   IOMUX_GPR13_SATA_PHY_3(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(10, 7))
57#define   IOMUX_GPR13_SATA_PHY_2(n)       IMX_IOMUXREG_SHIFTIN(n, IMX_IOMUXREG_BITS(6, 2))
58#define   IOMUX_GPR13_SATA_PHY_1(n)       IMX_IOMUXREG_SHIFTIN(n, (1 << 1))
59#define   IOMUX_GPR13_SATA_PHY_0(n)       IMX_IOMUXREG_SHIFTIN(n, (1 << 0))
60
61#endif
Note: See TracBrowser for help on using the repository browser.