Last change
on this file was
eb36d11,
checked in by Sebastian Huber <sebastian.huber@…>, on 04/25/18 at 13:06:08
|
bsps: Move documentation, etc. files to bsps
This patch is a part of the BSP source reorganization.
Update #3285.
|
-
Property mode set to
100644
|
File size:
796 bytes
|
Line | |
---|
1 | To build and run the tests for this BSP, use the RTEMS tester. |
---|
2 | The necessary software can be built with the RTEMS source builder. |
---|
3 | |
---|
4 | To build the BSP for testing: |
---|
5 | - set CONSOLE_POLLED=1 in the configure environment, some tests |
---|
6 | assume console i/o is polled |
---|
7 | - add --enable-tests to the configure line |
---|
8 | |
---|
9 | 1. Qemu |
---|
10 | |
---|
11 | Linaro Qemu can emulate the beagleboard xm and so run all regression |
---|
12 | tests in software. Build the bbxm.bset from the RTEMS source builder and |
---|
13 | you will get qemu linaro that can run them. There is a beagleboardxm_qemu |
---|
14 | bsp in the RTEMS tester to invoke it with every test. |
---|
15 | |
---|
16 | 2. bbxm hardware |
---|
17 | |
---|
18 | This requires JTAG, see README.JTAG. Use the beagleboardxm bsp in the |
---|
19 | RTEMS tester. It starts gdb to connect to openocd to reset the target |
---|
20 | and load the RTEMS executable for each test iteration. |
---|
Note: See
TracBrowser
for help on using the repository browser.