source: rtems/bsps/arm/atsam/include/libchip/include/uart_dma.h @ 71c5552f

5
Last change on this file since 71c5552f was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 5.2 KB
Line 
1/* ---------------------------------------------------------------------------- */
2/*                  Atmel Microcontroller Software Support                      */
3/*                       SAM Software Package License                           */
4/* ---------------------------------------------------------------------------- */
5/* Copyright (c) 2015, Atmel Corporation                                        */
6/*                                                                              */
7/* All rights reserved.                                                         */
8/*                                                                              */
9/* Redistribution and use in source and binary forms, with or without           */
10/* modification, are permitted provided that the following condition is met:    */
11/*                                                                              */
12/* - Redistributions of source code must retain the above copyright notice,     */
13/* this list of conditions and the disclaimer below.                            */
14/*                                                                              */
15/* Atmel's name may not be used to endorse or promote products derived from     */
16/* this software without specific prior written permission.                     */
17/*                                                                              */
18/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
19/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
20/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
21/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
22/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
23/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
24/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
25/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
26/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
27/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
28/* ---------------------------------------------------------------------------- */
29
30/**
31 * \file
32 *
33 * Implementation of UART driver, transfer data through DMA.
34 *
35 */
36
37#ifndef _UART_DMA_
38#define _UART_DMA_
39
40/*----------------------------------------------------------------------------
41 *        Headers
42 *----------------------------------------------------------------------------*/
43
44#include "chip.h"
45
46/*----------------------------------------------------------------------------
47 *        Definitions
48 *----------------------------------------------------------------------------*/
49
50/** An unspecified error has occurred.*/
51#define UARTD_ERROR          1
52
53/** UART driver is currently in use.*/
54#define UARTD_ERROR_LOCK     2
55
56
57#ifdef __cplusplus
58extern "C" {
59#endif
60
61/*----------------------------------------------------------------------------
62 *        Types
63 *----------------------------------------------------------------------------*/
64
65/** UART transfer complete callback. */
66typedef void (*UartdCallback)(uint8_t, void *);
67
68/** \brief usart Transfer Request prepared by the application upper layer.
69 *
70 * This structure is sent to the UART_Send or UART_Rcv to start the transfer.
71 * At the end of the transfer, the callback is invoked by the interrupt handler.
72 */
73typedef struct {
74        /** Pointer to the Buffer. */
75        uint8_t *pBuff;
76        /** Buff size in bytes. */
77        uint32_t BuffSize;
78        /** Dma channel num. */
79        uint32_t ChNum;
80        /** Callback function invoked at the end of transfer. */
81        UartdCallback callback;
82        /** Callback arguments. */
83        void *pArgument;
84        /** flag to indicate the current transfer. */
85        volatile uint8_t sempaphore;
86        /* DMA LLI structure */
87        LinkedListDescriporView1    *pLLIview;
88        /* DMA transfer type */
89        eXdmadProgState dmaProgrammingMode;
90        /* DMA LLI size */
91        uint16_t dmaBlockSize;
92        /* Flag using ring buffer or FiFo*/
93        uint8_t dmaRingBuffer;
94} UartChannel;
95
96/** Constant structure associated with UART port. This structure prevents
97    client applications to have access in the same time. */
98typedef struct {
99        /** USART Id as defined in the product datasheet */
100        uint8_t uartId;
101        /** Pointer to DMA driver */
102        sXdmad *pXdmad;
103        /** Pointer to UART Hardware registers */
104        Uart *pUartHw;
105        /** Current Uart Rx channel */
106        UartChannel *pRxChannel;
107        /** Current Uart Tx channel */
108        UartChannel *pTxChannel;
109} UartDma;
110
111/*----------------------------------------------------------------------------
112 *        Exported functions
113 *----------------------------------------------------------------------------*/
114
115uint32_t UARTD_Configure(UartDma *pUartd ,
116                                                  uint8_t uartId,
117                                                  uint32_t uartMode,
118                                                  uint32_t baud,
119                                                  uint32_t clk);
120
121uint32_t UARTD_EnableTxChannels(UartDma *pUartd, UartChannel *pTxCh);
122
123uint32_t UARTD_EnableRxChannels(UartDma *pUartd, UartChannel *pRxCh);
124
125uint32_t UARTD_DisableTxChannels(UartDma *pUartd, UartChannel *pTxCh);
126
127uint32_t UARTD_DisableRxChannels(UartDma *pUartd, UartChannel *pRxCh);
128
129uint32_t UARTD_SendData(UartDma *pUartd);
130
131uint32_t UARTD_RcvData(UartDma *pUartd);
132
133#ifdef __cplusplus
134}
135#endif
136
137#endif /* #ifndef _UART_DMA_ */
Note: See TracBrowser for help on using the repository browser.