source: rtems/bsps/arm/atsam/include/libchip/include/same70/component/component_rtt.h @ 2afb22b

5
Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 4.6 KB
Line 
1/* ---------------------------------------------------------------------------- */
2/*                  Atmel Microcontroller Software Support                      */
3/*                       SAM Software Package License                           */
4/* ---------------------------------------------------------------------------- */
5/* Copyright (c) 2015, Atmel Corporation                                        */
6/*                                                                              */
7/* All rights reserved.                                                         */
8/*                                                                              */
9/* Redistribution and use in source and binary forms, with or without           */
10/* modification, are permitted provided that the following condition is met:    */
11/*                                                                              */
12/* - Redistributions of source code must retain the above copyright notice,     */
13/* this list of conditions and the disclaimer below.                            */
14/*                                                                              */
15/* Atmel's name may not be used to endorse or promote products derived from     */
16/* this software without specific prior written permission.                     */
17/*                                                                              */
18/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
19/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
20/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
21/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
22/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
23/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
24/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
25/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
26/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
27/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
28/* ---------------------------------------------------------------------------- */
29
30#ifndef _SAME70_RTT_COMPONENT_
31#define _SAME70_RTT_COMPONENT_
32
33/* ============================================================================= */
34/**  SOFTWARE API DEFINITION FOR Real-time Timer */
35/* ============================================================================= */
36/** \addtogroup SAME70_RTT Real-time Timer */
37/*@{*/
38
39#if !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__))
40/** \brief Rtt hardware registers */
41typedef struct {
42  __IO uint32_t RTT_MR; /**< \brief (Rtt Offset: 0x00) Mode Register */
43  __IO uint32_t RTT_AR; /**< \brief (Rtt Offset: 0x04) Alarm Register */
44  __I  uint32_t RTT_VR; /**< \brief (Rtt Offset: 0x08) Value Register */
45  __I  uint32_t RTT_SR; /**< \brief (Rtt Offset: 0x0C) Status Register */
46} Rtt;
47#endif /* !(defined(__ASSEMBLY__) || defined(__IAR_SYSTEMS_ASM__)) */
48/* -------- RTT_MR : (RTT Offset: 0x00) Mode Register -------- */
49#define RTT_MR_RTPRES_Pos 0
50#define RTT_MR_RTPRES_Msk (0xffffu << RTT_MR_RTPRES_Pos) /**< \brief (RTT_MR) Real-time Timer Prescaler Value */
51#define RTT_MR_RTPRES(value) ((RTT_MR_RTPRES_Msk & ((value) << RTT_MR_RTPRES_Pos)))
52#define RTT_MR_ALMIEN (0x1u << 16) /**< \brief (RTT_MR) Alarm Interrupt Enable */
53#define RTT_MR_RTTINCIEN (0x1u << 17) /**< \brief (RTT_MR) Real-time Timer Increment Interrupt Enable */
54#define RTT_MR_RTTRST (0x1u << 18) /**< \brief (RTT_MR) Real-time Timer Restart */
55#define RTT_MR_RTTDIS (0x1u << 20) /**< \brief (RTT_MR) Real-time Timer Disable */
56#define RTT_MR_RTC1HZ (0x1u << 24) /**< \brief (RTT_MR) Real-Time Clock 1Hz Clock Selection */
57/* -------- RTT_AR : (RTT Offset: 0x04) Alarm Register -------- */
58#define RTT_AR_ALMV_Pos 0
59#define RTT_AR_ALMV_Msk (0xffffffffu << RTT_AR_ALMV_Pos) /**< \brief (RTT_AR) Alarm Value */
60#define RTT_AR_ALMV(value) ((RTT_AR_ALMV_Msk & ((value) << RTT_AR_ALMV_Pos)))
61/* -------- RTT_VR : (RTT Offset: 0x08) Value Register -------- */
62#define RTT_VR_CRTV_Pos 0
63#define RTT_VR_CRTV_Msk (0xffffffffu << RTT_VR_CRTV_Pos) /**< \brief (RTT_VR) Current Real-time Value */
64/* -------- RTT_SR : (RTT Offset: 0x0C) Status Register -------- */
65#define RTT_SR_ALMS (0x1u << 0) /**< \brief (RTT_SR) Real-time Alarm Status (cleared on read) */
66#define RTT_SR_RTTINC (0x1u << 1) /**< \brief (RTT_SR) Prescaler Roll-over Status (cleared on read) */
67
68/*@}*/
69
70
71#endif /* _SAME70_RTT_COMPONENT_ */
Note: See TracBrowser for help on using the repository browser.