/* ---------------------------------------------------------------------------- */
/*                  Atmel Microcontroller Software Support                      */
/*                       SAM Software Package License                           */
/* ---------------------------------------------------------------------------- */
/* Copyright (c) 2015, Atmel Corporation                                        */
/*                                                                              */
/* All rights reserved.                                                         */
/*                                                                              */
/* Redistribution and use in source and binary forms, with or without           */
/* modification, are permitted provided that the following condition is met:    */
/*                                                                              */
/* - Redistributions of source code must retain the above copyright notice,     */
/* this list of conditions and the disclaimer below.                            */
/*                                                                              */
/* Atmel's name may not be used to endorse or promote products derived from     */
/* this software without specific prior written permission.                     */
/*                                                                              */
/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
/* ---------------------------------------------------------------------------- */

/**
 *  \file
 *
 *  \section Purpose
 *
 *  Interface for configuration the Analog-to-Digital Converter (ADC) peripheral.
 *
 *  \section Usage
 *
 *  -# Configurate the pins for ADC.
 *  -# Initialize the ADC with ADC_Initialize().
 *  -# Set ADC clock and timing with ADC_SetClock() and ADC_SetTiming().
 *  -# Select the active channel using ADC_EnableChannel().
 *  -# Start the conversion with ADC_StartConversion().
 *  -# Wait the end of the conversion by polling status with ADC_GetStatus().
 *  -# Finally, get the converted data using ADC_GetConvertedData() or
 * ADC_GetLastConvertedData().
 *
*/
#ifndef _ADC_
#define _ADC_

/*----------------------------------------------------------------------------
 *        Headers
 *----------------------------------------------------------------------------*/
#include <assert.h>
#include <stdint.h>

/*------------------------------------------------------------------------------
 *         Definitions
 *------------------------------------------------------------------------------*/

/* Max. ADC Clock Frequency (Hz) */
#define ADC_CLOCK_MAX   20000000

/* Max. normal ADC startup time (us) */
#define ADC_STARTUP_NORMAL_MAX     40
/* Max. fast ADC startup time (us) */
#define ADC_STARTUP_FAST_MAX       12

/* Definitions for ADC channels */
#define ADC_CHANNEL_0  0
#define ADC_CHANNEL_1  1
#define ADC_CHANNEL_2  2
#define ADC_CHANNEL_3  3
#define ADC_CHANNEL_4  4
#define ADC_CHANNEL_5  5
#define ADC_CHANNEL_6  6
#define ADC_CHANNEL_7  7
#define ADC_CHANNEL_8  8
#define ADC_CHANNEL_9  9
#define ADC_CHANNEL_10 10
#define ADC_CHANNEL_11 11
#define ADC_CHANNEL_12 12
#define ADC_CHANNEL_13 13
#define ADC_CHANNEL_14 14
#define ADC_CHANNEL_15 15

#ifdef __cplusplus
extern "C" {
#endif

/*------------------------------------------------------------------------------
 *         Macros function of register access
 *------------------------------------------------------------------------------*/

#define ADC_GetModeReg(pAdc)                ((pAdc)->ADC_MR)

#define ADC_StartConversion(pAdc)           ((pAdc)->ADC_CR = ADC_CR_START)

#define ADC_SetCalibMode(pAdc)                ((pAdc)->ADC_CR |= ADC_CR_AUTOCAL)

#define ADC_EnableChannel(pAdc, dwChannel)    {\
		(pAdc)->ADC_CHER = (1 << (dwChannel));\
	}

#define ADC_DisableChannel(pAdc, dwChannel)  {\
		(pAdc)->ADC_CHDR = (1 << (dwChannel));\
	}

#define ADC_EnableIt(pAdc, dwMode)            {\
		(pAdc)->ADC_IER = (dwMode);\
	}

#define ADC_DisableIt(pAdc, dwMode)           {\
		(pAdc)->ADC_IDR = (dwMode);\
	}

#define ADC_SetChannelGain(pAdc,dwMode)       {\
		(pAdc)->ADC_CGR = dwMode;\
	}

#define ADC_SetChannelOffset(pAdc,dwMode)     {\
		(pAdc)->ADC_COR = dwMode;\
	}

#define ADC_EnableDataReadyIt(pAdc)         ((pAdc)->ADC_IER = ADC_IER_DRDY)

#define ADC_GetStatus(pAdc)                 ((pAdc)->ADC_ISR)

#define ADC_GetCompareMode(pAdc)            (((pAdc)->ADC_EMR)& (ADC_EMR_CMPMODE_Msk))

#define ADC_GetChannelStatus(pAdc)          ((pAdc)->ADC_CHSR)

#define ADC_GetInterruptMaskStatus(pAdc)    ((pAdc)->ADC_IMR)

#define ADC_GetLastConvertedData(pAdc)      ((pAdc)->ADC_LCDR)

/*------------------------------------------------------------------------------
 *         Exported functions
 *------------------------------------------------------------------------------*/
extern void ADC_Initialize(Adc *pAdc, uint32_t dwId);
extern uint32_t ADC_SetClock(Adc *pAdc, uint32_t dwPres, uint32_t dwMck);
extern void ADC_SetTiming(Adc *pAdc, uint32_t dwStartup, uint32_t dwTracking,
						   uint32_t dwSettling);
extern void ADC_SetTrigger(Adc *pAdc, uint32_t dwTrgSel);
extern void ADC_SetTriggerMode(Adc *pAdc, uint32_t dwMode);
extern void ADC_SetLowResolution(Adc *pAdc, uint32_t bEnDis);
extern void ADC_SetSleepMode(Adc *pAdc, uint8_t bEnDis);
extern void ADC_SetFastWakeup(Adc *pAdc, uint8_t bEnDis);
extern void ADC_SetSequenceMode(Adc *pAdc, uint8_t bEnDis);
extern void ADC_SetSequence(Adc *pAdc, uint32_t dwSEQ1, uint32_t dwSEQ2);
extern void ADC_SetSequenceByList(Adc *pAdc, uint8_t ucChList[],
								   uint8_t ucNumCh);
extern void ADC_SetAnalogChange(Adc *pAdc, uint8_t bEnDis);
extern void ADC_SetTagEnable(Adc *pAdc, uint8_t bEnDis);
extern void ADC_SetCompareChannel(Adc *pAdc, uint32_t dwChannel);
extern void ADC_SetCompareMode(Adc *pAdc, uint32_t dwMode);
extern void ADC_SetComparisonWindow(Adc *pAdc, uint32_t dwHi_Lo);
extern uint8_t ADC_CheckConfiguration(Adc *pAdc, uint32_t dwMcK);
extern uint32_t ADC_GetConvertedData(Adc *pAdc, uint32_t dwChannel);
extern void ADC_SetTsAverage(Adc *pADC, uint32_t dwAvg2Conv);
extern uint32_t ADC_GetTsXPosition(Adc *pADC);
extern uint32_t ADC_GetTsYPosition(Adc *pADC);
extern uint32_t ADC_GetTsPressure(Adc *pADC);
extern void ADC_SetTsDebounce(Adc *pADC, uint32_t dwTime);
extern void ADC_SetTsPenDetect(Adc *pADC, uint8_t bEnDis);
extern void ADC_SetStartupTime(Adc *pAdc, uint32_t dwUs);
extern void ADC_SetTrackingTime(Adc *pAdc, uint32_t dwNs);
extern void ADC_SetTriggerPeriod(Adc *pAdc, uint32_t dwPeriod);
extern void ADC_SetTsMode(Adc *pADC, uint32_t dwMode);
extern void ADC_TsCalibration(Adc *pAdc);


#ifdef __cplusplus
}
#endif

#endif /* #ifndef _ADC_ */