source: rtems/bsps/arm/atsam/include/libchip/include/acc.h @ 71c5552f

5
Last change on this file since 71c5552f was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

  • Property mode set to 100644
File size: 5.9 KB
Line 
1/* ---------------------------------------------------------------------------- */
2/*                  Atmel Microcontroller Software Support                      */
3/*                       SAM Software Package License                           */
4/* ---------------------------------------------------------------------------- */
5/* Copyright (c) 2015, Atmel Corporation                                        */
6/*                                                                              */
7/* All rights reserved.                                                         */
8/*                                                                              */
9/* Redistribution and use in source and binary forms, with or without           */
10/* modification, are permitted provided that the following condition is met:    */
11/*                                                                              */
12/* - Redistributions of source code must retain the above copyright notice,     */
13/* this list of conditions and the disclaimer below.                            */
14/*                                                                              */
15/* Atmel's name may not be used to endorse or promote products derived from     */
16/* this software without specific prior written permission.                     */
17/*                                                                              */
18/* DISCLAIMER:  THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR   */
19/* IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF */
20/* MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE   */
21/* DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,      */
22/* INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT */
23/* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,  */
24/* OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF    */
25/* LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING         */
26/* NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, */
27/* EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.                           */
28/* ---------------------------------------------------------------------------- */
29
30/**
31 *  \file
32 *
33 *  \section Purpose
34 *
35 *  Interface for configuration the Analog-to-Digital Converter (ACC) peripheral.
36 *
37 *  \section Usage
38 *
39 *  -# Configurate the pins for ACC
40 *  -# Initialize the ACC with ACC_Initialize().
41 *  -# Select the active channel using ACC_EnableChannel()
42 *  -# Start the conversion with ACC_StartConversion()
43 *  -# Wait the end of the conversion by polling status with ACC_GetStatus()
44 *  -# Finally, get the converted data using ACC_GetConvertedData()
45 *
46 */
47#ifndef _ACC_
48#define _ACC_
49
50/*----------------------------------------------------------------------------
51 *        Headers
52 *----------------------------------------------------------------------------*/
53#include "chip.h"
54
55#include <stdint.h>
56#include <assert.h>
57
58/*------------------------------------------------------------------------------
59 *         Definitions
60 *------------------------------------------------------------------------------*/
61#define ACC_SELPLUS_AD12B0 0
62#define ACC_SELPLUS_AD12B1 1
63#define ACC_SELPLUS_AD12B2 2
64#define ACC_SELPLUS_AD12B3 3
65#define ACC_SELPLUS_AD12B4 4
66#define ACC_SELPLUS_AD12B5 5
67#define ACC_SELPLUS_AD12B6 6
68#define ACC_SELPLUS_AD12B7 7
69#define ACC_SELMINUS_TS 0
70#define ACC_SELMINUS_ADVREF 1
71#define ACC_SELMINUS_DAC0   2
72#define ACC_SELMINUS_DAC1   3
73#define ACC_SELMINUS_AD12B0 4
74#define ACC_SELMINUS_AD12B1 5
75#define ACC_SELMINUS_AD12B2 6
76#define ACC_SELMINUS_AD12B3 7
77
78#ifdef __cplusplus
79extern "C" {
80#endif
81
82/*------------------------------------------------------------------------------
83 *         Macros function of register access
84 *------------------------------------------------------------------------------*/
85#define ACC_CfgModeReg(pAcc, mode)  { \
86                (pAcc)->ACC_MR = (mode);\
87        }
88
89#define ACC_GetModeReg(pAcc)                ((pAcc)->ACC_MR)
90
91#define ACC_StartConversion(pAcc)           ((pAcc)->ACC_CR = ACC_CR_START)
92
93#define ACC_SoftReset(pAcc)                 ((pAcc)->ACC_CR = ACC_CR_SWRST)
94
95#define ACC_EnableChannel(pAcc, dwChannel)    {\
96                assert(dwChannel < 16);\
97                (pAcc)->ACC_CHER = (1 << (dwChannel));\
98        }
99
100#define ACC_DisableChannel(pAcc, dwChannel)  {\
101                assert(dwChannel < 16);\
102                (pAcc)->ACC_CHDR = (1 << (dwChannel));\
103        }
104
105#define ACC_EnableIt(pAcc, dwMode)            {\
106                assert(((dwMode)&0xFFF00000)== 0);\
107                (pAcc)->ACC_IER = (dwMode);\
108        }
109
110#define ACC_DisableIt(pAcc, dwMode)           {\
111                assert(((dwMode)&0xFFF00000)== 0);\
112                (pAcc)->ACC_IDR = (dwMode);\
113        }
114
115#define ACC_EnableDataReadyIt(pAcc)         ((pAcc)->ACC_IER = AT91C_ACC_DRDY)
116
117#define ACC_GetStatus(pAcc)                 ((pAcc)->ACC_ISR)
118
119#define ACC_GetChannelStatus(pAcc)          ((pAcc)->ACC_CHSR)
120
121#define ACC_GetInterruptMaskStatus(pAcc)    ((pAcc)->ACC_IMR)
122
123#define ACC_GetLastConvertedData(pAcc)      ((pAcc)->ACC_LCDR)
124
125#define ACC_CfgAnalogCtrlReg(pAcc, dwMode)     {\
126                assert(((dwMode) & 0xFFFCFF3C) == 0);\
127                (pAcc)->ACC_ACR = (dwMode);\
128        }
129
130#define ACC_CfgExtModeReg(pAcc, extmode)    {\
131                assert(((extmode) & 0xFF00FFFE) == 0);\
132                (pAcc)->ACC_EMR = (extmode);\
133        }
134
135#define ACC_GetAnalogCtrlReg(pAcc)          ((pAcc)->ACC_ACR)
136
137/*------------------------------------------------------------------------------
138 *         Exported functions
139 *------------------------------------------------------------------------------*/
140extern void ACC_Configure(Acc *pAcc, uint8_t idAcc, uint8_t ucSelplus,
141                                                   uint8_t ucSelminus, uint16_t wAc_en, uint16_t wEdge, uint16_t wInvert);
142
143extern void ACC_SetComparisonPair(Acc *pAcc, uint8_t ucSelplus,
144                                                                   uint8_t ucSelminus);
145
146extern uint32_t ACC_GetComparisonResult(Acc *pAcc, uint32_t dwStatus);
147
148#ifdef __cplusplus
149}
150#endif
151
152#endif /* #ifndef _ACC_ */
Note: See TracBrowser for help on using the repository browser.