source: rtems/bsps/arm/altera-cyclone-v/include/bsp/i2cdrv.h @ 2afb22b

5
Last change on this file since 2afb22b was 2afb22b, checked in by Chris Johns <chrisj@…>, on 12/23/17 at 07:18:56

Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step. It
copied header files from arbitrary locations into the build tree. The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

  • The make preinstall step itself needs time and disk space.
  • Errors in header files show up in the build tree copy. This makes it hard for editors to open the right file to fix the error.
  • There is no clear relationship between source and build tree header files. This makes an audit of the build process difficult.
  • The visibility of all header files in the build tree makes it difficult to enforce API barriers. For example it is discouraged to use BSP-specifics in the cpukit.
  • An introduction of a new build system is difficult.
  • Include paths specified by the -B option are system headers. This may suppress warnings.
  • The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step. All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc. Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

  • cpukit/include
  • cpukit/score/cpu/@RTEMS_CPU@/include
  • cpukit/libnetworking

The new BSP include directories are:

  • bsps/include
  • bsps/@RTEMS_CPU@/include
  • bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed. The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.
  • Property mode set to 100644
File size: 1.4 KB
Line 
1/*
2 * Copyright (c) 2014 embedded brains GmbH.  All rights reserved.
3 *
4 *  embedded brains GmbH
5 *  Dornierstr. 4
6 *  82178 Puchheim
7 *  Germany
8 *  <info@embedded-brains.de>
9 *
10 * The license and distribution terms for this file may be
11 * found in the file LICENSE in this distribution or at
12 * http://www.rtems.org/license/LICENSE.
13 */
14
15#ifndef I2CDRV_H
16#define I2CDRV_H
17
18#include <rtems.h>
19
20#ifdef __cplusplus
21extern "C" {
22#endif /* __cplusplus */
23
24rtems_device_driver i2cdrv_initialize(
25  rtems_device_major_number major,
26  rtems_device_minor_number minor,
27  void *arg
28);
29
30rtems_device_driver i2cdrv_open(
31  rtems_device_major_number major,
32  rtems_device_minor_number minor,
33  void *arg
34);
35
36rtems_device_driver i2cdrv_close(
37  rtems_device_major_number major,
38  rtems_device_minor_number minor,
39  void *arg
40);
41
42rtems_device_driver i2cdrv_read(
43  rtems_device_major_number major,
44  rtems_device_minor_number minor,
45  void *arg
46);
47
48rtems_device_driver i2cdrv_write(
49  rtems_device_major_number major,
50  rtems_device_minor_number minor,
51  void *arg
52);
53
54rtems_device_driver i2cdrv_ioctl(
55  rtems_device_major_number major,
56  rtems_device_minor_number minor,
57  void *arg
58);
59
60#define I2C_DRIVER_TABLE_ENTRY \
61  { \
62    i2cdrv_initialize, \
63    i2cdrv_open, \
64    i2cdrv_close, \
65    i2cdrv_read, \
66    i2cdrv_write, \
67    i2cdrv_ioctl \
68  }
69
70#define I2C_IOC_SET_SLAVE_ADDRESS 1
71
72#ifdef __cplusplus
73}
74#endif /* __cplusplus */
75
76#endif /* I2CDRV_H */
Note: See TracBrowser for help on using the repository browser.