source: rtems/automake/compile.am @ 88c3c5e

4.104.114.84.95
Last change on this file since 88c3c5e was 88c3c5e, checked in by Ralf Corsepius <ralf.corsepius@…>, on 12/11/03 at 16:32:00

2003-12-11 Ralf Corsepius <corsepiu@…>

  • configure.ac: Remove make/custom/Makefile.
  • Makefile.am: Cosmetics.
  • automake/compile.am: Remove compilation rules. Remove $(ARCH) directory generation.
  • Property mode set to 100644
File size: 5.6 KB
Line 
1##
2## $Id$
3##
4
5## -------------------------------------------------------------------------
6## NOTE: This file is rather immature and has to be considered to be
7## almost experimental.
8##
9## Expect frequent changes -- It deserves to be cleaned up :(
10## -------------------------------------------------------------------------
11
12## The section below is based on make/compilers/gcc-target-default.cfg
13## used in former versions of RTEMS.
14
15##
16## Set up the flags for the toolchains:
17##
18## We are considering 3 different building schemes here:
19## * Using gcc's being able to accept -specs (aka gcc-2.8 building scheme)
20## * Using gcc's not being able to accept -specs (aka gcc-2.7.2 building
21##   scheme)
22## * Using third party toolchains (aka non-gcc building scheme)
23##
24## Automake conditionals in use:
25## RTEMS_USE_GCC     .. if we are using GCC
26
27## NOTES:
28## * The gcc-2.8 building scheme is the nominal building scheme and
29##   is actively supported.
30## * The non-gcc building scheme requires manually setting up environment
31##   variables and is hardly tested at all
32
33## CFLAGS_OPTIMIZE_V, CFLAGS_DEBUG_V are the values we
34## would want the corresponding macros to be set to.
35##
36## CFLAGS_OPTIMIZE, CFLAGS_DEBUG are set by the
37## 'VARIANT=<OPTIMIZE|DEBUG>' targets to their _V values.
38
39## XCPPFLAGS, XCFLAGS, XCXXFLAGS, XASFLAGS
40## are used to add flags from the shell
41## cf. make.info ("Implicit rules/variables" for details)
42
43if RTEMS_USE_GCC
44## All the stuff below is specific to gcc
45
46## gcc >= 2.8.x
47GCCSPECS = $(GCC_SPECS) $(RTEMS_BSP_SPECS)
48else
49## fall back to the old style compilers/*.cfg
50## CONFIG.CC is supposed to be provided by <BSP>.cfg
51include $(CONFIG.CC)
52endif # RTEMS_USE_GCC
53
54DEFS = @DEFS@
55
56CPPFLAGS = @CPPFLAGS@ $(CPU_DEFINES) $(DEFINES) $(XCPPFLAGS)
57CFLAGS   = @RTEMS_CFLAGS@ $(XCFLAGS)
58## FIXME: This should be correct, but is not supported, yet
59# CXXFLAGS = @RTEMS_CXXFLAGS@ $(XCXXFLAGS)
60## Fall back to using RTEMS_CFLAGS for C++
61CXXFLAGS = @RTEMS_CFLAGS@ $(XCXXFLAGS)
62ASFLAGS  = $(CPU_ASFLAGS) $(CPU_CFLAGS) $(XASFLAGS)
63
64LINK_LIBS = $(LD_LIBS)
65
66#
67# Client compiler and support tools
68#
69
70#
71# How to compile stuff into ${ARCH} subdirectory
72#
73
74COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
75        $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
76CCLD = $(CC)
77LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) \
78        $(AM_LDFLAGS) $(LDFLAGS) -o $@
79
80CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
81        $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
82CXXLD = $(CXX)
83CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) \
84        $(AM_LDFLAGS) $(LDFLAGS) -o $@
85
86CCAS = $(CC)
87CCASCOMPILE = $(CCAS) $(AM_CCASFLAGS) $(CCASFLAGS)
88
89# OBSOLETE: Don't use
90AS = $(CC)
91ASCOMPILE = $(AS) $(AM_ASFLAGS) $(ASFLAGS)
92
93# Dependency files for use by gmake
94# NOTE: we don't put them into $(ARCH)
95#       so that 'make clean' doesn't blow it away
96
97DEPEND=Depends-${ARCH}
98
99# We deliberately don't have anything depend on the
100# $(DEPEND) file; otherwise it will get rebuilt even
101# on 'make clean'
102#
103
104if RTEMS_USE_GCC
105## HACK: Specific to gcc
106## FIXME: The approach below is known to be conceptionally broken.
107depend-gcc: $(C_FILES) $(CC_FILES) $(S_FILES)
108##       Use gcc -M to generate dependencies
109##       Replace foo.o with $(ARCH)/foo.o
110##       Replace $(ARCH) value with string $(ARCH)
111##           so that it will for debug cases
112        $(COMPILE) -M   $^    |  \
113        sed -e 's?^\(.*\)\.o[ ]*:?$$(ARCH)/\1.o:?' \
114            -e 's?$(ARCH)/?$$(ARCH)/?'   >$(DEPEND).tmp
115        mv $(DEPEND).tmp $(DEPEND)
116
117# pull in dependencies if they exist 
118ifeq (${DEPEND},$(wildcard ${DEPEND}))
119include ${DEPEND}
120@ENDIF@
121endif
122depend: depend-am
123
124# spell out all the LINK_FILE's, rather than using -lbsp, so
125#  that $(LINK_FILES) can be a dependency
126
127LINK_OBJS = \
128    $(OBJS) \
129    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
130
131LINK_FILES =\
132    $(START_FILE) \
133    $(OBJS) \
134    $(MANAGERS_NOT_WANTED:%=$(PROJECT_RELEASE)/lib/no-%$(LIB_VARIANT).rel)
135
136if RTEMS_USE_GCC
137## gcc >= 2.8
138define make-rel
139        $(LINK) -qnolinkcmds -nostdlib -Wl,-r $(XLDFLAGS) $^
140endef
141else
142## non-gcc
143define make-rel
144        $(LINK) $(XLDFLAGS) $^
145endef
146endif
147
148## -------------------------------------------------------------------------
149
150## translate VARIANT into VARIANT_V
151VARIANT = OPTIMIZE
152
153VARIANT_OPTIMIZE_V = OPTIMIZE
154VARIANT_DEBUG_V = DEBUG
155VARIANT_optimize_V = OPTIMIZE
156VARIANT_debug_V = DEBUG
157
158VARIANT_V = $(VARIANT_$(VARIANT)_V)
159
160## Setup the variant build subdirectory
161ARCH_OPTIMIZE_V = o-optimize
162ARCH_DEBUG_V = o-debug
163
164ARCH__V = $(ARCH_OPTIMIZE_V)
165ARCH = $(ARCH_$(VARIANT_V)_V)
166
167## Setup the library suffix
168LIBSUFFIX_OPTIMIZE_V =
169LIBSUFFIX_DEBUG_V = _g
170LIBSUFFIX__V = $(LIBSUFFIX_OPTIMIZE_V)
171
172LIB_VARIANT = $(LIBSUFFIX_$(VARIANT_V)_V)
173
174## These are supposed to be set in make/custom/<bsp>.cfg
175CPU_CFLAGS = @CPU_CFLAGS@
176CFLAGS_OPTIMIZE_V = @CFLAGS_OPTIMIZE_V@
177CFLAGS_DEBUG_V = @CFLAGS_DEBUG_V@
178CFLAGS__V = $(CFLAGS_OPTIMIZE_V)
179
180## ------------------------------------------------------------------------
181## Setup hard-coded flags
182if RTEMS_USE_GCC
183## gcc >= gcc-2.8
184RTEMS_CFLAGS_OPTIMIZE_V =
185RTEMS_CFLAGS_DEBUG_V = -qrtems_debug -Wno-unused
186
187## non-gcc
188## We can't guess what flags might be required here.
189## Pass the values from the environment if you want to apply them.
190endif
191RTEMS_CFLAGS__V = $(RTEMS_CFLAGS_OPTIMIZE_V)
192
193## -------------------------------------------------------------------------
194
195CC = @CC@ $(GCCSPECS)
196CXX = @CXX@ $(GCCSPECS)
197CPP = @CPP@ $(GCCSPECS)
198
199LD = @LD@
200OBJCOPY = @OBJCOPY@
201NM = @NM@
202SIZE = @SIZE@
203STRIP = @STRIP@
204
205##
206AM_CPPFLAGS = $(RTEMS_CPPFLAGS)
207AM_CFLAGS =
208AM_CXXFLAGS =
209AM_CCASFLAGS = $(CPU_CFLAGS) $(RTEMS_CPPFLAGS) $(RTEMS_CCASFLAGS)
210
211clean-local:
212        $(RM) -r o-optimize o-debug $(CLEANDIRS)
213        $(RM) Depends-o-optimize.tmp Depends-o-debug.tmp
Note: See TracBrowser for help on using the repository browser.