source: rtems/README @ 2f2a597
Last change on this file since 2f2a597 was ac7d5ef0, checked in by Joel Sherrill <joel.sherrill@…>, on 05/11/95 at 17:39:37

Initial revision

  • Property mode set to 100644
File size: 3.5 KB
2#  $Id$
5Directory Overview
8This is the top level of the RTEMS directory structure.  The following
9is a description of the files and directories in this directory:
12    Rudimentary installation instructions.  For more detailed
13    information please see the Release Notes.  The Postscript
14    version of this manual can be found in the file
15    c_or_ada/doc/relnotes.tgz.
18    Required legalese.
21    This file.
23  c
24    This directory contains the source code for the C
25    implementation of RTEMS as well as the test suites, sample
26    applications, Board Support Packages, Device Drivers, and
27    support libraries.
29  doc
30    This directory contains the PDL for the RTEMS executive.
32Ada versus C
35There are two implementations of RTEMS in this source tree --
36in Ada and in C.  These two implementations are functionally
37and structurally equivalent.  The C implementation follows
38the packaging conventions and hiearchical nature of the Ada
39implementation.  In addition, a style has been followed which
40allows one to easily find the corresponding Ada and C
43File names in C and code placement was carefully designed to insure
44a close mapping to the Ada implementation.  The following file name
45extensions are used:
47   .adb - Ada body
48   .ads - Ada specification
49   .adp - Ada body requiring preprocessing
50   .inc - include file for .adp files
52   .c   - C body (non-inlined routines)
53   .inl - C body (inlined routines)
54   .h   - C specification
56In the executive source, XYZ.c and XYZ.inl correspond directly to a
57single XYZ.adb or XYZ.adp file.  A .h file corresponds directly to
58the .ads file.  There are only a handful of .inc files in the
59Ada source and these are used to insure that the desired simple
60inline textual expansion is performed.  This avoids scoping and
61calling convention side-effects in carefully constructed tests
62which usually test context switch behavior.
64In addition, in Ada code and data name references are always fully
65qualified as PACKAGE.NAME.  In C, this convention is followed
66by having the package name as part of the name itself and using a
67capital letter to indicate the presence of a "." level.  So we have
68PACKAGE.NAME in Ada and _Package_Name in C.  The leading "_" in C
69is used to avoid naming conflicts between RTEMS and user variables.
70By using these conventions, one can easily compare the C and Ada
73The most noticeable difference between the C and Ada83 code is
74the inability to easily obtain a "typed pointer" in Ada83. 
75Using the "&" operator in C yields a pointer with a specific type.
76The 'Address attribute is the closest feature in Ada83.  This
77returns a System.Address and this must be coerced via Unchecked_Conversion
78into an access type of the desired type.  It is easy to view
79System.Address as similar to a "void *" in C, but this is not the case.
80A "void *" can be assigned to any other pointer type without an
81explicit conversion. 
83The solution adopted to this problem was to provide two routines for
84each access type in the Ada implementation -- one to convert from
85System.Address to the access type and another to go the opposite
86direction.  This results in code which accomplishes the same thing
87as the corresponding C but it is easier to get lost in the clutter
88of the apparent subprogram invocations than the "less bulky"
89C equivalent.
91A related difference is the types which are only in Ada which are used
92for pointers to arrays.  These types do not exist and are not needed
93in the C implementation.
Note: See TracBrowser for help on using the repository browser.