source: rtems-tools/tester/wscript @ e058db0

Last change on this file since e058db0 was e058db0, checked in by Chris Johns <chrisj@…>, on Nov 7, 2018 at 3:55:20 AM

python: Provide support to select a valid python version.

  • Update imports after wrapping the code.
  • Fix python3 issues.
  • Fix config path issues for in repo and install runs.

Closes #3537

  • Property mode set to 100644
File size: 3.8 KB
Line 
1#
2# RTEMS Tools Project (http://www.rtems.org/)
3# Copyright 2013-2016 Chris Johns (chrisj@rtems.org)
4# All rights reserved.
5#
6# This file is part of the RTEMS Tools package in 'rtems-tools'.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are met:
10#
11# 1. Redistributions of source code must retain the above copyright notice,
12# this list of conditions and the following disclaimer.
13#
14# 2. Redistributions in binary form must reproduce the above copyright notice,
15# this list of conditions and the following disclaimer in the documentation
16# and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31subdirs = ['covoar']
32
33def recurse(ctx):
34    for sd in subdirs:
35        ctx.recurse(sd)
36
37def init(ctx):
38    pass
39
40def options(opt):
41    recurse(opt)
42    opt.load('python')
43
44def configure(conf):
45    recurse(conf)
46
47def build(bld):
48    recurse(bld)
49
50    #
51    # Install the tester code.
52    #
53    bld(features = 'py',
54        source = ['rt/__init__.py',
55                  'rt/bsps.py',
56                  'rt/check.py',
57                  'rt/cmd-bsp-builder.py',
58                  'rt/cmd-run.py',
59                  'rt/cmd-test.py',
60                  'rt/config.py',
61                  'rt/console.py',
62                  'rt/coverage.py',
63                  'rt/gdb.py',
64                  'rt/options.py',
65                  'rt/report.py',
66                  'rt/run.py',
67                  'rt/stty.py',
68                  'rt/telnet.py',
69                  'rt/test.py',
70                  'rt/tftp.py'],
71        install_from = '.',
72        install_path = '${PREFIX}/share/rtems/tester')
73    bld(features = 'py',
74        source = ['rt/pygdb/__init__.py',
75                  'rt/pygdb/mi_parser.py',
76                  'rt/pygdb/spark.py'],
77        install_from = '.',
78        install_path = '${PREFIX}/share/rtems/tester')
79    bld(features = 'py',
80        source = ['rt/tftpy/__init__.py',
81                  'rt/tftpy/TftpClient.py',
82                  'rt/tftpy/TftpContexts.py',
83                  'rt/tftpy/TftpPacketFactory.py',
84                  'rt/tftpy/TftpPacketTypes.py',
85                  'rt/tftpy/TftpServer.py',
86                  'rt/tftpy/TftpShared.py',
87                  'rt/tftpy/TftpStates.py'],
88        install_from = '.',
89        install_path = '${PREFIX}/share/rtems/tester')
90    bld.install_files('${PREFIX}/bin',
91                      ['rtems-run',
92                       'rtems-test',
93                       'rtems-bsp-builder'],
94                      chmod = 0o755)
95
96    #
97    # Install the tester configuration files.
98    #
99    config = bld.path.find_dir('config')
100    bld.install_files('${PREFIX}/share/rtems/tester/config',
101                      config.ant_glob('**/*'), cwd = config,
102                      relative_trick = True)
103    rtems = bld.path.find_dir('rtems')
104    bld.install_files('${PREFIX}/share/rtems/tester/rtems',
105                      rtems.ant_glob('**/*'), cwd = rtems,
106                      relative_trick = True)
107
108def install(ctx):
109    recurse(ctx)
110
111def clean(ctx):
112    recurse(ctx)
Note: See TracBrowser for help on using the repository browser.