source: rtems-tools/tester/rtems/testing/coverage/symbol-sets.ini @ eecde47

Last change on this file since eecde47 was eecde47, checked in by Alex White <alex.white@…>, on Apr 8, 2021 at 5:13:54 PM

coverage/symbol-sets.ini : Add libuuid

  • Property mode set to 100644
File size: 4.2 KB
Line 
1#
2# RTEMS Tools Project (http://www.rtems.org/)
3# Copyright 2018 Chris Johns (chrisj@rtems.org)
4# All rights reserved.
5#
6# This file is part of the RTEMS Tools package in 'rtems-tools'.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are met:
10#
11# 1. Redistributions of source code must retain the above copyright notice,
12# this list of conditions and the following disclaimer.
13#
14# 2. Redistributions in binary form must reproduce the above copyright notice,
15# this list of conditions and the following disclaimer in the documentation
16# and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31[symbol-sets]
32sets = score,rtems,sapi,posix,librfs,libpipe,libdosfs,libimfs,libjffs2,libcsupport,libbspcmdline,libcpuuse,libstackchk,libfsmount,libstringto,libdevnull,libdumpbuf,libuntar,libuuid,libblock,libcrypt,libmd,libstdthreads,libtrace
33
34[libraries]
35score         = @BUILD-TARGET@/@BSP@/cpukit/score/src
36rtems         = @BUILD-TARGET@/@BSP@/cpukit/rtems/src
37sapi          = @BUILD-TARGET@/@BSP@/cpukit/sapi/src
38libdl         = @BUILD-TARGET@/@BSP@/cpukit/libdl
39posix         = @BUILD-TARGET@/@BSP@/cpukit/posix/src
40librfs        = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/rfs
41libpipe       = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/pipe
42libdosfs      = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/dosfs
43#libdevfs      = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/devfs
44libimfs       = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/imfs
45#libdefaultsfs = @BUiLD-TARGET@/@BSP@/cpukit/libfs
46libjffs2      = @BUILD-TARGET@/@BSP@/cpukit/libfs/src/jffs2/src
47#dtc           = @BUILD-TARGET@/@BSP@/cpukit/libfdt
48#libdrvmgr     = @BUILD-TARGET@/@BSP@/cpukit/libdrvmgr
49#libi2c        = @BUILD-TARGET@/@BSP@/cpukit/libi2c
50libcsupport   = @BUILD-TARGET@/@BSP@/cpukit/libcsupport/src
51libbspcmdline = @BUILD-TARGET@/@BSP@/cpukit/libmisc/bspcmdline
52libcpuuse     = @BUILD-TARGET@/@BSP@/cpukit/libmisc/cpuuse
53libstackchk   = @BUILD-TARGET@/@BSP@/cpukit/libmisc/stackchk
54libfsmount    = @BUILD-TARGET@/@BSP@/cpukit/libmisc/fsmount
55libstringto   = @BUILD-TARGET@/@BSP@/cpukit/libmisc/stringto
56libdevnull    = @BUILD-TARGET@/@BSP@/cpukit/libmisc/devnull
57libdumpbuf    = @BUILD-TARGET@/@BSP@/cpukit/libmisc/dumpbuf
58#libcapture    = @BUILD-TARGET@/@BSP@/cpukit/libmisc
59#libdummy      = @BUILD-TARGET@/@BSP@/cpukit/libmisc
60#libmonitor    = @BUILD-TARGET@/@BSP@/cpukit/libmisc
61#libmouse      = @BUILD-TARGET@/@BSP@/cpukit/libmisc
62#libmw-fb      = @BUILD-TARGET@/@BSP@/cpukit/libmisc
63#libredirector = @BUILD-TARGET@/@BSP@/cpukit/libmisc
64#librtemsfdt   = @BUILD-TARGET@/@BSP@/cpukit/libmisc
65#libserdbg     = @BUILD-TARGET@/@BSP@/cpukit/libmisc
66#libshell      = @BUILD-TARGET@/@BSP@/cpukit/libmisc
67#libtestsupport= @BUILD-TARGET@/@BSP@/cpukit/libmisc
68libuntar      = @BUILD-TARGET@/@BSP@/cpukit/libmisc/untar
69#libutf8proc   = @BUILD-TARGET@/@BSP@/cpukit/libmisc
70libuuid       = @BUILD-TARGET@/@BSP@/cpukit/libmisc/uuid
71#libxz         = @BUILD-TARGET@/@BSP@/cpukit/libmisc
72libblock      = @BUILD-TARGET@/@BSP@/cpukit/libblock/src
73#libpci        = @BUILD-TARGET@/@BSP@/cpukit/libpci
74#librpc        = @BUILD-TARGET@/@BSP@/cpukit/librpc
75#libxdr        = @BUILD-TARGET@/@BSP@/cpukit/librpc
76libcrypt      = @BUILD-TARGET@/@BSP@/cpukit/libcrypt
77libmd         = @BUILD-TARGET@/@BSP@/cpukit/libmd
78libstdthreads = @BUILD-TARGET@/@BSP@/cpukit/libstdthreads
79libtrace      = @BUILD-TARGET@/@BSP@/cpukit/libtrace/record
80#zlib          = @BUILD-TARGET@/@BSP@/cpukit/zlib
Note: See TracBrowser for help on using the repository browser.