source: rtems-tools/tester/rtems/testing/coverage/symbol-sets.ini @ 458a144

5
Last change on this file since 458a144 was 458a144, checked in by Vijay Kumar Banerjee <vijaykumar9597@…>, on 07/25/18 at 15:32:08

coverage/symbol-sets.ini : Add symbol-sets and paths to respective libraries
  • Property mode set to 100644
File size: 4.5 KB
Line 
1#
2# RTEMS Tools Project (http://www.rtems.org/)
3# Copyright 2018 Chris Johns (chrisj@rtems.org)
4# All rights reserved.
5#
6# This file is part of the RTEMS Tools package in 'rtems-tools'.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are met:
10#
11# 1. Redistributions of source code must retain the above copyright notice,
12# this list of conditions and the following disclaimer.
13#
14# 2. Redistributions in binary form must reproduce the above copyright notice,
15# this list of conditions and the following disclaimer in the documentation
16# and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31[symbol-sets]
32sets = score,rtems,sapi,libdl,posix,libirfs,libdosfs,libdevfs,libimfs,libcsupport,libbspcmdline,libcpuuse,libstackchk,libfsmount,libstringto,libdevnull,libdumpbuf,libblock
33
34[libraries]
35score         = @BUILD-TARGET@/c/@BSP@/cpukit/score/libscore.a
36rtems         = @BUILD-TARGET@/c/@BSP@/cpukit/rtems/librtems.a
37sapi          = @BUILD-TARGET@/c/@BSP@/cpukit/sapi/libsapi.a
38libdl         = @BUILD-TARGET@/c/@BSP@/cpukit/libdl/libdl.a
39posix         = @BUILD-TARGET@/c/@BSP@/cpukit/posix/libposix.a
40libirfs       = @BUILD-TARGET@/c/@BSP@/cpukit/libfs/librfs.a
41libdosfs      = @BUILD-TARGET@/c/@BSP@/cpukit/libfs/libdosfs.a
42libdevfs      = @BUILD-TARGET@/c/@BSP@/cpukit/libfs/libdevfs.a
43libimfs       = @BUILD-TARGET@/c/@BSP@/cpukit/libfs/libimfs.a
44#libdefaultsfs = @BUiLD-TARGET@/c/@BSP@/cpukit/libfs/libdefaultfs.a
45#libjffs2      = @BUILD-TARGET@/c/@BSP@/cpukit/libfs/libjffs2.a
46#dtc           = @BUILD-TARGET@/c/@BSP@/cpukit/libfdt/libfdt.a
47#libdrvmgr     = @BUILD-TARGET@/c/@BSP@/cpukit/libdrvmgr/libdrvmgr.a
48#libi2c        = @BUILD-TARGET@/c/@BSP@/cpukit/libi2c/libi2c.a
49libcsupport   = @BUILD-TARGET@/c/@BSP@/cpukit/libcsupport/libcsupport.a
50libbspcmdline = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libbspcmdline.a
51libcpuuse     = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libcpuuse.a
52libstackchk   = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libstackchk.a
53libfsmount    = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libfsmount.a
54libstringto   = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libstringto.a
55libdevnull    = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libdevnull.a
56libdumpbuf    = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libdumpbuf.a
57#libcapture    = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libcapture.a
58#libdummy      = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libdummy.a
59#libmonitor    = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libmonitor.a
60#libmouse      = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libmouse.a
61#libmw-fb      = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libmw-fb.a
62#libredirector = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libredirector.a
63#librtemsfdt   = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/librtemsfdt.a
64#libserdbg     = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libserdbg.a
65#libshell      = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libshell.a
66#libtestsupport= @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libtestsupport.a
67#libuntar      = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libuntar.a
68#libutf8proc   = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libutf8proc.a
69#libuuid       = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libuuid.a
70#libxz         = @BUILD-TARGET@/c/@BSP@/cpukit/libmisc/libxz.a
71libblock      = @BUILD-TARGET@/c/@BSP@/cpukit/libblock/libblock.a
72#libpci        = @BUILD-TARGET@/c/@BSP@/cpukit/libpci/libpci.a
73#librpc        = @BUILD-TARGET@/c/@BSP@/cpukit/librpc/librpc.a
74#libxdr        = @BUILD-TARGET@/c/@BSP@/cpukit/librpc/libxdr.a
75#libcrypt      = @BUILD-TARGET@/c/@BSP@/cpukit/libcrypt/libcrypt.a
76#libmd         = @BUILD-TARGET@/c/@BSP@/cpukit/libmd/libmd.a
77#libstdthreads = @BUILD-TARGET@/c/@BSP@/cpukit/libstdthreads/libstdthreads.a
78#zlib          = @BUILD-TARGET@/c/@BSP@/cpukit/zlib/libz.a
Note: See TracBrowser for help on using the repository browser.