source: rtems-tools/tester/rtems/testing/bsps/xilinx_zynq_zedboard.ini @ 41d0c34

5
Last change on this file since 41d0c34 was 41d0c34, checked in by Chris Johns <chrisj@…>, on Oct 24, 2017 at 10:03:43 PM

tester: Add a BSP field to each BSP INI configuration section.

The INI section in a BSP configuration is the name of the INI file so
each BSP configuration section needs a BSP.

Updates #3204.

  • Property mode set to 100644
File size: 1.9 KB
Line 
1#
2# RTEMS Tools Project (http://www.rtems.org/)
3# Copyright 2010-2017 Chris Johns (chrisj@rtems.org)
4# All rights reserved.
5#
6# This file is part of the RTEMS Tools package in 'rtems-tools'.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are met:
10#
11# 1. Redistributions of source code must retain the above copyright notice,
12# this list of conditions and the following disclaimer.
13#
14# 2. Redistributions in binary form must reproduce the above copyright notice,
15# this list of conditions and the following disclaimer in the documentation
16# and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31#
32# The Xilinx Zynq Zedboard and Microzed board connected via TFTP. The console
33# is connected to a telnet tty device.
34#
35[xilinx_zynq_zedboard]
36bsp                = xilinx_zynq_zedboard
37arch               = arm
38jobs               = 1
39tester             = %{_rtscripts}/tftp.cfg
40test_restarts      = 3
41target_reset_regex = ^No ethernet found.*|^BOOTP broadcast 6.*|^.+complete\.+ TIMEOUT.*
42target_start_regex = ^U-Boot SPL .*
43requires           = target_on_command, target_off_command, target_reset_command, bsp_tty_dev
Note: See TracBrowser for help on using the repository browser.