source: rtems-tools/tester/rtems/testing/bsps/xilinx_zynq_zc706.mc @ e98d5fa

4.104.115
Last change on this file since e98d5fa was 50fdf12, checked in by Chris Johns <chrisj@…>, on 02/14/14 at 19:30:06

rt: Add the rtems-tester.

  • Property mode set to 100644
File size: 2.9 KB
Line 
1#
2# RTEMS Tools Project (http://www.rtems.org/)
3# Copyright 2010-2014 Chris Johns (chrisj@rtems.org)
4# All rights reserved.
5#
6# This file is part of the RTEMS Tools package in 'rtems-tools'.
7#
8# Redistribution and use in source and binary forms, with or without
9# modification, are permitted provided that the following conditions are met:
10#
11# 1. Redistributions of source code must retain the above copyright notice,
12# this list of conditions and the following disclaimer.
13#
14# 2. Redistributions in binary form must reproduce the above copyright notice,
15# this list of conditions and the following disclaimer in the documentation
16# and/or other materials provided with the distribution.
17#
18# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
19# AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
20# IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
21# ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE
22# LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
23# CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
24# SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
25# INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
26# CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
27# ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
28# POSSIBILITY OF SUCH DAMAGE.
29#
30
31#
32# All paths in defaults must be Unix format. Do not store any Windows format
33# paths in the defaults.
34#
35# Every entry must describe the type of checking a host must pass.
36#
37# Records:
38#  key: type, attribute, value
39#   type     : none, dir, exe, triplet
40#   attribute: none, required, optional
41#   value    : 'single line', '''multi line'''
42#
43
44#
45# The Xilinx Zync ZC706 board connected via OpenOCD and a JTAG pod. The console
46# is connected to a tty device.
47#
48[global]
49bsp:                          none,    none,   'xilinx_zynq_zc706'
50jobs:                         none,    none,   '1'
51
52[xilinx_zynq_zc706]
53xilinx_zynq_zc706:            none,    none,   '%{_rtscripts}/gdb.cfg'
54xilinx_zynq_zc706_arch:       none,    none,   'arm'
55#bsp_tty_dev:                  none,    none,   '/dev/cuaU0'
56bsp_tty_dev:                  none,    none,   '/dev/cu.SLAB_USBtoUART'
57gdb_script:                   none,    none,   'xilinx_zynq_zc706_gdb_script'
58xilinx_zynq_zc706_gdb_script: none,    none,   '''target remote kaka:3333
59mon load_image /home/chris/development/si/work/hydra/boot/xilinx-zynq-fsbl/build/arm-rtems4.11-xilinx_zynq_zc706/hydra-fsbl.elf 0 elf
60                                                  mon resume 0
61                                                  mon sleep 4000
62                                                  mon halt
63                                                  load
64                                                  b bsp_reset
65                                                  continue'''
Note: See TracBrowser for help on using the repository browser.