source: rtems-source-builder/rtems/config/rtems-bsp.cfg @ 6444d58

4.104.95
Last change on this file since 6444d58 was 6444d58, checked in by Chris Johns <chrisj@…>, on Jul 20, 2015 at 3:49:42 AM

Canandian Cross Compiling and RTEMS 3rd party package building Fixes.

The change fixes installing for RTEMS 3rd Party packages where the
RSB considered them Canadian Cross Compiling (Cxc). Fixing the
Cxc issue broke real Cxc builds. The change corrects the issue of
macros being changed in the Cxc and the prep data not being udpated.
The configuration is loaded again after the updated macros. The
macros are also copied and restored to ensure a clean stable base.

The change also introduces --rtems-tools and --rtems-bsp to align
the command line with the waf configure process or RTEMS application.

  • Property mode set to 100644
File size: 2.9 KB
Line 
1#
2# RTEMS BSP Support
3#
4
5#
6# The RTEMS BSP support requires the host turple, the RTEMS BSP and the path to
7# the tools. The prefix is set to an installed RTEMS. The built package is
8# installed into the prefix.
9#
10# Keeping the package's installed path in the RTEMS install path and separate
11# to the tools lets the tools version vary independently. If --rtems-tools
12# (--with-tools) is not provided use the prefix.
13#
14
15%if %{_target} == %{nil}
16 %error No RTEMS target specified: --rtems-bsp=arch/bsp (or --target=target)
17%endif
18
19%if %{_host} != %{_build}
20 %error Canadian cross building for BSP is not supported.
21%endif
22
23%ifn %{defined with_rtems_bsp}
24 %error No RTEMS BSP specified: --rtems-bsp=arch/bsp (or --with-rtems-bsp=bsp)
25%endif
26
27%ifn %{defined with_tools}
28 %define with_tools %{_prefix}
29%endif
30
31#
32# Set the host to the target.
33#
34%define _host %{_target}
35
36#
37# Set the path to the tools.
38#
39%{path prepend %{with_tools}/bin}
40
41#
42# Set up how we manage pkgconfig. Set the prefix path to the RTEMS prefix,
43# enable support when crosscompiling, and filter specific optimisation and
44# warning from the flags that RTEMS exports.
45#
46%{pkgconfig prefix %{_prefix}/lib/pkgconfig}
47%{pkgconfig crosscompile yes}
48%{pkgconfig filter-flags yes}
49
50#
51# The RTEMS BSP Flags
52#
53%define rtems_bsp           %{with_rtems_bsp}
54%define rtems_bsp_ccflags   %{pkgconfig ccflags %{_host}-%{rtems_bsp}}
55%define rtems_bsp_cflags    %{pkgconfig cflags  %{_host}-%{rtems_bsp}}
56%define rtems_bsp_ldflags   %{pkgconfig ldflags %{_host}-%{rtems_bsp}}
57%define rtems_bsp_libs      %{pkgconfig libs    %{_host}-%{rtems_bsp}}
58
59%if %{rtems_bsp_cflags} == %{nil}
60 %error No RTEMS target CFLAGS found; Please check the --rtems-bsp option.
61%endif
62
63%if %{rtems_bsp_ccflags} == %{nil}
64  %define rtems_bsp_ccflags %{rtems_bsp_cflags}
65%endif
66
67#
68# Map to names used for cross compiling.
69#
70%define host_cflags   %{rtems_bsp_cflags}
71%define host_cxxflags %{rtems_bsp_ccflags}
72%define host_ldflags  %{rtems_bsp_ldflags}
73%define host_libs     %{rtems_bsp_libs}
74
75#
76# Update the configure paths to be BSP specific.
77#
78%define rtems_bsp_prefix  %{_prefix}/%{_host}/%{rtems_bsp}
79%define _exec_prefix      %{rtems_bsp_prefix}
80%define _bindir           %{_exec_prefix}/bin
81%define _sbindir          %{_exec_prefix}/sbin
82%define _libexecdir       %{_exec_prefix}/libexec
83%define _datarootdir      %{_exec_prefix}/share
84%define _datadir          %{_datarootdir}
85%define _sysconfdir       %{_exec_prefix}/etc
86%define _sharedstatedir   %{_exec_prefix}/com
87%define _localstatedir    %{_exec_prefix}/var
88%define _includedir       %{_libdir}/include
89%define _lib              lib
90%define _libdir           %{_exec_prefix}/%{_lib}
91%define _libexecdir       %{_exec_prefix}/libexec
92%define _mandir           %{_datarootdir}/man
93%define _infodir          %{_datarootdir}/info
94%define _localedir        %{_datarootdir}/locale
95%define _localedir        %{_datadir}/locale
96%define _localstatedir    %{_exec_prefix}/var
Note: See TracBrowser for help on using the repository browser.