source: rtems-libbsd/ipsec-tools/src/Makefile.in

6-freebsd-12
Last change on this file was ff36f5e, checked in by Christian Mauderer <christian.mauderer@…>, on 05/30/18 at 12:27:35

Import ipsec-tools 0.8.2.

Import unchanged ipsec-tools sources in the release version 0.8.2. The
homepage of ipsec-tools is ​http://ipsec-tools.sourceforge.net/. The
sources can be obtained from there.
  • Property mode set to 100644
File size: 18.0 KB
Line 
1# Makefile.in generated by automake 1.14.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16VPATH = @srcdir@
17am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
18am__make_running_with_option = \
19  case $${target_option-} in \
20      ?) ;; \
21      *) echo "am__make_running_with_option: internal error: invalid" \
22              "target option '$${target_option-}' specified" >&2; \
23         exit 1;; \
24  esac; \
25  has_opt=no; \
26  sane_makeflags=$$MAKEFLAGS; \
27  if $(am__is_gnu_make); then \
28    sane_makeflags=$$MFLAGS; \
29  else \
30    case $$MAKEFLAGS in \
31      *\\[\ \   ]*) \
32        bs=\\; \
33        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
34          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
35    esac; \
36  fi; \
37  skip_next=no; \
38  strip_trailopt () \
39  { \
40    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
41  }; \
42  for flg in $$sane_makeflags; do \
43    test $$skip_next = yes && { skip_next=no; continue; }; \
44    case $$flg in \
45      *=*|--*) continue;; \
46        -*I) strip_trailopt 'I'; skip_next=yes;; \
47      -*I?*) strip_trailopt 'I';; \
48        -*O) strip_trailopt 'O'; skip_next=yes;; \
49      -*O?*) strip_trailopt 'O';; \
50        -*l) strip_trailopt 'l'; skip_next=yes;; \
51      -*l?*) strip_trailopt 'l';; \
52      -[dEDm]) skip_next=yes;; \
53      -[JT]) skip_next=yes;; \
54    esac; \
55    case $$flg in \
56      *$$target_option*) has_opt=yes; break;; \
57    esac; \
58  done; \
59  test $$has_opt = yes
60am__make_dryrun = (target_option=n; $(am__make_running_with_option))
61am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
62pkgdatadir = $(datadir)/@PACKAGE@
63pkgincludedir = $(includedir)/@PACKAGE@
64pkglibdir = $(libdir)/@PACKAGE@
65pkglibexecdir = $(libexecdir)/@PACKAGE@
66am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
67install_sh_DATA = $(install_sh) -c -m 644
68install_sh_PROGRAM = $(install_sh) -c
69install_sh_SCRIPT = $(install_sh) -c
70INSTALL_HEADER = $(INSTALL_DATA)
71transform = $(program_transform_name)
72NORMAL_INSTALL = :
73PRE_INSTALL = :
74POST_INSTALL = :
75NORMAL_UNINSTALL = :
76PRE_UNINSTALL = :
77POST_UNINSTALL = :
78build_triplet = @build@
79host_triplet = @host@
80subdir = src
81DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
82ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
83am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
84        $(top_srcdir)/configure.ac
85am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
86        $(ACLOCAL_M4)
87mkinstalldirs = $(install_sh) -d
88CONFIG_HEADER = $(top_builddir)/config.h
89CONFIG_CLEAN_FILES =
90CONFIG_CLEAN_VPATH_FILES =
91AM_V_P = $(am__v_P_@AM_V@)
92am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
93am__v_P_0 = false
94am__v_P_1 = :
95AM_V_GEN = $(am__v_GEN_@AM_V@)
96am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
97am__v_GEN_0 = @echo "  GEN     " $@;
98am__v_GEN_1 =
99AM_V_at = $(am__v_at_@AM_V@)
100am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
101am__v_at_0 = @
102am__v_at_1 =
103SOURCES =
104DIST_SOURCES =
105RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
106        ctags-recursive dvi-recursive html-recursive info-recursive \
107        install-data-recursive install-dvi-recursive \
108        install-exec-recursive install-html-recursive \
109        install-info-recursive install-pdf-recursive \
110        install-ps-recursive install-recursive installcheck-recursive \
111        installdirs-recursive pdf-recursive ps-recursive \
112        tags-recursive uninstall-recursive
113am__can_run_installinfo = \
114  case $$AM_UPDATE_INFO_DIR in \
115    n|no|NO) false;; \
116    *) (install-info --version) >/dev/null 2>&1;; \
117  esac
118RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
119  distclean-recursive maintainer-clean-recursive
120am__recursive_targets = \
121  $(RECURSIVE_TARGETS) \
122  $(RECURSIVE_CLEAN_TARGETS) \
123  $(am__extra_recursive_targets)
124AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
125        distdir
126am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
127# Read a list of newline-separated strings from the standard input,
128# and print each of them once, without duplicates.  Input order is
129# *not* preserved.
130am__uniquify_input = $(AWK) '\
131  BEGIN { nonempty = 0; } \
132  { items[$$0] = 1; nonempty = 1; } \
133  END { if (nonempty) { for (i in items) print i; }; } \
134'
135# Make sure the list of sources is unique.  This is necessary because,
136# e.g., the same source file might be shared among _SOURCES variables
137# for different programs/libraries.
138am__define_uniq_tagged_files = \
139  list='$(am__tagged_files)'; \
140  unique=`for i in $$list; do \
141    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
142  done | $(am__uniquify_input)`
143ETAGS = etags
144CTAGS = ctags
145DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
146am__relativize = \
147  dir0=`pwd`; \
148  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
149  sed_rest='s,^[^/]*/*,,'; \
150  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
151  sed_butlast='s,/*[^/]*$$,,'; \
152  while test -n "$$dir1"; do \
153    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
154    if test "$$first" != "."; then \
155      if test "$$first" = ".."; then \
156        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
157        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
158      else \
159        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
160        if test "$$first2" = "$$first"; then \
161          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
162        else \
163          dir2="../$$dir2"; \
164        fi; \
165        dir0="$$dir0"/"$$first"; \
166      fi; \
167    fi; \
168    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
169  done; \
170  reldir="$$dir2"
171ACLOCAL = @ACLOCAL@
172AMTAR = @AMTAR@
173AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
174AR = @AR@
175AUTOCONF = @AUTOCONF@
176AUTOHEADER = @AUTOHEADER@
177AUTOMAKE = @AUTOMAKE@
178AWK = @AWK@
179CC = @CC@
180CCDEPMODE = @CCDEPMODE@
181CFLAGS = @CFLAGS@
182CONFIGURE_AMFLAGS = @CONFIGURE_AMFLAGS@
183CPP = @CPP@
184CPPFLAGS = @CPPFLAGS@
185CRYPTOBJS = @CRYPTOBJS@
186CYGPATH_W = @CYGPATH_W@
187DEFS = @DEFS@
188DEPDIR = @DEPDIR@
189DLLTOOL = @DLLTOOL@
190DSYMUTIL = @DSYMUTIL@
191DUMPBIN = @DUMPBIN@
192ECHO_C = @ECHO_C@
193ECHO_N = @ECHO_N@
194ECHO_T = @ECHO_T@
195EGREP = @EGREP@
196EXEEXT = @EXEEXT@
197EXTRA_CRYPTO = @EXTRA_CRYPTO@
198FGREP = @FGREP@
199FRAG_OBJS = @FRAG_OBJS@
200GLIBC_BUGS = @GLIBC_BUGS@
201GREP = @GREP@
202HYBRID_OBJS = @HYBRID_OBJS@
203INCLUDE_GLIBC = @INCLUDE_GLIBC@
204INSTALL = @INSTALL@
205INSTALL_DATA = @INSTALL_DATA@
206INSTALL_OPTS = @INSTALL_OPTS@
207INSTALL_PROGRAM = @INSTALL_PROGRAM@
208INSTALL_SCRIPT = @INSTALL_SCRIPT@
209INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
210KERNEL_INCLUDE = @KERNEL_INCLUDE@
211KRB5_CONFIG = @KRB5_CONFIG@
212LD = @LD@
213LDFLAGS = @LDFLAGS@
214LEX = @LEX@
215LEXLIB = @LEXLIB@
216LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
217LIBOBJS = @LIBOBJS@
218LIBS = @LIBS@
219LIBTOOL = @LIBTOOL@
220LIPO = @LIPO@
221LN_S = @LN_S@
222LTLIBOBJS = @LTLIBOBJS@
223MAKEINFO = @MAKEINFO@
224MANIFEST_TOOL = @MANIFEST_TOOL@
225MKDIR_P = @MKDIR_P@
226NATT_OBJS = @NATT_OBJS@
227NM = @NM@
228NMEDIT = @NMEDIT@
229OBJDUMP = @OBJDUMP@
230OBJEXT = @OBJEXT@
231OTOOL = @OTOOL@
232OTOOL64 = @OTOOL64@
233PACKAGE = @PACKAGE@
234PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
235PACKAGE_NAME = @PACKAGE_NAME@
236PACKAGE_STRING = @PACKAGE_STRING@
237PACKAGE_TARNAME = @PACKAGE_TARNAME@
238PACKAGE_URL = @PACKAGE_URL@
239PACKAGE_VERSION = @PACKAGE_VERSION@
240PATH_SEPARATOR = @PATH_SEPARATOR@
241RANLIB = @RANLIB@
242RPM = @RPM@
243SECCTX_OBJS = @SECCTX_OBJS@
244SED = @SED@
245SET_MAKE = @SET_MAKE@
246SHELL = @SHELL@
247STRIP = @STRIP@
248VERSION = @VERSION@
249YACC = @YACC@
250YFLAGS = @YFLAGS@
251abs_builddir = @abs_builddir@
252abs_srcdir = @abs_srcdir@
253abs_top_builddir = @abs_top_builddir@
254abs_top_srcdir = @abs_top_srcdir@
255ac_ct_AR = @ac_ct_AR@
256ac_ct_CC = @ac_ct_CC@
257ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
258am__include = @am__include@
259am__leading_dot = @am__leading_dot@
260am__quote = @am__quote@
261am__tar = @am__tar@
262am__untar = @am__untar@
263bindir = @bindir@
264build = @build@
265build_alias = @build_alias@
266build_cpu = @build_cpu@
267build_os = @build_os@
268build_vendor = @build_vendor@
269builddir = @builddir@
270datadir = @datadir@
271datarootdir = @datarootdir@
272docdir = @docdir@
273dvidir = @dvidir@
274exec_prefix = @exec_prefix@
275host = @host@
276host_alias = @host_alias@
277host_cpu = @host_cpu@
278host_os = @host_os@
279host_vendor = @host_vendor@
280htmldir = @htmldir@
281include_racoondir = @include_racoondir@
282includedir = @includedir@
283infodir = @infodir@
284install_sh = @install_sh@
285libdir = @libdir@
286libexecdir = @libexecdir@
287localedir = @localedir@
288localstatedir = @localstatedir@
289mandir = @mandir@
290mkdir_p = @mkdir_p@
291oldincludedir = @oldincludedir@
292pdfdir = @pdfdir@
293prefix = @prefix@
294program_transform_name = @program_transform_name@
295psdir = @psdir@
296sbindir = @sbindir@
297sharedstatedir = @sharedstatedir@
298srcdir = @srcdir@
299sysconfdir = @sysconfdir@
300target_alias = @target_alias@
301top_build_prefix = @top_build_prefix@
302top_builddir = @top_builddir@
303top_srcdir = @top_srcdir@
304SUBDIRS = @INCLUDE_GLIBC@ libipsec setkey racoon
305DIST_SUBDIRS = include-glibc libipsec setkey racoon
306all: all-recursive
307
308.SUFFIXES:
309$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
310        @for dep in $?; do \
311          case '$(am__configure_deps)' in \
312            *$$dep*) \
313              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
314                && { if test -f $@; then exit 0; else break; fi; }; \
315              exit 1;; \
316          esac; \
317        done; \
318        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign src/Makefile'; \
319        $(am__cd) $(top_srcdir) && \
320          $(AUTOMAKE) --foreign src/Makefile
321.PRECIOUS: Makefile
322Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
323        @case '$?' in \
324          *config.status*) \
325            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
326          *) \
327            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
328            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
329        esac;
330
331$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
332        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
333
334$(top_srcdir)/configure:  $(am__configure_deps)
335        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
336$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
337        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
338$(am__aclocal_m4_deps):
339
340mostlyclean-libtool:
341        -rm -f *.lo
342
343clean-libtool:
344        -rm -rf .libs _libs
345
346# This directory's subdirectories are mostly independent; you can cd
347# into them and run 'make' without going through this Makefile.
348# To change the values of 'make' variables: instead of editing Makefiles,
349# (1) if the variable is set in 'config.status', edit 'config.status'
350#     (which will cause the Makefiles to be regenerated when you run 'make');
351# (2) otherwise, pass the desired values on the 'make' command line.
352$(am__recursive_targets):
353        @fail=; \
354        if $(am__make_keepgoing); then \
355          failcom='fail=yes'; \
356        else \
357          failcom='exit 1'; \
358        fi; \
359        dot_seen=no; \
360        target=`echo $@ | sed s/-recursive//`; \
361        case "$@" in \
362          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
363          *) list='$(SUBDIRS)' ;; \
364        esac; \
365        for subdir in $$list; do \
366          echo "Making $$target in $$subdir"; \
367          if test "$$subdir" = "."; then \
368            dot_seen=yes; \
369            local_target="$$target-am"; \
370          else \
371            local_target="$$target"; \
372          fi; \
373          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
374          || eval $$failcom; \
375        done; \
376        if test "$$dot_seen" = "no"; then \
377          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
378        fi; test -z "$$fail"
379
380ID: $(am__tagged_files)
381        $(am__define_uniq_tagged_files); mkid -fID $$unique
382tags: tags-recursive
383TAGS: tags
384
385tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
386        set x; \
387        here=`pwd`; \
388        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
389          include_option=--etags-include; \
390          empty_fix=.; \
391        else \
392          include_option=--include; \
393          empty_fix=; \
394        fi; \
395        list='$(SUBDIRS)'; for subdir in $$list; do \
396          if test "$$subdir" = .; then :; else \
397            test ! -f $$subdir/TAGS || \
398              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
399          fi; \
400        done; \
401        $(am__define_uniq_tagged_files); \
402        shift; \
403        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
404          test -n "$$unique" || unique=$$empty_fix; \
405          if test $$# -gt 0; then \
406            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
407              "$$@" $$unique; \
408          else \
409            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
410              $$unique; \
411          fi; \
412        fi
413ctags: ctags-recursive
414
415CTAGS: ctags
416ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
417        $(am__define_uniq_tagged_files); \
418        test -z "$(CTAGS_ARGS)$$unique" \
419          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
420             $$unique
421
422GTAGS:
423        here=`$(am__cd) $(top_builddir) && pwd` \
424          && $(am__cd) $(top_srcdir) \
425          && gtags -i $(GTAGS_ARGS) "$$here"
426cscopelist: cscopelist-recursive
427
428cscopelist-am: $(am__tagged_files)
429        list='$(am__tagged_files)'; \
430        case "$(srcdir)" in \
431          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
432          *) sdir=$(subdir)/$(srcdir) ;; \
433        esac; \
434        for i in $$list; do \
435          if test -f "$$i"; then \
436            echo "$(subdir)/$$i"; \
437          else \
438            echo "$$sdir/$$i"; \
439          fi; \
440        done >> $(top_builddir)/cscope.files
441
442distclean-tags:
443        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
444
445distdir: $(DISTFILES)
446        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
447        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
448        list='$(DISTFILES)'; \
449          dist_files=`for file in $$list; do echo $$file; done | \
450          sed -e "s|^$$srcdirstrip/||;t" \
451              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
452        case $$dist_files in \
453          */*) $(MKDIR_P) `echo "$$dist_files" | \
454                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
455                           sort -u` ;; \
456        esac; \
457        for file in $$dist_files; do \
458          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
459          if test -d $$d/$$file; then \
460            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
461            if test -d "$(distdir)/$$file"; then \
462              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
463            fi; \
464            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
465              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
466              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
467            fi; \
468            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
469          else \
470            test -f "$(distdir)/$$file" \
471            || cp -p $$d/$$file "$(distdir)/$$file" \
472            || exit 1; \
473          fi; \
474        done
475        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
476          if test "$$subdir" = .; then :; else \
477            $(am__make_dryrun) \
478              || test -d "$(distdir)/$$subdir" \
479              || $(MKDIR_P) "$(distdir)/$$subdir" \
480              || exit 1; \
481            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
482            $(am__relativize); \
483            new_distdir=$$reldir; \
484            dir1=$$subdir; dir2="$(top_distdir)"; \
485            $(am__relativize); \
486            new_top_distdir=$$reldir; \
487            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
488            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
489            ($(am__cd) $$subdir && \
490              $(MAKE) $(AM_MAKEFLAGS) \
491                top_distdir="$$new_top_distdir" \
492                distdir="$$new_distdir" \
493                am__remove_distdir=: \
494                am__skip_length_check=: \
495                am__skip_mode_fix=: \
496                distdir) \
497              || exit 1; \
498          fi; \
499        done
500check-am: all-am
501check: check-recursive
502all-am: Makefile
503installdirs: installdirs-recursive
504installdirs-am:
505install: install-recursive
506install-exec: install-exec-recursive
507install-data: install-data-recursive
508uninstall: uninstall-recursive
509
510install-am: all-am
511        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
512
513installcheck: installcheck-recursive
514install-strip:
515        if test -z '$(STRIP)'; then \
516          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
517            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
518              install; \
519        else \
520          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
521            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
522            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
523        fi
524mostlyclean-generic:
525
526clean-generic:
527
528distclean-generic:
529        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
530        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
531
532maintainer-clean-generic:
533        @echo "This command is intended for maintainers to use"
534        @echo "it deletes files that may require special tools to rebuild."
535clean: clean-recursive
536
537clean-am: clean-generic clean-libtool mostlyclean-am
538
539distclean: distclean-recursive
540        -rm -f Makefile
541distclean-am: clean-am distclean-generic distclean-tags
542
543dvi: dvi-recursive
544
545dvi-am:
546
547html: html-recursive
548
549html-am:
550
551info: info-recursive
552
553info-am:
554
555install-data-am:
556
557install-dvi: install-dvi-recursive
558
559install-dvi-am:
560
561install-exec-am:
562
563install-html: install-html-recursive
564
565install-html-am:
566
567install-info: install-info-recursive
568
569install-info-am:
570
571install-man:
572
573install-pdf: install-pdf-recursive
574
575install-pdf-am:
576
577install-ps: install-ps-recursive
578
579install-ps-am:
580
581installcheck-am:
582
583maintainer-clean: maintainer-clean-recursive
584        -rm -f Makefile
585maintainer-clean-am: distclean-am maintainer-clean-generic
586
587mostlyclean: mostlyclean-recursive
588
589mostlyclean-am: mostlyclean-generic mostlyclean-libtool
590
591pdf: pdf-recursive
592
593pdf-am:
594
595ps: ps-recursive
596
597ps-am:
598
599uninstall-am:
600
601.MAKE: $(am__recursive_targets) install-am install-strip
602
603.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
604        check-am clean clean-generic clean-libtool cscopelist-am ctags \
605        ctags-am distclean distclean-generic distclean-libtool \
606        distclean-tags distdir dvi dvi-am html html-am info info-am \
607        install install-am install-data install-data-am install-dvi \
608        install-dvi-am install-exec install-exec-am install-html \
609        install-html-am install-info install-info-am install-man \
610        install-pdf install-pdf-am install-ps install-ps-am \
611        install-strip installcheck installcheck-am installdirs \
612        installdirs-am maintainer-clean maintainer-clean-generic \
613        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
614        ps ps-am tags tags-am uninstall uninstall-am
615
616
617# Tell versions [3.59,3.63) of GNU make to not export all variables.
618# Otherwise a system limit (for SysV at least) may be exceeded.
619.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.