source: rtems-libbsd/ipsec-tools/rpm/Makefile.in @ ff36f5e

5-freebsd-12
Last change on this file since ff36f5e was ff36f5e, checked in by Christian Mauderer <christian.mauderer@…>, on May 30, 2018 at 12:27:35 PM

Import ipsec-tools 0.8.2.

Import unchanged ipsec-tools sources in the release version 0.8.2. The
homepage of ipsec-tools is http://ipsec-tools.sourceforge.net/. The
sources can be obtained from there.

  • Property mode set to 100644
File size: 18.3 KB
Line 
1# Makefile.in generated by automake 1.14.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16VPATH = @srcdir@
17am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
18am__make_running_with_option = \
19  case $${target_option-} in \
20      ?) ;; \
21      *) echo "am__make_running_with_option: internal error: invalid" \
22              "target option '$${target_option-}' specified" >&2; \
23         exit 1;; \
24  esac; \
25  has_opt=no; \
26  sane_makeflags=$$MAKEFLAGS; \
27  if $(am__is_gnu_make); then \
28    sane_makeflags=$$MFLAGS; \
29  else \
30    case $$MAKEFLAGS in \
31      *\\[\ \   ]*) \
32        bs=\\; \
33        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
34          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
35    esac; \
36  fi; \
37  skip_next=no; \
38  strip_trailopt () \
39  { \
40    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
41  }; \
42  for flg in $$sane_makeflags; do \
43    test $$skip_next = yes && { skip_next=no; continue; }; \
44    case $$flg in \
45      *=*|--*) continue;; \
46        -*I) strip_trailopt 'I'; skip_next=yes;; \
47      -*I?*) strip_trailopt 'I';; \
48        -*O) strip_trailopt 'O'; skip_next=yes;; \
49      -*O?*) strip_trailopt 'O';; \
50        -*l) strip_trailopt 'l'; skip_next=yes;; \
51      -*l?*) strip_trailopt 'l';; \
52      -[dEDm]) skip_next=yes;; \
53      -[JT]) skip_next=yes;; \
54    esac; \
55    case $$flg in \
56      *$$target_option*) has_opt=yes; break;; \
57    esac; \
58  done; \
59  test $$has_opt = yes
60am__make_dryrun = (target_option=n; $(am__make_running_with_option))
61am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
62pkgdatadir = $(datadir)/@PACKAGE@
63pkgincludedir = $(includedir)/@PACKAGE@
64pkglibdir = $(libdir)/@PACKAGE@
65pkglibexecdir = $(libexecdir)/@PACKAGE@
66am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
67install_sh_DATA = $(install_sh) -c -m 644
68install_sh_PROGRAM = $(install_sh) -c
69install_sh_SCRIPT = $(install_sh) -c
70INSTALL_HEADER = $(INSTALL_DATA)
71transform = $(program_transform_name)
72NORMAL_INSTALL = :
73PRE_INSTALL = :
74POST_INSTALL = :
75NORMAL_UNINSTALL = :
76PRE_UNINSTALL = :
77POST_UNINSTALL = :
78build_triplet = @build@
79host_triplet = @host@
80subdir = rpm
81DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
82ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
83am__aclocal_m4_deps = $(top_srcdir)/acracoon.m4 \
84        $(top_srcdir)/configure.ac
85am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
86        $(ACLOCAL_M4)
87mkinstalldirs = $(install_sh) -d
88CONFIG_HEADER = $(top_builddir)/config.h
89CONFIG_CLEAN_FILES =
90CONFIG_CLEAN_VPATH_FILES =
91AM_V_P = $(am__v_P_@AM_V@)
92am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
93am__v_P_0 = false
94am__v_P_1 = :
95AM_V_GEN = $(am__v_GEN_@AM_V@)
96am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
97am__v_GEN_0 = @echo "  GEN     " $@;
98am__v_GEN_1 =
99AM_V_at = $(am__v_at_@AM_V@)
100am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
101am__v_at_0 = @
102am__v_at_1 =
103SOURCES =
104DIST_SOURCES =
105RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
106        ctags-recursive dvi-recursive html-recursive info-recursive \
107        install-data-recursive install-dvi-recursive \
108        install-exec-recursive install-html-recursive \
109        install-info-recursive install-pdf-recursive \
110        install-ps-recursive install-recursive installcheck-recursive \
111        installdirs-recursive pdf-recursive ps-recursive \
112        tags-recursive uninstall-recursive
113am__can_run_installinfo = \
114  case $$AM_UPDATE_INFO_DIR in \
115    n|no|NO) false;; \
116    *) (install-info --version) >/dev/null 2>&1;; \
117  esac
118RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
119  distclean-recursive maintainer-clean-recursive
120am__recursive_targets = \
121  $(RECURSIVE_TARGETS) \
122  $(RECURSIVE_CLEAN_TARGETS) \
123  $(am__extra_recursive_targets)
124AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
125        distdir
126am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
127# Read a list of newline-separated strings from the standard input,
128# and print each of them once, without duplicates.  Input order is
129# *not* preserved.
130am__uniquify_input = $(AWK) '\
131  BEGIN { nonempty = 0; } \
132  { items[$$0] = 1; nonempty = 1; } \
133  END { if (nonempty) { for (i in items) print i; }; } \
134'
135# Make sure the list of sources is unique.  This is necessary because,
136# e.g., the same source file might be shared among _SOURCES variables
137# for different programs/libraries.
138am__define_uniq_tagged_files = \
139  list='$(am__tagged_files)'; \
140  unique=`for i in $$list; do \
141    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
142  done | $(am__uniquify_input)`
143ETAGS = etags
144CTAGS = ctags
145DIST_SUBDIRS = $(SUBDIRS)
146DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
147am__relativize = \
148  dir0=`pwd`; \
149  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
150  sed_rest='s,^[^/]*/*,,'; \
151  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
152  sed_butlast='s,/*[^/]*$$,,'; \
153  while test -n "$$dir1"; do \
154    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
155    if test "$$first" != "."; then \
156      if test "$$first" = ".."; then \
157        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
158        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
159      else \
160        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
161        if test "$$first2" = "$$first"; then \
162          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
163        else \
164          dir2="../$$dir2"; \
165        fi; \
166        dir0="$$dir0"/"$$first"; \
167      fi; \
168    fi; \
169    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
170  done; \
171  reldir="$$dir2"
172ACLOCAL = @ACLOCAL@
173AMTAR = @AMTAR@
174AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
175AR = @AR@
176AUTOCONF = @AUTOCONF@
177AUTOHEADER = @AUTOHEADER@
178AUTOMAKE = @AUTOMAKE@
179AWK = @AWK@
180CC = @CC@
181CCDEPMODE = @CCDEPMODE@
182CFLAGS = @CFLAGS@
183CONFIGURE_AMFLAGS = @CONFIGURE_AMFLAGS@
184CPP = @CPP@
185CPPFLAGS = @CPPFLAGS@
186CRYPTOBJS = @CRYPTOBJS@
187CYGPATH_W = @CYGPATH_W@
188DEFS = @DEFS@
189DEPDIR = @DEPDIR@
190DLLTOOL = @DLLTOOL@
191DSYMUTIL = @DSYMUTIL@
192DUMPBIN = @DUMPBIN@
193ECHO_C = @ECHO_C@
194ECHO_N = @ECHO_N@
195ECHO_T = @ECHO_T@
196EGREP = @EGREP@
197EXEEXT = @EXEEXT@
198EXTRA_CRYPTO = @EXTRA_CRYPTO@
199FGREP = @FGREP@
200FRAG_OBJS = @FRAG_OBJS@
201GLIBC_BUGS = @GLIBC_BUGS@
202GREP = @GREP@
203HYBRID_OBJS = @HYBRID_OBJS@
204INCLUDE_GLIBC = @INCLUDE_GLIBC@
205INSTALL = @INSTALL@
206INSTALL_DATA = @INSTALL_DATA@
207INSTALL_OPTS = @INSTALL_OPTS@
208INSTALL_PROGRAM = @INSTALL_PROGRAM@
209INSTALL_SCRIPT = @INSTALL_SCRIPT@
210INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
211KERNEL_INCLUDE = @KERNEL_INCLUDE@
212KRB5_CONFIG = @KRB5_CONFIG@
213LD = @LD@
214LDFLAGS = @LDFLAGS@
215LEX = @LEX@
216LEXLIB = @LEXLIB@
217LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@
218LIBOBJS = @LIBOBJS@
219LIBS = @LIBS@
220LIBTOOL = @LIBTOOL@
221LIPO = @LIPO@
222LN_S = @LN_S@
223LTLIBOBJS = @LTLIBOBJS@
224MAKEINFO = @MAKEINFO@
225MANIFEST_TOOL = @MANIFEST_TOOL@
226MKDIR_P = @MKDIR_P@
227NATT_OBJS = @NATT_OBJS@
228NM = @NM@
229NMEDIT = @NMEDIT@
230OBJDUMP = @OBJDUMP@
231OBJEXT = @OBJEXT@
232OTOOL = @OTOOL@
233OTOOL64 = @OTOOL64@
234PACKAGE = @PACKAGE@
235PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
236PACKAGE_NAME = @PACKAGE_NAME@
237PACKAGE_STRING = @PACKAGE_STRING@
238PACKAGE_TARNAME = @PACKAGE_TARNAME@
239PACKAGE_URL = @PACKAGE_URL@
240PACKAGE_VERSION = @PACKAGE_VERSION@
241PATH_SEPARATOR = @PATH_SEPARATOR@
242RANLIB = @RANLIB@
243RPM = @RPM@
244SECCTX_OBJS = @SECCTX_OBJS@
245SED = @SED@
246SET_MAKE = @SET_MAKE@
247SHELL = @SHELL@
248STRIP = @STRIP@
249VERSION = @VERSION@
250YACC = @YACC@
251YFLAGS = @YFLAGS@
252abs_builddir = @abs_builddir@
253abs_srcdir = @abs_srcdir@
254abs_top_builddir = @abs_top_builddir@
255abs_top_srcdir = @abs_top_srcdir@
256ac_ct_AR = @ac_ct_AR@
257ac_ct_CC = @ac_ct_CC@
258ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
259am__include = @am__include@
260am__leading_dot = @am__leading_dot@
261am__quote = @am__quote@
262am__tar = @am__tar@
263am__untar = @am__untar@
264bindir = @bindir@
265build = @build@
266build_alias = @build_alias@
267build_cpu = @build_cpu@
268build_os = @build_os@
269build_vendor = @build_vendor@
270builddir = @builddir@
271datadir = @datadir@
272datarootdir = @datarootdir@
273docdir = @docdir@
274dvidir = @dvidir@
275exec_prefix = @exec_prefix@
276host = @host@
277host_alias = @host_alias@
278host_cpu = @host_cpu@
279host_os = @host_os@
280host_vendor = @host_vendor@
281htmldir = @htmldir@
282include_racoondir = @include_racoondir@
283includedir = @includedir@
284infodir = @infodir@
285install_sh = @install_sh@
286libdir = @libdir@
287libexecdir = @libexecdir@
288localedir = @localedir@
289localstatedir = @localstatedir@
290mandir = @mandir@
291mkdir_p = @mkdir_p@
292oldincludedir = @oldincludedir@
293pdfdir = @pdfdir@
294prefix = @prefix@
295program_transform_name = @program_transform_name@
296psdir = @psdir@
297sbindir = @sbindir@
298sharedstatedir = @sharedstatedir@
299srcdir = @srcdir@
300sysconfdir = @sysconfdir@
301target_alias = @target_alias@
302top_build_prefix = @top_build_prefix@
303top_builddir = @top_builddir@
304top_srcdir = @top_srcdir@
305SUBDIRS = suse
306EXTRA_DIST = \
307  ipsec-tools.spec.in
308
309CLEANFILES = ipsec-tools.spec
310all: all-recursive
311
312.SUFFIXES:
313$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
314        @for dep in $?; do \
315          case '$(am__configure_deps)' in \
316            *$$dep*) \
317              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
318                && { if test -f $@; then exit 0; else break; fi; }; \
319              exit 1;; \
320          esac; \
321        done; \
322        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign rpm/Makefile'; \
323        $(am__cd) $(top_srcdir) && \
324          $(AUTOMAKE) --foreign rpm/Makefile
325.PRECIOUS: Makefile
326Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
327        @case '$?' in \
328          *config.status*) \
329            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
330          *) \
331            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
332            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
333        esac;
334
335$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
336        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
337
338$(top_srcdir)/configure:  $(am__configure_deps)
339        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
340$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
341        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
342$(am__aclocal_m4_deps):
343
344mostlyclean-libtool:
345        -rm -f *.lo
346
347clean-libtool:
348        -rm -rf .libs _libs
349
350# This directory's subdirectories are mostly independent; you can cd
351# into them and run 'make' without going through this Makefile.
352# To change the values of 'make' variables: instead of editing Makefiles,
353# (1) if the variable is set in 'config.status', edit 'config.status'
354#     (which will cause the Makefiles to be regenerated when you run 'make');
355# (2) otherwise, pass the desired values on the 'make' command line.
356$(am__recursive_targets):
357        @fail=; \
358        if $(am__make_keepgoing); then \
359          failcom='fail=yes'; \
360        else \
361          failcom='exit 1'; \
362        fi; \
363        dot_seen=no; \
364        target=`echo $@ | sed s/-recursive//`; \
365        case "$@" in \
366          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
367          *) list='$(SUBDIRS)' ;; \
368        esac; \
369        for subdir in $$list; do \
370          echo "Making $$target in $$subdir"; \
371          if test "$$subdir" = "."; then \
372            dot_seen=yes; \
373            local_target="$$target-am"; \
374          else \
375            local_target="$$target"; \
376          fi; \
377          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
378          || eval $$failcom; \
379        done; \
380        if test "$$dot_seen" = "no"; then \
381          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
382        fi; test -z "$$fail"
383
384ID: $(am__tagged_files)
385        $(am__define_uniq_tagged_files); mkid -fID $$unique
386tags: tags-recursive
387TAGS: tags
388
389tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
390        set x; \
391        here=`pwd`; \
392        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
393          include_option=--etags-include; \
394          empty_fix=.; \
395        else \
396          include_option=--include; \
397          empty_fix=; \
398        fi; \
399        list='$(SUBDIRS)'; for subdir in $$list; do \
400          if test "$$subdir" = .; then :; else \
401            test ! -f $$subdir/TAGS || \
402              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
403          fi; \
404        done; \
405        $(am__define_uniq_tagged_files); \
406        shift; \
407        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
408          test -n "$$unique" || unique=$$empty_fix; \
409          if test $$# -gt 0; then \
410            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
411              "$$@" $$unique; \
412          else \
413            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
414              $$unique; \
415          fi; \
416        fi
417ctags: ctags-recursive
418
419CTAGS: ctags
420ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
421        $(am__define_uniq_tagged_files); \
422        test -z "$(CTAGS_ARGS)$$unique" \
423          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
424             $$unique
425
426GTAGS:
427        here=`$(am__cd) $(top_builddir) && pwd` \
428          && $(am__cd) $(top_srcdir) \
429          && gtags -i $(GTAGS_ARGS) "$$here"
430cscopelist: cscopelist-recursive
431
432cscopelist-am: $(am__tagged_files)
433        list='$(am__tagged_files)'; \
434        case "$(srcdir)" in \
435          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
436          *) sdir=$(subdir)/$(srcdir) ;; \
437        esac; \
438        for i in $$list; do \
439          if test -f "$$i"; then \
440            echo "$(subdir)/$$i"; \
441          else \
442            echo "$$sdir/$$i"; \
443          fi; \
444        done >> $(top_builddir)/cscope.files
445
446distclean-tags:
447        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
448
449distdir: $(DISTFILES)
450        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
451        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
452        list='$(DISTFILES)'; \
453          dist_files=`for file in $$list; do echo $$file; done | \
454          sed -e "s|^$$srcdirstrip/||;t" \
455              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
456        case $$dist_files in \
457          */*) $(MKDIR_P) `echo "$$dist_files" | \
458                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
459                           sort -u` ;; \
460        esac; \
461        for file in $$dist_files; do \
462          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
463          if test -d $$d/$$file; then \
464            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
465            if test -d "$(distdir)/$$file"; then \
466              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
467            fi; \
468            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
469              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
470              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
471            fi; \
472            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
473          else \
474            test -f "$(distdir)/$$file" \
475            || cp -p $$d/$$file "$(distdir)/$$file" \
476            || exit 1; \
477          fi; \
478        done
479        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
480          if test "$$subdir" = .; then :; else \
481            $(am__make_dryrun) \
482              || test -d "$(distdir)/$$subdir" \
483              || $(MKDIR_P) "$(distdir)/$$subdir" \
484              || exit 1; \
485            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
486            $(am__relativize); \
487            new_distdir=$$reldir; \
488            dir1=$$subdir; dir2="$(top_distdir)"; \
489            $(am__relativize); \
490            new_top_distdir=$$reldir; \
491            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
492            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
493            ($(am__cd) $$subdir && \
494              $(MAKE) $(AM_MAKEFLAGS) \
495                top_distdir="$$new_top_distdir" \
496                distdir="$$new_distdir" \
497                am__remove_distdir=: \
498                am__skip_length_check=: \
499                am__skip_mode_fix=: \
500                distdir) \
501              || exit 1; \
502          fi; \
503        done
504check-am: all-am
505check: check-recursive
506all-am: Makefile all-local
507installdirs: installdirs-recursive
508installdirs-am:
509install: install-recursive
510install-exec: install-exec-recursive
511install-data: install-data-recursive
512uninstall: uninstall-recursive
513
514install-am: all-am
515        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
516
517installcheck: installcheck-recursive
518install-strip:
519        if test -z '$(STRIP)'; then \
520          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
521            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
522              install; \
523        else \
524          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
525            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
526            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
527        fi
528mostlyclean-generic:
529
530clean-generic:
531        -test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
532
533distclean-generic:
534        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
535        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
536
537maintainer-clean-generic:
538        @echo "This command is intended for maintainers to use"
539        @echo "it deletes files that may require special tools to rebuild."
540clean: clean-recursive
541
542clean-am: clean-generic clean-libtool mostlyclean-am
543
544distclean: distclean-recursive
545        -rm -f Makefile
546distclean-am: clean-am distclean-generic distclean-tags
547
548dvi: dvi-recursive
549
550dvi-am:
551
552html: html-recursive
553
554html-am:
555
556info: info-recursive
557
558info-am:
559
560install-data-am:
561
562install-dvi: install-dvi-recursive
563
564install-dvi-am:
565
566install-exec-am:
567
568install-html: install-html-recursive
569
570install-html-am:
571
572install-info: install-info-recursive
573
574install-info-am:
575
576install-man:
577
578install-pdf: install-pdf-recursive
579
580install-pdf-am:
581
582install-ps: install-ps-recursive
583
584install-ps-am:
585
586installcheck-am:
587
588maintainer-clean: maintainer-clean-recursive
589        -rm -f Makefile
590maintainer-clean-am: distclean-am maintainer-clean-generic
591
592mostlyclean: mostlyclean-recursive
593
594mostlyclean-am: mostlyclean-generic mostlyclean-libtool
595
596pdf: pdf-recursive
597
598pdf-am:
599
600ps: ps-recursive
601
602ps-am:
603
604uninstall-am:
605
606.MAKE: $(am__recursive_targets) install-am install-strip
607
608.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am all-local \
609        check check-am clean clean-generic clean-libtool cscopelist-am \
610        ctags ctags-am distclean distclean-generic distclean-libtool \
611        distclean-tags distdir dvi dvi-am html html-am info info-am \
612        install install-am install-data install-data-am install-dvi \
613        install-dvi-am install-exec install-exec-am install-html \
614        install-html-am install-info install-info-am install-man \
615        install-pdf install-pdf-am install-ps install-ps-am \
616        install-strip installcheck installcheck-am installdirs \
617        installdirs-am maintainer-clean maintainer-clean-generic \
618        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
619        ps ps-am tags tags-am uninstall uninstall-am
620
621
622all-local: ipsec-tools.spec
623
624ipsec-tools.spec: ipsec-tools.spec.in Makefile
625        rm -f $@.tmp
626        sed < $< > $@.tmp \
627            -e 's:@-VERSION-@:${VERSION}:'
628        mv $@.tmp $@
629
630# Tell versions [3.59,3.63) of GNU make to not export all variables.
631# Otherwise a system limit (for SysV at least) may be exceeded.
632.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.