source: rtems-libbsd/freebsd/sys/dev/usb/usb_transfer.h @ e599318

4.1155-freebsd-126-freebsd-12freebsd-9.3
Last change on this file since e599318 was e599318, checked in by Sebastian Huber <sebastian.huber@…>, on 10/09/13 at 20:52:54

Update files to match FreeBSD layout

Add compatibility with Newlib header files. Some FreeBSD header files
are mapped by the translation script:

o rtems/bsd/sys/_types.h
o rtems/bsd/sys/errno.h
o rtems/bsd/sys/lock.h
o rtems/bsd/sys/param.h
o rtems/bsd/sys/resource.h
o rtems/bsd/sys/time.h
o rtems/bsd/sys/timespec.h
o rtems/bsd/sys/types.h
o rtems/bsd/sys/unistd.h

It is now possible to include <sys/socket.h> directly for example.

Generate one Makefile which builds everything including tests.

  • Property mode set to 100644
File size: 5.0 KB
Line 
1/* $FreeBSD$ */
2/*-
3 * Copyright (c) 2008 Hans Petter Selasky. All rights reserved.
4 *
5 * Redistribution and use in source and binary forms, with or without
6 * modification, are permitted provided that the following conditions
7 * are met:
8 * 1. Redistributions of source code must retain the above copyright
9 *    notice, this list of conditions and the following disclaimer.
10 * 2. Redistributions in binary form must reproduce the above copyright
11 *    notice, this list of conditions and the following disclaimer in the
12 *    documentation and/or other materials provided with the distribution.
13 *
14 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR AND CONTRIBUTORS ``AS IS'' AND
15 * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
16 * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
17 * ARE DISCLAIMED.  IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE
18 * FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
19 * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
20 * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
21 * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT
22 * LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
23 * OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF
24 * SUCH DAMAGE.
25 */
26
27#ifndef _USB_TRANSFER_H_
28#define _USB_TRANSFER_H_
29
30/*
31 * The following structure defines the messages that is used to signal
32 * the "done_p" USB process.
33 */
34struct usb_done_msg {
35        struct usb_proc_msg hdr;
36        struct usb_xfer_root *xroot;
37};
38
39#define USB_DMATAG_TO_XROOT(dpt)                                \
40  ((struct usb_xfer_root *)(                                    \
41   ((uint8_t *)(dpt)) -                                         \
42   ((uint8_t *)&((struct usb_xfer_root *)0)->dma_parent_tag)))
43
44/*
45 * The following structure is used to keep information about memory
46 * that should be automatically freed at the moment all USB transfers
47 * have been freed.
48 */
49struct usb_xfer_root {
50        struct usb_dma_parent_tag dma_parent_tag;
51#if USB_HAVE_BUSDMA
52        struct usb_xfer_queue dma_q;
53#endif
54        struct usb_xfer_queue done_q;
55        struct usb_done_msg done_m[2];
56        struct cv cv_drain;
57
58        struct usb_process *done_p;     /* pointer to callback process */
59        void   *memory_base;
60        struct mtx *xfer_mtx;   /* cannot be changed during operation */
61#if USB_HAVE_BUSDMA
62        struct usb_page_cache *dma_page_cache_start;
63        struct usb_page_cache *dma_page_cache_end;
64#endif
65        struct usb_page_cache *xfer_page_cache_start;
66        struct usb_page_cache *xfer_page_cache_end;
67        struct usb_bus *bus;            /* pointer to USB bus (cached) */
68        struct usb_device *udev;        /* pointer to USB device */
69
70        usb_size_t memory_size;
71        usb_size_t setup_refcount;
72#if USB_HAVE_BUSDMA
73        usb_frcount_t dma_nframes;      /* number of page caches to load */
74        usb_frcount_t dma_currframe;    /* currect page cache number */
75        usb_frlength_t dma_frlength_0;  /* length of page cache zero */
76        uint8_t dma_error;              /* set if virtual memory could not be
77                                         * loaded */
78#endif
79        uint8_t done_sleep;             /* set if done thread is sleeping */
80};
81
82/*
83 * The following structure is used when setting up an array of USB
84 * transfers.
85 */
86struct usb_setup_params {
87        struct usb_dma_tag *dma_tag_p;
88        struct usb_page *dma_page_ptr;
89        struct usb_page_cache *dma_page_cache_ptr;      /* these will be
90                                                         * auto-freed */
91        struct usb_page_cache *xfer_page_cache_ptr;     /* these will not be
92                                                         * auto-freed */
93        struct usb_device *udev;
94        struct usb_xfer *curr_xfer;
95        const struct usb_config *curr_setup;
96        const struct usb_pipe_methods *methods;
97        void   *buf;
98        usb_frlength_t *xfer_length_ptr;
99
100        usb_size_t size[7];
101        usb_frlength_t bufsize;
102        usb_frlength_t bufsize_max;
103
104        uint32_t hc_max_frame_size;
105        uint16_t hc_max_packet_size;
106        uint8_t hc_max_packet_count;
107        enum usb_dev_speed speed;
108        uint8_t dma_tag_max;
109        usb_error_t err;
110};
111
112/* function prototypes */
113
114uint8_t usbd_transfer_setup_sub_malloc(struct usb_setup_params *parm,
115            struct usb_page_cache **ppc, usb_size_t size, usb_size_t align,
116            usb_size_t count);
117void    usb_dma_delay_done_cb(struct usb_xfer *);
118void    usb_command_wrapper(struct usb_xfer_queue *pq,
119            struct usb_xfer *xfer);
120void    usbd_pipe_enter(struct usb_xfer *xfer);
121void    usbd_pipe_start(struct usb_xfer_queue *pq);
122void    usbd_transfer_dequeue(struct usb_xfer *xfer);
123void    usbd_transfer_done(struct usb_xfer *xfer, usb_error_t error);
124void    usbd_transfer_enqueue(struct usb_xfer_queue *pq,
125            struct usb_xfer *xfer);
126void    usbd_transfer_setup_sub(struct usb_setup_params *parm);
127void    usbd_ctrl_transfer_setup(struct usb_device *udev);
128void    usbd_clear_stall_locked(struct usb_device *udev,
129            struct usb_endpoint *ep);
130void    usbd_clear_data_toggle(struct usb_device *udev,
131            struct usb_endpoint *ep);
132usb_callback_t usbd_do_request_callback;
133usb_callback_t usb_handle_request_callback;
134usb_callback_t usb_do_clear_stall_callback;
135void    usbd_transfer_timeout_ms(struct usb_xfer *xfer,
136            void (*cb) (void *arg), usb_timeout_t ms);
137usb_timeout_t usbd_get_dma_delay(struct usb_device *udev);
138void    usbd_transfer_power_ref(struct usb_xfer *xfer, int val);
139
140#endif                                  /* _USB_TRANSFER_H_ */
Note: See TracBrowser for help on using the repository browser.