source: rtems-libbsd/freebsd/contrib/wpa/src/common/qca-vendor.h @ 9c9d11b

55-freebsd-126-freebsd-12
Last change on this file since 9c9d11b was 9c9d11b, checked in by Sichen Zhao <1473996754@…>, on 08/01/17 at 12:43:41

Import wpa from FreeBSD
  • Property mode set to 100644
File size: 14.0 KB
Line 
1/*
2 * Qualcomm Atheros OUI and vendor specific assignments
3 * Copyright (c) 2014-2015, Qualcomm Atheros, Inc.
4 *
5 * This software may be distributed under the terms of the BSD license.
6 * See README for more details.
7 */
8
9#ifndef QCA_VENDOR_H
10#define QCA_VENDOR_H
11
12/*
13 * This file is a registry of identifier assignments from the Qualcomm Atheros
14 * OUI 00:13:74 for purposes other than MAC address assignment. New identifiers
15 * can be assigned through normal review process for changes to the upstream
16 * hostap.git repository.
17 */
18
19#define OUI_QCA 0x001374
20
21/**
22 * enum qca_radiotap_vendor_ids - QCA radiotap vendor namespace IDs
23 */
24enum qca_radiotap_vendor_ids {
25        QCA_RADIOTAP_VID_WLANTEST = 0,
26};
27
28/**
29 * enum qca_nl80211_vendor_subcmds - QCA nl80211 vendor command identifiers
30 *
31 * @QCA_NL80211_VENDOR_SUBCMD_UNSPEC: Reserved value 0
32 *
33 * @QCA_NL80211_VENDOR_SUBCMD_TEST: Test command/event
34 *
35 * @QCA_NL80211_VENDOR_SUBCMD_ROAMING: Set roaming policy for drivers that use
36 *      internal BSS-selection. This command uses
37 *      @QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY to specify the new roaming policy
38 *      for the current connection (i.e., changes policy set by the nl80211
39 *      Connect command). @QCA_WLAN_VENDOR_ATTR_MAC_ADDR may optionally be
40 *      included to indicate which BSS to use in case roaming is disabled.
41 *
42 * @QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY: Recommendation of frequency
43 *      ranges to avoid to reduce issues due to interference or internal
44 *      co-existence information in the driver. The event data structure is
45 *      defined in struct qca_avoid_freq_list.
46 *
47 * @QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY: Command to check driver support
48 *      for DFS offloading.
49 *
50 * @QCA_NL80211_VENDOR_SUBCMD_NAN: NAN command/event which is used to pass
51 *      NAN Request/Response and NAN Indication messages. These messages are
52 *      interpreted between the framework and the firmware component.
53 *
54 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY: Set key operation that can be
55 *      used to configure PMK to the driver even when not connected. This can
56 *      be used to request offloading of key management operations. Only used
57 *      if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
58 *
59 * @QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH: An extended version of
60 *      NL80211_CMD_ROAM event with optional attributes including information
61 *      from offloaded key management operation. Uses
62 *      enum qca_wlan_vendor_attr_roam_auth attributes. Only used
63 *      if device supports QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD.
64 *
65 * @QCA_NL80211_VENDOR_SUBCMD_DO_ACS: ACS command/event which is used to
66 *      invoke the ACS function in device and pass selected channels to
67 *      hostapd.
68 *
69 * @QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES: Command to get the features
70 *      supported by the driver. enum qca_wlan_vendor_features defines
71 *      the possible features.
72 *
73 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED: Event used by driver,
74 *      which supports DFS offloading, to indicate a channel availability check
75 *      start.
76 *
77 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED: Event used by driver,
78 *      which supports DFS offloading, to indicate a channel availability check
79 *      completion.
80 *
81 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED: Event used by driver,
82 *      which supports DFS offloading, to indicate that the channel availability
83 *      check aborted, no change to the channel status.
84 *
85 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED: Event used by
86 *      driver, which supports DFS offloading, to indicate that the
87 *      Non-Occupancy Period for this channel is over, channel becomes usable.
88 *
89 * @QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED: Event used by driver,
90 *      which supports DFS offloading, to indicate a radar pattern has been
91 *      detected. The channel is now unusable.
92 */
93enum qca_nl80211_vendor_subcmds {
94        QCA_NL80211_VENDOR_SUBCMD_UNSPEC = 0,
95        QCA_NL80211_VENDOR_SUBCMD_TEST = 1,
96        /* subcmds 2..8 not yet allocated */
97        QCA_NL80211_VENDOR_SUBCMD_ROAMING = 9,
98        QCA_NL80211_VENDOR_SUBCMD_AVOID_FREQUENCY = 10,
99        QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY =  11,
100        QCA_NL80211_VENDOR_SUBCMD_NAN =  12,
101        QCA_NL80211_VENDOR_SUBMCD_STATS_EXT = 13,
102        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_SET = 14,
103        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_GET = 15,
104        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_CLR = 16,
105        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_RADIO_RESULTS = 17,
106        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_IFACE_RESULTS = 18,
107        QCA_NL80211_VENDOR_SUBCMD_LL_STATS_PEERS_RESULTS = 19,
108        QCA_NL80211_VENDOR_SUBCMD_GSCAN_START = 20,
109        QCA_NL80211_VENDOR_SUBCMD_GSCAN_STOP = 21,
110        QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_VALID_CHANNELS = 22,
111        QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CAPABILITIES = 23,
112        QCA_NL80211_VENDOR_SUBCMD_GSCAN_GET_CACHED_RESULTS = 24,
113        QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_RESULTS_AVAILABLE = 25,
114        QCA_NL80211_VENDOR_SUBCMD_GSCAN_FULL_SCAN_RESULT = 26,
115        QCA_NL80211_VENDOR_SUBCMD_GSCAN_SCAN_EVENT = 27,
116        QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_FOUND = 28,
117        QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_BSSID_HOTLIST = 29,
118        QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_BSSID_HOTLIST = 30,
119        QCA_NL80211_VENDOR_SUBCMD_GSCAN_SIGNIFICANT_CHANGE = 31,
120        QCA_NL80211_VENDOR_SUBCMD_GSCAN_SET_SIGNIFICANT_CHANGE = 32,
121        QCA_NL80211_VENDOR_SUBCMD_GSCAN_RESET_SIGNIFICANT_CHANGE = 33,
122        QCA_NL80211_VENDOR_SUBCMD_TDLS_ENABLE = 34,
123        QCA_NL80211_VENDOR_SUBCMD_TDLS_DISABLE = 35,
124        QCA_NL80211_VENDOR_SUBCMD_TDLS_GET_STATUS = 36,
125        QCA_NL80211_VENDOR_SUBCMD_TDLS_STATE = 37,
126        QCA_NL80211_VENDOR_SUBCMD_GET_SUPPORTED_FEATURES = 38,
127        QCA_NL80211_VENDOR_SUBCMD_SCANNING_MAC_OUI = 39,
128        QCA_NL80211_VENDOR_SUBCMD_NO_DFS_FLAG = 40,
129        QCA_NL80211_VENDOR_SUBCMD_GSCAN_HOTLIST_AP_LOST = 41,
130        QCA_NL80211_VENDOR_SUBCMD_GET_CONCURRENCY_MATRIX = 42,
131        /* 43..49 - reserved for QCA */
132        QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_SET_KEY = 50,
133        QCA_NL80211_VENDOR_SUBCMD_KEY_MGMT_ROAM_AUTH = 51,
134        QCA_NL80211_VENDOR_SUBCMD_APFIND = 52,
135        /* 53 - reserved - was used by QCA, but not in use anymore */
136        QCA_NL80211_VENDOR_SUBCMD_DO_ACS = 54,
137        QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES = 55,
138        QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_STARTED = 56,
139        QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_FINISHED = 57,
140        QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_ABORTED = 58,
141        QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_CAC_NOP_FINISHED = 59,
142        QCA_NL80211_VENDOR_SUBCMD_DFS_OFFLOAD_RADAR_DETECTED = 60,
143        /* 61-90 - reserved for QCA */
144        QCA_NL80211_VENDOR_SUBCMD_DATA_OFFLOAD = 91,
145        QCA_NL80211_VENDOR_SUBCMD_OCB_SET_CONFIG = 92,
146        QCA_NL80211_VENDOR_SUBCMD_OCB_SET_UTC_TIME = 93,
147        QCA_NL80211_VENDOR_SUBCMD_OCB_START_TIMING_ADVERT = 94,
148        QCA_NL80211_VENDOR_SUBCMD_OCB_STOP_TIMING_ADVERT = 95,
149        QCA_NL80211_VENDOR_SUBCMD_OCB_GET_TSF_TIMER = 96,
150        QCA_NL80211_VENDOR_SUBCMD_DCC_GET_STATS = 97,
151        QCA_NL80211_VENDOR_SUBCMD_DCC_CLEAR_STATS = 98,
152        QCA_NL80211_VENDOR_SUBCMD_DCC_UPDATE_NDL = 99,
153        QCA_NL80211_VENDOR_SUBCMD_DCC_STATS_EVENT = 100,
154        QCA_NL80211_VENDOR_SUBCMD_LINK_PROPERTIES = 101,
155        QCA_NL80211_VENDOR_SUBCMD_GW_PARAM_CONFIG = 102,
156        QCA_NL80211_VENDOR_SUBCMD_GET_PREFERRED_FREQ_LIST = 103,
157        QCA_NL80211_VENDOR_SUBCMD_SET_PROBABLE_OPER_CHANNEL = 104,
158        QCA_NL80211_VENDOR_SUBCMD_SETBAND = 105,
159};
160
161
162enum qca_wlan_vendor_attr {
163        QCA_WLAN_VENDOR_ATTR_INVALID = 0,
164        /* used by QCA_NL80211_VENDOR_SUBCMD_DFS_CAPABILITY */
165        QCA_WLAN_VENDOR_ATTR_DFS     = 1,
166        /* used by QCA_NL80211_VENDOR_SUBCMD_NAN */
167        QCA_WLAN_VENDOR_ATTR_NAN     = 2,
168        /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
169        QCA_WLAN_VENDOR_ATTR_STATS_EXT     = 3,
170        /* used by QCA_NL80211_VENDOR_SUBCMD_STATS_EXT */
171        QCA_WLAN_VENDOR_ATTR_IFINDEX     = 4,
172        /* used by QCA_NL80211_VENDOR_SUBCMD_ROAMING, u32 with values defined
173         * by enum qca_roaming_policy. */
174        QCA_WLAN_VENDOR_ATTR_ROAMING_POLICY = 5,
175        QCA_WLAN_VENDOR_ATTR_MAC_ADDR = 6,
176        /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
177        QCA_WLAN_VENDOR_ATTR_FEATURE_FLAGS = 7,
178        QCA_WLAN_VENDOR_ATTR_TEST = 8,
179        /* used by QCA_NL80211_VENDOR_SUBCMD_GET_FEATURES */
180        /* Unsigned 32-bit value. */
181        QCA_WLAN_VENDOR_ATTR_CONCURRENCY_CAPA = 9,
182        /* Unsigned 32-bit value */
183        QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_2_4_BAND = 10,
184        /* Unsigned 32-bit value */
185        QCA_WLAN_VENDOR_ATTR_MAX_CONCURRENT_CHANNELS_5_0_BAND = 11,
186        /* Unsigned 32-bit value from enum qca_set_band. */
187        QCA_WLAN_VENDOR_ATTR_SETBAND_VALUE = 12,
188        /* keep last */
189        QCA_WLAN_VENDOR_ATTR_AFTER_LAST,
190        QCA_WLAN_VENDOR_ATTR_MAX        = QCA_WLAN_VENDOR_ATTR_AFTER_LAST - 1,
191};
192
193
194enum qca_roaming_policy {
195        QCA_ROAMING_NOT_ALLOWED,
196        QCA_ROAMING_ALLOWED_WITHIN_ESS,
197};
198
199enum qca_wlan_vendor_attr_roam_auth {
200        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_INVALID = 0,
201        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_BSSID,
202        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_REQ_IE,
203        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_RESP_IE,
204        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AUTHORIZED,
205        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_KEY_REPLAY_CTR,
206        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KCK,
207        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_PTK_KEK,
208        /* keep last */
209        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST,
210        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_MAX =
211        QCA_WLAN_VENDOR_ATTR_ROAM_AUTH_AFTER_LAST - 1
212};
213
214enum qca_wlan_vendor_attr_acs_offload {
215        QCA_WLAN_VENDOR_ATTR_ACS_CHANNEL_INVALID = 0,
216        QCA_WLAN_VENDOR_ATTR_ACS_PRIMARY_CHANNEL,
217        QCA_WLAN_VENDOR_ATTR_ACS_SECONDARY_CHANNEL,
218        QCA_WLAN_VENDOR_ATTR_ACS_HW_MODE,
219        QCA_WLAN_VENDOR_ATTR_ACS_HT_ENABLED,
220        QCA_WLAN_VENDOR_ATTR_ACS_HT40_ENABLED,
221        QCA_WLAN_VENDOR_ATTR_ACS_VHT_ENABLED,
222        QCA_WLAN_VENDOR_ATTR_ACS_CHWIDTH,
223        QCA_WLAN_VENDOR_ATTR_ACS_CH_LIST,
224        QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG0_CENTER_CHANNEL,
225        QCA_WLAN_VENDOR_ATTR_ACS_VHT_SEG1_CENTER_CHANNEL,
226        QCA_WLAN_VENDOR_ATTR_ACS_FREQ_LIST,
227        /* keep last */
228        QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST,
229        QCA_WLAN_VENDOR_ATTR_ACS_MAX =
230        QCA_WLAN_VENDOR_ATTR_ACS_AFTER_LAST - 1
231};
232
233enum qca_wlan_vendor_acs_hw_mode {
234        QCA_ACS_MODE_IEEE80211B,
235        QCA_ACS_MODE_IEEE80211G,
236        QCA_ACS_MODE_IEEE80211A,
237        QCA_ACS_MODE_IEEE80211AD,
238        QCA_ACS_MODE_IEEE80211ANY,
239};
240
241/**
242 * enum qca_wlan_vendor_features - Vendor device/driver feature flags
243 *
244 * @QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD: Device supports key
245 *      management offload, a mechanism where the station's firmware
246 *      does the exchange with the AP to establish the temporal keys
247 *      after roaming, rather than having the user space wpa_supplicant do it.
248 * @QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY: Device supports automatic
249 *      band selection based on channel selection results.
250 * @NUM_QCA_WLAN_VENDOR_FEATURES: Number of assigned feature bits
251 */
252enum qca_wlan_vendor_features {
253        QCA_WLAN_VENDOR_FEATURE_KEY_MGMT_OFFLOAD        = 0,
254        QCA_WLAN_VENDOR_FEATURE_SUPPORT_HW_MODE_ANY     = 1,
255        NUM_QCA_WLAN_VENDOR_FEATURES /* keep last */
256};
257
258/**
259 * enum qca_wlan_vendor_attr_data_offload_ind - Vendor Data Offload Indication
260 *
261 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION: Session corresponding to
262 *      the offloaded data.
263 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL: Protocol of the offloaded
264 *      data.
265 * @QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT: Event type for the data offload
266 *      indication.
267 */
268enum qca_wlan_vendor_attr_data_offload_ind {
269        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_INVALID = 0,
270        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_SESSION,
271        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_PROTOCOL,
272        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_EVENT,
273
274        /* keep last */
275        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST,
276        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_MAX =
277        QCA_WLAN_VENDOR_ATTR_DATA_OFFLOAD_IND_AFTER_LAST - 1
278};
279
280enum qca_vendor_attr_get_preferred_freq_list {
281        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_INVALID,
282        /* A 32-unsigned value; the interface type/mode for which the preferred
283         * frequency list is requested (see enum qca_iface_type for possible
284         * values); used in GET_PREFERRED_FREQ_LIST command from user-space to
285         * kernel and in the kernel response back to user-space.
286         */
287        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_IFACE_TYPE,
288        /* An array of 32-unsigned values; values are frequency (MHz); sent
289         * from kernel space to user space.
290         */
291        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST,
292        /* keep last */
293        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST,
294        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_MAX =
295        QCA_WLAN_VENDOR_ATTR_GET_PREFERRED_FREQ_LIST_AFTER_LAST - 1
296};
297
298enum qca_vendor_attr_probable_oper_channel {
299        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_INVALID,
300        /* 32-bit unsigned value; indicates the connection/iface type likely to
301         * come on this channel (see enum qca_iface_type).
302         */
303        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_IFACE_TYPE,
304        /* 32-bit unsigned value; the frequency (MHz) of the probable channel */
305        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_FREQ,
306        /* keep last */
307        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST,
308        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_MAX =
309        QCA_WLAN_VENDOR_ATTR_PROBABLE_OPER_CHANNEL_AFTER_LAST - 1
310};
311
312enum qca_iface_type {
313        QCA_IFACE_TYPE_STA,
314        QCA_IFACE_TYPE_AP,
315        QCA_IFACE_TYPE_P2P_CLIENT,
316        QCA_IFACE_TYPE_P2P_GO,
317        QCA_IFACE_TYPE_IBSS,
318        QCA_IFACE_TYPE_TDLS,
319};
320
321enum qca_set_band {
322        QCA_SETBAND_AUTO,
323        QCA_SETBAND_5G,
324        QCA_SETBAND_2G,
325};
326
327/* IEEE 802.11 Vendor Specific elements */
328
329/**
330 * enum qca_vendor_element_id - QCA Vendor Specific element types
331 *
332 * These values are used to identify QCA Vendor Specific elements. The
333 * payload of the element starts with the three octet OUI (OUI_QCA) and
334 * is followed by a single octet type which is defined by this enum.
335 *
336 * @QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST: P2P preferred channel list.
337 *      This element can be used to specify preference order for supported
338 *      channels. The channels in this list are in preference order (the first
339 *      one has the highest preference) and are described as a pair of
340 *      (global) Operating Class and Channel Number (each one octet) fields.
341 *
342 *      This extends the standard P2P functionality by providing option to have
343 *      more than one preferred operating channel. When this element is present,
344 *      it replaces the preference indicated in the Operating Channel attribute.
345 *      For supporting other implementations, the Operating Channel attribute is
346 *      expected to be used with the highest preference channel. Similarly, all
347 *      the channels included in this Preferred channel list element are
348 *      expected to be included in the Channel List attribute.
349 *
350 *      This vendor element may be included in GO Negotiation Request, P2P
351 *      Invitation Request, and Provision Discovery Request frames.
352 */
353enum qca_vendor_element_id {
354        QCA_VENDOR_ELEM_P2P_PREF_CHAN_LIST = 0,
355};
356
357#endif /* QCA_VENDOR_H */
Note: See TracBrowser for help on using the repository browser.